溶剂热法制备铜锌锡硫粉末及光学性能研究

以金属氯化物作为金属源,硫脲为硫源,乙二醇为溶剂,聚乙烯吡咯烷酮(PVP)为表面活性剂,采用溶剂热法在较低反应温度下合成了Cu2ZnSnS4(CZTS)粉末。利用X射线衍射仪(XRD)、拉曼光谱(Raman)、扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)对样品的结构和形貌进行表征。利用紫外-可见光谱(UV-Vis)对样品的光学性能进行研究。结果表明,180℃反应25小时的样品均为锌黄锡矿CZTS颗粒,颗粒形貌为表面花状的微球。当体系中PVP含量为0.2g时,微球尺寸约为2.5μm。当体系中PVP含量为0.3g,0.4g,0.5g时,微球尺寸大约为1.1μm。其中,PVP含量为0.4g的样品分散性较好,在可见区有明显的吸收,用外延法得到其禁带宽度约为1.45eV,与太阳能电池所需的最佳禁带宽度接近。     

无限包层Bragg光纤的传输模式研究

分析得到了横向电场分量和磁场分量所满足的耦合方程,对于介质折射率的不连续处,采用严格的边界条件来处理。基于全矢量模型,使用有限差分法编写了复模式的求解器,并将其应用于Bragg光纤的模式求解和分析。绘制出了Bragg光纤模式谱图,分类分析了在无限包层情况下Bragg光纤模式的基本特性。     

无光滤波六倍频微波信号产生的系统设计

基于两个级联偏振调制器,提出了一种高频谱纯度、稳定的六倍频微波信号产生方法。该方法通过适当调整偏振片的偏振方向、射频驱动信号电压和相位,实现无光滤波器条件下、任何波段六倍频微波信号的产生。利用Optisystem平台搭建的仿真系统,以S波段4 GHz信号为例,验证了该设计系统产生的六倍频信号质量,并分析了非理想射频驱动电压和相位对六倍频信号质量的影响,结果表明：该设计系统能产生最大光边带抑制比、射频无杂散抑制比分别为21.3,15.2 dB的六倍频微波信号;且非理想驱动电压和相位差的偏离应控制在理想值5%的范围之内。     

The 650-nm variable optical attenuator based on polymer/silica hybrid waveguide

Visible light variable optical attenuators(VOA) are essential devices in the application of channel power regulation and equalization in wavelength-division multiplexing cross-connect nodes in plastic optical fiber(POF) transmission systems.In this paper, a polymer/silica hybrid waveguide thermo–optic attenuator based on multimode interference(MMI) coupler is designed and fabricated to operate at 650 nm. The single-mode transmission condition, MMI coupler, and transition taper dimensions are optimized through the beam propagation method. Thermal analysis based on material properties provides the optimized heater placement angle. The fabricated VOA presents an attenuation of 26.5 dB with a 21-mW electrical input power at 650 nm. The rise time and fall time are 51.99 and 192 μs, respectively. The time–stability measurement results prove its working reliability.     

Effect of size and indium-composition on linear and nonlinear optical absorption of InGaN/GaN lens-shaped quantum dot

Based on the Schr ¨odinger equation for envelope function in the effective mass approximation, linear and nonlinear optical absorption coefficients in a multi-subband lens quantum dot are investigated. The effects of quantum dot size on the interband and intraband transitions energy are also analyzed. The finite element method is used to calculate the eigenvalues and eigenfunctions. Strain and In-mole-fraction effects are also studied, and the results reveal that with the decrease of the In-mole fraction, the amplitudes of linear and nonlinear absorption coefficients increase. The present computed results show that the absorption coefficients of transitions between the first excited states are stronger than those of the ground states. In addition, it has been found that the quantum dot size affects the amplitudes and peak positions of linear and nonlinear absorption coefficients while the incident optical intensity strongly affects the nonlinear absorption coefficients.     

带光纤环的分布式光纤拉曼温度系统

 为了抑制分布式光纤拉曼温度系统的温漂和瑞利散射光窜扰反斯托克斯散射光,在传感光纤前端盲区后放置光纤取样环,用瑞利散射光解调反斯托克斯散射光及用光纤取样环的温度计算光纤线上其它点的温度,提高了系统的测温精度和稳定性。采用功率100 mW,波长1.55 μm,脉宽10 ns脉冲激光器和15 dB前置光纤放大器,100M14bitA/D转换卡及DSP作数字平均构建光纤拉曼温度系统的实验,实现了测温误差在±0.03 ℃内。     

基于荧光分析的氨基甲酸酯类农药残留检测系统

通过对氨基甲酸酯类农药在紫外光照射下能够产生荧光的机理研究,设计了一种用于检测氨基甲酸酯类农药残留的荧光系统。该系统采用单光源、双光路结构,能够对测量信号和参考信号同时进行处理。采用所设计的筒式光纤探头激发并探测荧光,设计了相应的信号处理电路,实现了计算机管理。利用该系统和稳态光谱仪对西维因进行了对比实验。结果表明:在激发波长为319nm、荧光波长为654nm时,最小检测浓度为5×10-7μg/L。当西维因浓度范围在0.0～120.0μg/L之间时,系统具有较好的线性关系,线性相关系数r=0.9996(信噪比S/N=5)。该系统达到了荧光检测的指标。     

薄膜光学常数的模拟退火算法研究

在薄膜的光学参数拟合时，操作者给定的模型初值对拟合结果有很大的关系。采用广泛用于求解复杂系统优化问题的模拟退火算法来求解薄膜光学常数，降低了操作者给定拟合模型初值的要求。通过对常规的模拟退火算法以及非常快速的模拟退火方法(Very Fast Stimulated Annealing，VFSA)分析，针对性地在模型扰动及退火计划上存在的缺陷作了改进，提高了VFSA算法的计算稳健性。通过大量的拟合实践，验证了提出的改进模拟退火方法的有效性。     

光纤直接耦合微加工型可调光衰减器

设计研制了一种新型小体积, 低成本的光纤直接耦合微加工型可调光衰减器. 该器件采用电磁微线圈驱动柔性框架上的活动光纤微位移实现信号功率衰减变化, 驱动电压为0~8 V, 工作范围0~65 dB, 动态时间响应小于2.3 ms. 器件构造工艺主要使用了CNC高精度雕刻和激光点焊封装技术. 利用有限元单元法进行器件理论分析, 并报告了其测试性能.     

Strong dispersion of the surface optical phonon of silicon carbide in the near vicinity of the surface Brillouin zone center

The surface optical or Fuchs-Kliewer phonons of the (0 0 1) surface of 3C-SiC and the Si-terminated (0 0 0 1) surfaces of 4H- and 6H-SiC have been investigated with high resolution electron energy loss spectroscopy (HREELS). For each of the SiC polytypes the frequency of the surface optical phonon changes with surface reconstruction, indicating subtle differences in the static polarization at differently reconstructed surfaces. Due to their anisotropy, hexagonal surfaces exhibit a second, much weaker Fuchs-Kliewer mode. For all surfaces under examination, a linear dispersion of the Fuchs-Kliewer mode frequency has been found for wave vectors close to the -point. This dispersion can be explained by dynamical dipole coupling between atomic oscillators at the surface of the highly polar silicon carbide.