2-苯基苯并咪唑衍生物非线性光学性质的从头算研究

采用HF／6-31G^*方法优化分子构型，在此基础上用CPHF方法系统地研究了多种基团取代的2-苯基苯并咪唑衍生物的二阶非线性光学系数βvec，并对βvdc的影响因素进行了探讨，为进一步设计综合性能优良的有机非线性光学材料提供理论指导．     

Fibre optic fluorometric enzyme sensors for hydrogen peroxide and lactate,based on horseradish peroxidase and lactate oxidase

An optical biosensor for the determination of hydrogen peroxide based on immobilized horseradish peroxidase is described. The fluorescence of the dimeric product of the enzyme catalysed oxidation of homovanillic acid is utilized to determine the concentration of H₂O₂. The membrane-bound enzyme is attached to a bifurcated fibre bundle permitting excitation and detection of the fluorescence by a fluorometer. The response of the sensor is linear from 1 to 130 M hydrogen peroxide; the coefficient of variation is 3%. The sensor is stable for more than 10 weeks. The operating pH for maximal sensor response is 8.15. This allows the sensor to be used in combination with oxidase reactions producing hydrogen peroxide, as is demonstrated with a co-immobilized lactate oxidase-horseradish peroxidase optode for the determination of L-lactate. The fluorescence intensity of this sensor depends linearly on the concentration of lactate between 3 and 200 M and a throughput of 10 samples per hour is possible. The precision is in the same range as that of the monoenzyme optode. The lifetime of the bienzyme sensor for lactate is considerably shorter than that of the peroxidase sensor; it is limited by the stability of the immobilized lactate oxidase enzyme. The sensor has been applied to the determination of lactate in control serum.     

Enhancement of the light-scattering ability of coatings by using hollow pigments

The light-scattering properties of coatings based on monodisperse polymeric spheres of two different diameters (ca 0.5 and 1 m) were evaluated from reflectance measurements as a function of the wavelength from 400 to 700 nm. Some of these plastic pigments were hollow and it was noted that these particles gave coatings with a greater light-scattering ability than coatings based on solid particles of a similar size. It was possible to estimate the contribution of the internal pores to the scattering ability of the coating layers by saturating the layers with an oil of a refractive index similar to that of the polymeric pigment particles. A simple model accounting for the scattering provided by the internal pores of the hollow particles is suggested. The agreement between the experimental results and the prediction of the model is fair. It was noted that the light scattering coefficient of the coatings increased when the external diameter of their constituent hollow particles increased from ca 0.5 to 1 m.     

A study on the bioactivity of chitosan/nano-hydroxyapatite composite scaffolds for bone tissue engineering

In order to increase the biocompatibility and bioactivity of chitosan, hydroxyapatite had been in situ combined into chitosan scaffolds. The bioactivity of the composite scaffolds was studied by examining the apatite formed on the scaffolds by incubating in simulated body fluid and the activity of preosteoblasts cultured on them. The apatite layer was assessed using scanning electronic microscope (SEM), X-ray diffraction (XRD), Fourier-Transformed Infrared spectroscopy (FTIR) and weight measurement. Composite analysis showed that after incubation in simulated body fluid on both of the scaffolds carbonate hydroxyapatite was formed. With increasing nano-hydroxyapatite content in the composite, the quantity of the apatite formed on the scaffolds increased. Compared with pure chitosan, the composite with nano-hydroxyapatite could form apatite more readily during the biomimetic process, which suggests that the composite possessed better mineralization activity. Furthermore, preosteoblast cells cultured on the apatite-coated scaffolds showed different behavior. On the apatite-coated composite scaffolds cells presented better proliferation than on apatite-coated chitosan scaffolds. In addition, alkaline phosphatase activities of cells cultured on the scaffolds in conditioned medium were assessed. The cells on composite scaffolds showed a higher alkaline phosphatase activity which suggested a higher differentiation level. The results indicated that the addition of nano-hydroxyapatite improved the bioactivity of chitosan/nano-hydroxyapatite composite scaffolds. On the other hand, that is to say composition of substrates could affect the apatite formation on them, and pre-loaded hydroxyapatite can enhance the apatite-coating. It will also be significant in preparation of apatite-coating polymer scaffolds for bone tissue engineering.     

PEO-LiClO_4-ZSM5 composite polymer electrolyte (IV): Polarized optical microscopy study

All solid-state lithium polymer batteries may be one of the best choices for the future electrochemical power source, characterized by high energy densities, good cyclability, reliability and safety[1,2]. Owing to its potential capability to replace the t…     

Coordination solids via assembly of adaptable components: systematic structural variation in alkaline earth organosulfonate networks

A family of alkaline earth organosulfonate coordination solids is reported. In contrast to more typical crystal engineering approaches, these solids are sustained by the assembly of building blocks that are coordinatively adaptable rather than rigid in their bonding preferences. The ligand, 4,5-dihydroxybenzene-1,3-disulfonate, L, progressively evolves from a 0D, 1D, 2D, to a 3D microporous network with the Group II cations Mg(2+), Ca(2+), Sr(2+), and Ba(2+), (compounds 1-4), respectively. This trend in dimensionality can be explained by considering factors such as hard-soft acid-base principles and cation radii, a rationalization which follows salient crystal engineering principles. The selective gas sorption properties of the microporous 3D network [Ba(L)(H(2)O)].H(2)O, 4, with different gaseous guests are also presented.     

