新型吡啶基修饰的尾式卟啉的合成及性质

报道了一种新型尾式锌卟啉(o-PyOC₆H₁₂OTPPZn)的合成及表征, 采用紫外-可见光谱滴定法对该化合物与5种吡啶类小分子间的轴向配位反应的热力学性质进行了研究. 轴配体系的热力学数据显示, 5种吡啶类配体的平衡常数按K(4-MePy)>K(Py)>K(3-MePy)>K(2,4,6-triMePy)>K(2-MePy)依次减小, 吡啶类小分子对主体的配位能力按4-MePy>Py>3-MePy>2,4,6-triMePy>2-MePy依次减弱, 同时分子模拟的理论研究得到了与实验完全一致的结果. 通过Z-扫描实验对该化合物的非线性光学性质的研究表明, 该样品具有较强的反饱和吸收特征.     

噻吩基卟啉衍生物的单光子和双光子吸收性质的理论研究

本文理论上研究了两个系列的噻吩基卟啉衍生物,这种衍生物在可见光区具有大的双光子吸收截面。用密度泛函理论和ZINDO-SOS方法,计算了分子的几何构型、电子结构,单光子和双光子吸收性质。结果显示噻吩单元的数目影响分子的单光子和双光子吸收性质。具有两个或三个噻吩基团的噻吩基卟啉衍生物在较大范围内具有可用于实际应用中的双光子吸收响应,这一性质有利于这类分子在光限幅中的应用。插入乙炔基有利于扩大共轭范围,增加分子的双光子吸收截面。同时,乙炔基团的加入导致了单光子和双光子波长的红移。从高透明性和相对大的非线性光学响应考虑,噻吩基卟啉衍生物是一类有应用前景的双光子吸收材料。     

Evidence for the Chain‐Growth Synthesis of Statistical π‐Conjugated Donor–Acceptor Copolymers

The synthesis of a series of dithienosilole–benzotriazole donor–acceptor statistical copolymers with various donor–acceptor ratios is reported, prepared by Kumada catalyst‐transfer polymerization. Statistical copolymer structure is verified by ¹H NMR and optical absorption spectroscopy, and supported by density functional theory (DFT) calculations. The copolymers exhibit a single optical absorption band that lies between dithienosilole and benzotriazole homopolymers, which shifts with varying donor–acceptor content. A chain extension experiment using a partially consumed benzotriazole solution as a macroinitiator followed by addition of dithienosilole leads to the synthesis of a statistical dithienosilole–benzotriazole block copolymer from a pure benzotriazole block, demonstrating that both chain extension and simultaneous monomer incorporation are possible using this methodology.

     

噻唑类生色分子的电子光谱和非线性光学性质

在B3LYP/6-31+G*水平上对八种噻唑类生色分子的电子光谱与二阶非线性光学性质茁进行计算研究. 结果表明, 含羟乙基、烷氧乙基、氟乙基和氨乙基活性基团的噻唑类分子具有大的β值, 为1.6×10-28 esu左右, 与实验结果基本一致. 气相中的最大吸收波长λmax位于480-488 nm范围内. 含羟乙基活性基团的噻唑分子, 随溶剂极性增大, λmax有红移趋势.     

Determination of trace amounts of sodium and lithium in zirconium dioxide (ZrO2) using liquid electrode plasma optical emission spectrometry

This paper describes a quantitative measurement of trace elements (Na, Li) in high purity zirconium dioxide powder using liquid electrode plasma optical emission spectrometry (LEP-OES). Conventionally, for such type of measurements, inductively coupled plasma optical emission spectrometry (ICP-OES) is frequently employed. The detection limits of elements in zirconium by ICP-OES are degraded due to the spectra interference between the trace elements and zirconium of the matrix, because zirconium is a line rich element in spectra obtained by ICP-OES. LEP-OES is an elemental analysis method developed by the authors. The measurement principle is simple, as follows. Sample solution is put into a narrow channel on a small cuvette and voltage pulse is applied from both ends of the channel. At the center of the channel which is made narrower, the voltage and current are concentrated there, and plasma is generated. From the emission of the plasma, the quantitative analysis of the elements in the solution is achieved. The LEP-OES has the property that the emission of zirconium is relatively weak, so that highly sensitive measurement of trace elements in zirconium matrix can be conducted without interference. Sample solution is prepared by dissolving high purity zirconium dioxide powder and trace amounts of Na or Li with sulfuric acid. The voltage dependence and the pulse width dependence of optical emission spectra are also investigated. With increase of the voltage or the pulse width, the ratio of emission intensities of Na to those of hydrogen increases. This suggests that the ratio of sensitivity of two elements is variable, that means the element selectivity is controllable to some extent by the measurement conditions in LEP-OES. In the case of Na and H, the ratio can be controlled from 7.4 to 21.6%. Finally, the detection limits (3S.D.) of the trace elements, Na and Li, in 4000 μg g⁻¹ zirconium dioxide aqueous solution are found to be 0.02 and 0.133 μg g⁻¹, respectively. These values correspond to 5 μg g⁻¹ for Na, 33.25 μg g⁻¹ for Li in original high purity zirconium dioxide powder. The correlation coefficient of calibration curve was 0.995 for Na, 0.985 for Li. Those are comparable to the literature values of detection limits using ICP-OES.     

