Actively mode-locked dual-wavelength fiber laser with close wavelength spacing using a fiber Bragg grating

A simple actively mode-locked fiber ring laser is proposed and successfully demonstrated to generate dual-wavelength picosecond pulses with close wavelength spacing using one Bragg grating in standard single-mode fiber. The proposed laser can be made to operate in stable dual-wavelength at room temperature, due to the birefringence characteristic of the FBG induced by transverse strain. Transverse strain loading on the FBG allows the wavelength spacing to be controlled. Generation of stable dual-wavelength pulses with a pulsewidth of 212–234 ps and a tunable wavelength separation from 0.2 to 0.44 nm at a pulse rate of 1.05 GHz was demonstrated.     

Finite element modal solutions of planar photonic crystal fibers with rectangular air-holes

Modal solutions of planar photonic crystal waveguides with rectangular air-holes are presented by using a rigorous full-vectorial finite element-based approach. The effective indices, mode field profiles, spot-sizes, power confinements, modal hybridness, beat lengths and group velocity dispersions are shown for the fundamental and higher order modes of the quasi-TE and TM polarizations.     

An experimental study of dynamic tensile properties of glass fiber at low-temperatures

Tensile impact experiments of EC8.0−24×7 glass fiber bundles at different low temperaturesT(14°C, −40°C and −10°C) and strain rates ɛ were carried out, and complete stress-strain curves were obtained. Within the range of the experiment temperatures and strain rates, it is found that the initial modulusE, the ultimate strength σ_max and the unstable strain ɛ _b of the glass fiber bundles all increase with ɛ at an identicalT. At an identical ɛ, with the decrease ofT, E and σ_max increase; but ɛ _b increases when 10°C>T>−40°C and decreases when −40°C>T>−100°C. The strain-rate- and temperature-dependent bimodal Weibull statistical constitutive theory was adopted for the statistical analysis of the experimental results, and the Weibull parameters of single fiber were obtained. The results show that the bimodal Weibull distribution function is suitable to represent the strength distribution of the glass fiber at low temperature and different strain rates. The differences in the mechanical properties between EC8.0−24×7 and EC5.5−12 ×14 glass fiber bundles were also discussed. Project supported by the National Natural Science Foundation of China (No. 19772058).     

光纤放大器增益饱和对有源光纤环形腔滤波特性的影响

从理论和实验两个方面研究了有源光纤环形腔滤波器输入光功率对光纤放大器增益的影响及由此引起的对有源光纤环形腔滤波特性的影响。在考虑上述影响的情况下 ,对有源光纤环形腔滤波器参数的优化作了讨论     

高精度的光纤衰减系数测试系统的设计

利用常规仪器设备，设计了一套集光、机、电为一体的光纤衰减测量,实现了数字化监测显示，并可与微机接口；采用双光路法，消除了由于光源光强不稳定产生的误差。     

Performance Enhancement for Optical Fast Frequency-hopping CDMA Systems by BCH Channel Coding

In this paper, the impact of optical beat noise on the performance of optical fast frequency-hopping code-division multiple-access (FFH OCDMA) networks is analyzed. BCH/FFH-OCDMA to reduce the impact of optical beat noise is proposed. It is shown that, BCH/FFH-OCDMA has much better performance under the same bit rate, same chip time and same number of available wavelengths. Another advantage for BCH/FFH-OCDMA is that the code length of one-coincidence sequence will be shorter, which can greatly reduce the difficulty of fabrication for fiber gratings.     

Lorentz-Compton佯谬与一个双赢判决性散射实验设计

通过对“可见光区域是否存在Compton效应”的讨论而进一步深化到经典条件下“光的量子理论能否包含光的经典电磁理论”的实验验证,发现了Lorentz-Compton佯谬,并基于逆Compton散射设计了一个敏感而又可行的双赢判决性散射实验来解决此佯谬。     

CCD摄像机大视场光学镜头的设计

为提高CCD摄像机的成像质量，同时使镜头结构紧凑、小型化，在大视场光学镜头的设计中，引入标准二次曲面和偶次非球面。根据初级像差理论，分析了非球面的位置、初始结构参数的求解规律。通过理论计算和ZEMAX光学设计软件的优化，给出工作波长为0.4～0.7μm、全视场角为80°，相对孔径为1∶1.5的镜头设计实例。该镜头由7块镜片组成，包括一个标准二次曲面和两个8次方非球面；在40lp/mm空间频率处的MTF值超过0.85，全视场畸变小于3％，像质优良     

1.5μm波段基于级联二阶非线性的铌酸锂光波导全光波长变换的理论分析

研究了基于级联二阶非线性的铌酸锂波导全光波长变换器的特性.首先从耦合模方程出发,比较了数值分析结果与小信号近似分析的结果.其次在数值分析基础上,分析了铌酸锂晶体的温度变化导致相应基频光波波长与极化反转光栅周期的变化关系.最后分析了在不同相互作用长度下,转换的光波功率与有效基频光波波长带宽、温度调谐带宽、极化反转光栅周期带宽等关系,以对全光波长变换器件进行优化设计 关键词： 级联二阶非线性 波长变换 准位相匹配 铌酸锂光波导     

Implementation of a Nonzero-order Joint Transform Correlator Using Interferometric Technique

The implementation of a nonzero-order joint transform correlator using the double port Mach-Zehnder interferometric technique is proposed and demonstrated. This approach provides on-line processing for directly removing the zero-order components of a joint power spectrum in one step and performs the nonzero-order optical correlation. Experimental results are presented and discussed.