Model studies of the chemisorption of hydrogen and oxygen on nickel surfaces

Atomic chemisorption of hydrogen and oxygen on the Ni(100) surface has been studied using an Effective Core Potential (ECP) approach described in a previous paper. Clusters of up to 50 nickel atoms have been used to model the surface. The computed chemisorption energies are 62 kcal/mol (exp. 63 kcal/mol) for hydrogen and 106 kcal/mol (exp. 115–130 kcal/mol) for oxygen. Correlating the adsorbate and the cluster-adsorbate bonds is extremely important for obtaining accceptable results, particularly for oxygen. Reasonable convergence of chemisorption energies is obtained with 40–50 cluster atoms for both hydrogen and oxygen. For hydrogen the addition of a third cluster layer stabilizes the results considerably. Both hydrogen and oxygen are adsorbed at (or close to) the four-fold hollow site. The calculated barriers for surface migration are also in good agreement with the experimental estimates. The calculated equilibrium heights above the surface are on the other hand too high compared with experiments. This disagreement is believed to be due to core-valence correlation effects, which are not incorporated in the present ECP. The cluster convergence for the height above the surface is much slower than for the chemisorption energy.     

Micelle formation of ethoxylated nonyl-phenols in aqueous solutions

The micelle formation of nonyl-phenols with various numbers of ethoxy groups (n _EO=10–40) was investigated in aqueous solutions and the study was focussed on the effect of temperature (293–323 K), the chain length and the inorganic electrolyte (NaCl) on the critical micelle concentration (c.m.c).The c.m.c. was determined by surface tension and interfacial tension measurements in a water/n-octane system. On the basis of the actual c.m.c. and its temperature dependence the thermodynamic functions of micelle formation (H° _m,S°_m,G°_m) were also calculated. The latter study comprised the determination of the thermodynamic function for unity ethoxy groups ((Y° _m)) as a function ofn _EO.According to the experimental results the micellar solutions are the more stable, the smaller the number of ethoxy groups in the tenside molecule and the higher the temperature as well as the electrolyte content of the system.     

A decomposition procedure for the determination of arsenic in marine samples

The use of wet and dry ashing procedures to decompose marine biological tissues and to degrade organoarsenic compounds to inorganic arsenic for analysis by zinc-column arsine generation and atomic-absorption spectrophotometry was investigated. Wet ashing with nitric, sulphuric and perchloric acids (10:2:3 v/v) released the largest percentage of arsenic from fish tissue and quantitatively degraded methylated and other organoarsenic compounds to inorganic arsenic. The arsenic concentrations found when standard reference materials were ashed with this acid mixture were in agreement with the certified values.     

Joule-Thomson inversion curve prediction by using equation of state

In this paper five equations of state are tested for checking their ability to predict the Joule-Thomson inversion curve.These five equations of state are:Mohsennia-Modarres-Mansoori(MMM),Ji-Lemp(JL),modified Soave-Redlich-Kwang(SRK)equation of state by Graboski(MSRK1),modified SRK equation of state by Peneloux and Rauzy(MSRK2),and modified Peng-Robinson (PR)equation of state by Rauzy(PRmr).The investigated equations of state give good prediction of the low-temperature branch of the inversion curve,except for MMM equation of state.The high-temperature branch and the peak of the inversion curve have been observed,in general,to be sensitive to the applied equation of state.The values of the maximum inversion temperature and maximum inversion pressure are calculated for each component used in this work.     

Structure inhomogeneities of medium-range order in fluorozirconate glasses

Images of cleaved surfaces were obtained for 53ZrF₄-20BaF₂-4LaF₃-3AlF₃-20NaF (ZBLAN) glasses and fused quartz using an NTMDT atomic force microscope. It is shown that the scatter of particle size depends on the cooling rate and is 21–48.5 Å for the cleaved surface of ZBLAN glass obtained by very fast cooling and 68–172 Å for the cleaved surface of ZBLAN after slow cooling. For cleaved fused quartz, the range is 25-18 Å.     

Chemical modification of silica surface by immobilization of functional groups for extractive concentration of metal ions

Increased utilization of mechanically stable synthetic matrices particularly silica gel as a solid support and its surface modification either by impregnation of organic ligands directly or covalent grafting through spacer unit for extractive concentration of trace elements are highlighted in the present article. Experimental evidences for existence of surface silanol and its chemical nature have explored the idea of silica surface modification. Recent methods of development in functionalized silica synthesis by attachment of various ligands or organic reagents to the silica surface and techniques of characterization of the modified surface have been reported. Analytical applications of various modified silica surfaces, in particular, adsorption of trace elements taking separation and preconcentration into account from complex synthetic mixture as well as natural water is presented.     