Synthesis of 5-aryl-5′-formyl-2,2′-bithiophenes as new precursors for nonlinear optical (NLO) materials

A series of formyl-substituted 5-aryl-2,2′-bithiophenes 5 were synthesized using two different methods: Vilsmeier-Haack-Arnold reaction (VHA) or through Suzuki coupling. The synthesis of compounds 5 through the Vilsmeier-Haack-Arnold reaction, starting from inexpensive and easily available precursors such as acetophenones, gave the title compounds in low yields after four reaction steps. On the other hand Suzuki coupling of functionalized arylboronic acids 7 and the 5-bromo-5′-formyl-2,2′-bithiophene 6 gave compounds 5 in good yields in only one step.     

大气压下甲烷火花放电制乙炔和合成气

用大气压下火花放电方法和发射光谱原位诊断技术, 对CH₄直接转化制乙炔和间接转化制合成气进行了研究, 并与介质阻挡放电进行了比较。结果表明, 火花放电具有能量效率高的突出优点, 能够高效地将CH₄活化成C原子、H原子和C₂等活泼物种。当CH₄单独进料时, 能得到以C₂H₂为主的烃类产物。当CH₄与CO₂和O₂共进料时, 能得到H₂/CO比值可调的合成气产物。在用火花放电转化CH₄和CO₂制合成气时, 添加O₂能够避免反应器的结炭问题, 反应温度只需225 ℃, 与常规催化法相比具有明显的低温优势。     

Effect of Glass Substrates on the Formation of Gold-Silver Colloids in Nanocomposite Thin Films

A sol-gel route to synthesize nanocomposite thin films containing phase separated metal colloids of gold (Au) and silver (Ag) was developed. Ag—Au colloids were prepared in silica films using dip coating technique. The annealing of the samples in air results in the formation of phase separated Ag and Au colloids in SiO₂ thin films, showing the surface plasmon peaks at 410 nm and 528 nm. For the synthesis of phase separated Ag and Au colloids on float glass substrates, formation of the silver colloids was found strongly dependent on the surface of the float glass. On the tin rich surface formation of both gold and silver colloids took place, whereas, on the tin poor surface the formation of only gold colloids was observed. The surface dependence of the formation of silver colloids was attributed to the presence of tin as Sn²⁺ state on the glass surface, which oxidizes into Sn⁴⁺ during heat treatment, reducing Ag⁺ into silver colloids.     

Time-resolved optical emission spectroscopic measurements of He plasma induced by a high-power CO2 pulsed laser

Laser-induced breakdown spectroscopy of helium plasma, initially at room temperature and pressures ranging from 12 to 101 kPa was investigated using a transverse excitation atmospheric CO₂ pulsed laser (λ = 9.621 and 10.591 μm, a full width at half maximum of 64 ns, and an intensity from 1.5 to 5.36 GW cm⁻²). The helium breakdown spectrum is mainly due to electronic relaxation of excited He, He⁺ and H. Plasma characteristics were examined in detail on the emission lines of He and He⁺ by the time-integrated and time-resolved optical emission spectroscopy technique. Optical breakdown threshold intensities, ionization degree and plasma temperatures were obtained. An auxiliary metal mesh target was used to analyze the temporal evolution of the species in the plasma. The results show a faster decay of the continuum emission and He⁺ species than in the case of neutral He atoms. The velocity and kinetic energy distributions for He and He⁺ species were obtained from time-of-flight measurements. Electron density in the laser-induced plasma was estimated from the analysis of spectral data at various times from the laser pulse incidence. Temporal evolution of electron density has been used for the estimation of the three-body electron-ion recombination rate constant.     

Determination of the helical screw sense and side-group chirality of a synthetic chiral polymer from Raman optical activity

Splitting it up: Excellent agreement between the experimental and the quantum-chemically simulated Raman optical activity (ROA) spectrum of (+)-poly(trityl methacrylate) shows that the polymer backbone adopts a left-handed helical conformation while the trityl side groups display a left-handed propeller conformation. Thus ROA can be used to determine the complete structure of synthetic chiral polymers in solution.