非线性物理简介:8.光学孤子及其在光纤通讯中的应用

本文介绍了光学孤子的形成、特性及其在光纤通讯中的应用．     

光纤加速度传感器研究进展

光纤加速度传感器与传统加速度传感器相比，不但能抗电磁干扰，而且体小、质轻、动态范围宽、精度高、能在恶劣环境下工作，因此受到各先进国家军事与商业领域的极大重视，各种实用的光纤加速度传感器不断涌现。主要有光强调制型和相位调制型两大类。光强调制式有反射式、透射式和偏振式等等。相位调制式有Ｍａｃｈ－Ｚｅｎｄｅｒ干涉仪、Ｍｉｃｈｅｌｓｏｎ干涉仪和Ｆａｂｒｙ－Ｐｅｒｏｔ干涉仪。有一维的，也有二维的；有与水听器组合在一起的，也有与光纤陀螺仪组合的光纤加速度传感器。最小的已经做到２．５ｃｍ长，直径仅０．２５ｍｍ；测量精度已能达到１μｇ；共振频率可达到１０ｋＨｚ。为了克服温度不稳定性对测量精度的影响，人们采用了３×３耦合器解调法，双光路法，由单臂式改成推挽式等。一旦关键技术得以克服，光纤加速度传感器将会在惯性导航和其它领域发挥更重要的作用。本文将分别介绍目前各种类型光纤加速度传感器的结构、特点、走向实用化存在的问题。     

Ce3+对Er3+/Yb3+共掺氟磷酸盐玻璃光谱性质的影响

研究了能量接受离子Ce³⁺对Er³⁺上转换发光强度以及Er³⁺在1.5μm附近波段发光性能参数的影响，并从能量匹配及能级结构角度出发对Er³⁺/Ce³⁺间的能量转移机制进行了分析.分析认为，⁴I_11/2能级的Er³⁺通过无辐射能量转移把能量传递给²F_5/2能级的Ce³⁺关键词： 氟磷酸盐玻璃 光谱性质 光纤放大器 3+和Ce³⁺')" href="#">Er³⁺和Ce³⁺     

倾斜Bragg光纤光栅反射谱特性理论和实验研究

光纤Bragg光栅在通信和传感领域有着广泛的应用。根据倾斜光纤Bragg光栅的结构特点，利用耦合模原理，运用传输矩阵法，模拟分析了倾斜角度对光纤Bragg光栅反射特性的影响，并用实验对模拟结果进行了验证。实验和模拟结果表明：随着倾斜角的增大，中心反射波长向长波方向移动，反射带宽变窄，反射率减小。这个结论对倾斜Bragg光纤光栅的生产和应用有一定的指导作用。     

端面泵浦掺Yb3+双包层光纤激光器

从双包层光纤激光器的速率方程出发，得到了光纤中泵浦光与激光的功率分布、输出功率与泵浦功率的关系、腔镜反射率及光纤长度对输出功率的影响。研究结果表明：输出激光功率与光纤长度及后腔镜反射率有很强的依赖关系，存在一个输出功率最大的最佳光纤长度。后腔镜反射率越大，输出激光功率越小；当光纤长度较短时，在输出端放置反射镜使泵浦光高反射，可以提高输出功率和效率。通过对端面泵浦掺Yb3+双包层光纤激光器进行理论分析和实验研究，得到输出激光的中心波长为1088.3nm，斜率效率为33.7%，最大输出功率为1.75W。     

Improved coating method for uniform polymer layer in infrared hollow fiber

An improved coating method was proposed in order to form a uniform polymer layer in the fabrication of cyclic olefin polymer-coated silver (COP/Ag) hollow fiber. A COP solution was flowed in a closed loop, in which the silver-coated tube was used as a part of the loop. Owing to the constant flowing speed of the COP solution and the airtight flowing environment, a COP layer was uniformly formed. The hollow fibers attain high performance and deliver multi-wavelength laser light from the infrared to the visible simultaneously. The method was successfully applied to the fabrication of practical hollow fibers with 2 m length for the near and mid-infrared lasers.     

荧光光纤温度传感器激励光源的选择

本文分析计算了荧光光纤温度传感器的温敏元件——GsAlAs/GaAs双异质结半导体材料的荧光辐射效率与激励光波长的关系。讨论了温度测量范围及温敏元件GaAlAs层铝含量对激励光源的限制,在0～200℃测温范围内,若采用LED作激励光源,其峰值波长应在0.70～0.76μm之间选择。     

Spatiotemporal and Thermal Analysis of VCSEL for Short-range Gigabit Optical Links

High-speed Optoelectronic Modules using Vertical Cavity Surface Emitting Lasers (VCSEL) coupled to Multi Mode Fibers (MMF) are a performing and low-cost solution for 10 Gigabit Ethernet (10 GbE) in short-distance optical links. A complete model of the spatiotemporal behavior of multimode VCSELs, through static and dynamic response, noise, thermal effects, and its coupling to MMF has been investigated. Relative Intensity Noise shows modal dependence and can be affected by spatial filtering due to coupling and fiber propagation. Simulations permit to evaluate critical parameters, such as modulation formats, launching conditions, and operating temperature for global bandwidth and eye diagram optimization up to 10 Gb/s. Simulation results are compared to measurements on prototype optoelectronic modules.     

Study of fiber optic sugar sensor

Over the last two decades, the fiber optic technology has passed through many analytical stages. Some commercially available fiber optic sensors, though in a small way, are being used for automation in mechanical and industrial environments. They are also used for instrumentation and controls. In the present work, an intensity-modulated intrinsic fiber optic sugar sensor is presented. This type of sensor, with slight modification, can be used for on-line determination of the concentration of sugar content in sugarcane juice in sugar industry. In the present set-up, a plastic fiber made of polymethylmethacrylate is used. A portion of the cladding (1 cm, 2 cm, 3 cm) at the mid-point along the length of the fiber is removed. This portion is immersed in sugar solution of known concentration and refractive index. At one end of the fiber an 850 nm source is used and at the other end a power meter is connected. By varying the concentration of sugar solution, the output power is noted. These studies are made due to the change in refractive index of the fluid. The device was found to be very sensitive which is free from EMI and shock hazards, stable and repeatable and they can be remotely interfaced with a computer to give on-line measurements and thus become useful for application in sugar industries.     

800nm激光泵浦掺Nd^3＋的氟化物玻璃光纤正向双程超荧光分析

从实验上探讨了掺Ｎｄ＾３＋的氟化物玻璃光纤正向双程超荧光基本特性，包括输入－输出特性、输出－带宽特性以及输出－波长（激发）特性。并给出了理论上的拟合公式，实验表明利用氟化物玻璃光纤有望获得性能优异的有应用前景的低相干度集成化光源。