Alkylhydrazides and their protonated forms: Physical methods andab initio calculations

The basicity of hydrazides of the highest aliphatic carboxylic acids RC(O)NHNH₂ (R = C_nH_2n+1,n = 5-12) has been studied by potentiometric titration, and IR and¹H NMR spectroscopy.Ab initio Hartree-Fork calculations using the 6–31G^* basis set with full optimization of geometry were carried out on the simplest acy1hydrazines and their possible protonated forms. Based on these calculations, and the 1R and¹H NMR spectra, the tautomerism of alkylhydrazides and the structures of their protonated forms are discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2645–2649, November, 1996.     

Thermodynamic simulation of four-component carnallite type systems

Summary The standard method ofPitzer for predicting the solubility isotherms of systems in which solid phases with a constant composition crystallize is applied to cases when mixed crystals are formed. The four-component carnallite type systems RbCl-CsCl-MgCl₂-H₂O, RbCl-KCl-MgCl₂-H₂O, and RbCl-RbBr-MgCl₂-MgBr₂-H₂O and the corresponding subsystems are thermodynamically simulated at 25°C. It is established that the solubility diagrams consist of crystallization regions of the simple saltsMX,MX, MgX ₂·6H₂O, and MgX₂·6H₂O and of the corresponding carnallite type double salts with the composition 1:1:6. A method of calculation of the integralGibbs energy of mixingG ^mix(s) of crystals formed in water-salt systems has been proposed. The results on the systems RbCl-KCl-H₂O, RbCl-RbBr-H₂O, and MgCl₂-MgBr₂-H₂O are compared with experimental data from the literature and with values calculated using various models.

---

Thermodynamische Simulation von Vierkomponentensystemen des Carnallit-Types

Zusammenfassung DiePitzer-Methode zur Voraussage der Löslichkeitsisothermen in Mehrstoffsystemen, in welchen feste Phasen mit konstanter Zusammensetzung auskristallisieren, wurde auch für Fälle angewendet, bei denen sich Mischkristalle bilden. Die Vierstoffsysteme RbCl-CsCl-MgCl₂-H₂O, RbCl-KCl-MgCl₂-H₂O und RbCl-RbBr-MgCl₂-MgBr₂-H₂O, aus welchen Carnallit-Typ-Mischkristalle auskristallisieren, und die dazugehörigen Dreistoff-Randsysteme wurden bei 25°C simuliert. Man stellt fest, daß die Löslichkeitsdiagramme sowohl Kristallisationsbereiche der einfachen SalzeMX,M'X, MgX ₂·6H₂O und MgX ₂·6H₂O als auch der entsprechenden carnallitartigen Doppelsalze mit der Zuzammensetzung 1:1:6 umfassen. Eine Methode zur Berechnung derGibbs-EnergieG ^mix(s) für die in Wasser-Salz-Systemen gebildeten Mischkristalle wird vorgeschlagen. Die für die Systeme RbCl-KCl-H₂O, RbCl-RbBr-H₂O und MgCl₂-MgBr₂-H₂O erhaltenen Ergebnisse werden mit experimentellen Literaturdaten und Resultaten von Berechnungen aufgrund verschiedener Modelle verglichen.

     

Fourier transform infrared reflection-absorption spectroscopy of amino acids adsorbed on metal surfaces

Fourier transform infrared reflection-absorption spectroscopy (FT-IRAS) has been used to study the orientation and coordination of glycine, L-phenylalanine and L-histidine on gold and copper surfaces. It was found that glycine and L-histidine were weakly adsorbed (physisorbed) in the zwitterionic form on gold. The surface chemical bonding of L-histidine and L-phenylalanine to copper were chemical rather than physical by nature. Conclusive evidence was obtained for coordination to copper through both the amino-nitrogen and carboxylate-oxygen atoms.     

Effect of film thickness and supercooling on the performance of cholesteryl cinnamate liquid crystal capillary columns

Improved separations of the isomers of olefinic aliphatic insect pheromones were obtained on cholesteryl cinnamate glass capillary columns by operating in the supercooled temperature range of the liquid crystal. Capillary columns were prepared with varying film thickness of the stationary phase; choice of the correct film thickness ensured optimum retention for a wide range of compounds within the most effective temperature range of the liquid crystal. The deactivation procedures described made the liquid crystal columns suitable for separation of the geometric isomers of polar and nonpolar compounds.