Synthesis and photochemistry of side-chain liquid crystal polymers based on cinnamate esters

The syntheses of three methacrylate monomers with cinnamate ester side-chains and of a further monomer with a corresponding cinnamide side-chain are described. Two of the monomers, with isomeric structures, were thermotropic liquid crystals. Although the clearing points were very similar the crystal melting points differed by 8°C. One compound also exhibited a monotropic smectic phase, behavior not shown by its isomer. The other two monomers were not liquid crystalline. The monomers were polymerized by free radical polymerization, both as homopolymers and as copolymers with methyl methacrylate. In the case of one of the mesogenic ester monomers, copolymers with a cyanophenyl benzoate monomer were also prepared. Three of the four monomers formed thermotropic liquid crystalline homopolymers and the copolymers with the benzoate monomer were also liquid crystalline. The monomers were considered as photoactive components of polymeric liquid crystals. As a preliminary investigation of their photochemistry, copolymers with methyl methacrylate were prepared and irradiated in solution with a broad-band source. Under these conditions two of the materials show a facile photo-Fries rearrangement of the aryl cinnamate ester group. © 1992 John Wiley & Sons, Inc.     

Potassium-selective optrode based on an immobilized fluorogenic crown ether

A new optical sensor phase for potassium ions has been developed based on the immobilization of the pH-dependent fluorogenic crown ether 4-acryloylamidobenzo-18-crown-6 on the non-ionic polymeric resin Amberlite XAD-2.Two different optical designs, a flow-through sensor and a fibre optic probetype sensor (optrode), have been constructed and their analytical performance characteristics have been evaluated. The resulting fluorimetric sensors for K⁺ ions exhibited detection limits of 0.4 or 0.8 M of K⁺ (16 g/l or 31 g/l), depending on the design, while the linear response occurred from 1 to 25 M of the metal concentrations. The precision, evaluated as the relative standard deviation of measurements of K⁺ levels at around ten times the detection limit (e.g. 5 M), turned out to be around ±2%.Advantageous features of this fluorimetric sensing phase and optrode include ease of construction, simplicity of use, reversibility, short response times (ca. 1 min full scale deflection) selectivity and operational stability, suitable for sensing potassium at low levels in complex matrices such as biological fluids.The fluorimetric optical sensor has been successfully applied to the direct determination of potassium in clinically important samples (serum and urine) and in natural waters. Very good accuracy has been obtained just using adequate synthetic aqueous potassium standards for calibration.     

Optical Alignment of Organic Dopants in a Solid Gel Matrix: Dispersed and Grafted Rhodamine B Molecules

We study herein the rotational mobility of organic dye molecules and their ability to align on a strong optical electric field when they are encaged in the pores of an inorganic silica xerogel matrix. We compare the case of dye molecules simply dispersed in the pores of the gel—and possibly held by hydrogen bonds—to the case of molecules chemically grafted on the inner surface of these pores through covalent bonds. The study is led on hybrid silicon-zirconium based inorganic matrices doped with organic rhodamine B molecules. The stronger holding of the dopants when these are grafted to the matrix enhances the molecular alignment—and thus the induced anisotropy—as well as the remanence of this alignment. Furthermore, we show that submitting the samples to a supplementary drying at higher temperature tends to increase both the alignment anisotropy and its stability. We explain these results in terms of mobility of the molecules, in relation to their immediate environment.     

Preparation and Characterization of N-4-Nitrophenyl-L-prolinol Nanocrystals in Sol-Gel Matrices

Organic nanocrystals of N-4-nitrophenyl-l-prolinol (NPP) have been grown in sol-gel matrices prepared from silicon alkoxide precursors. Our process is based on the control of the nucleation and growth kinetics of the dye in the pores of dense gels. Nanocomposites gel-glasses are obtained with a high optical quality due to the small size of the nanocrystals (10-20 nm). Differential scanning calorimetry experiments evidenced clearly the melting point of NPP nanocrystals, which is registered 51°C above that of NPP powder. Micro-Raman and solid state NMR spectroscopies allowed us to demonstrate that our nanocrystallization process does not chemically modify NPP molecules. We specified also the nature of interactions existing between the NPP nanocrystals and the xerogels. These strong interactions, which explain the important increase of the melting point of the nanocrystals in comparison to the NPP powder, are hydrogen bonds between nitro groups of NPP and uncondensed silanol functions of the silicate network.