变形测量中的数字散斑相关搜索方法

本文用仿射变换阐述了数字散斑相关方法的基本原理,通过分析散斑位移及其导数对物体变形前后散斑图的相关性的影响,对相关算法作了简化,提出了相关搜索方法.典型的实验证实了该方法的可行性,同时就散斑颗粒尺寸、子区大小对相关识别的影响等问题进行了讨论,初步给出了相关计算的有关最佳参数.     

Déformation cumulée tensorielle dans le référentiel en rotation logarithmiqueCumulated tensorial strain measure in the logarithmic rotating frame.

The time integration of strain rate tensor $\stackrel{?}{\mathit{D}}$ is a central problem in large transformations even if it is often an underlying one. The cumulated tensorial strains, obtained by the time integration of strain rate tensor $\stackrel{?}{\mathit{D}}$, allow the tackling of this problem from a geometrical point of view, and independently of material behaviour considerations. The time integration here takes place in the local objective frame defined by the logarithmic spin proposed by Lehmann et al. and Xiao et al. The numerical results obtained in a closed deformation path are presented here. The advantages and drawbacks of this novel integration for the development of behaviour laws are described. To cite this article: V. Mora et al., C. R. Mecanique 332 (2004).     

固支加筋方板在爆炸载荷作用下的刚塑性动力响应分析

采用能量法分析了固支加筋方板在爆炸载荷作用下的刚塑性动力响应。提出了该类结构在这种载荷作用下的两种变形模态和模态判别条件，导出了计及膜力影响的最大残余横向变形的计算方法及计算公式。并对两种变形模态进行了试验研究，取得了理论计算值与试验值相一致的好结果。     

界面裂纹尖端有限变形弹性场的渐近分析

采用完全非线性弹性理论，研究了一类新的可压缩超弹性材料形成的界面裂纹问题，给出了平面应变条件下裂尖场的渐近解．揭示了界面裂纹尖端场的变形特征．     

微纳米晶金属的应变率敏感性及应变硬化行为分析

基于亚微米、纳米晶粒组织塑性变形过程中多种变形机制(位错机制、扩散机制及晶界滑动机制)共存,建立了理论模型,用于定量研究亚微米、纳米晶粒组织的塑性变形行为.以铜为模型材料,计算分析了晶粒尺度、应变率以及温度对亚微米、纳米晶粒组织塑性变形行为的影响.结果表明:相比粗晶铜,亚微米晶铜表现出明显的应变率敏感性,并且应变率敏感系数随晶粒尺度及变形速率的减小而增大;同时,增大变形速率或降低变形温度都能提高材料的应变硬化能力,延缓颈缩发生,进而提高材料的延性.计算分析结果与实验报道吻合.     

Boundary Conditions for Plate Bending in One-dimensional Hexagonal Quasicrystals

For plate bending in one-dimensional (1D) hexagonal quasicrystals (QCs), the reciprocal theorem and the general solution for QCs media are applied in a novel way to obtain the appropriate stress and mixed boundary conditions accurate to all order for plates of general edge geometry and loadings. Through generalizing the method developed by Gregory and Wan, a set of necessary conditions on the edge-data for the existence of a rapidly decaying solution is established. The prescribed data must satisfy these conditions in order that they should generate a decaying state. When a set of stress edge-data or mixed edge-data is imposed on the plate edge, these decaying state conditions for the case of axisymmetric deformation of 1D hexagonal QC plates are derived explicitly. They are then used for the correct formulation of boundary conditions for the plate theory solution (or the interior solution). Furthermore, in the absence of phonon–phason fields coupling effect, corresponding necessary conditions for the case of transversely isotropic elastic plates are derived subsequently, and their isotropic elastic counterparts are also obtained.      

Brittle to Quasi-Brittle Transition

Abstract. The present study focuses on the kinetic and non-deterministic aspects of the brittle to quasi-brittle transition. A solid is approximated by a lattice formed by the interacting continuum particles and the evolution of damage is estimated using particle dynamics. The onset of transition is measured by the rate of the change of correlation length. The proposed method is illustrated on the examples of creep rupture, strain localization and dynamic expansion of a circular void in a brittle plate.Sommario. Viene posta l'attenzione sugli aspetti cinetici e non deterministici della transizione dal comportamento fragile a quello quasi-fragile. Un solido viene approssimato da un reticolo formato da particelle interagenti e l'evoluzione del danno viene stimata tramite la dinamica delle particelle. L'inizio della transizione viene misurato tramite la variazione della lunghezza di correlazione. Il metodo proposto viene illustrato su esempi di rottura per creep, localizzazione della deformazione e l'espansione di un foro circolare in una piastra fragile.     

船用惯性系统试验安装标校与变形测量

船用惯性系统试验安装标校和变形测量是提高测量精度,保证试验质量的关键技术,因此在对设备的安装误差和船体变形造成的测量误差进行分析的基础上,重点阐述惯性系统试验零位对准和变形测量的相关理论和工程技术。     

A Method for Determining the Viscoelastic Characteristics of Composites

An efficient method for determining the deformation function of a composite is discussed. The method is based on a fractional exponential representation of the deformation functions of the composite components. The viscoelastic solution is obtained using the Volterra principle. The deformation function is represented as a function of a base operator. Thus, the problem is solved by approximating the deformation function by a continued fraction and applying the method of operator continued fractions. A computational procedure is detailed and illustrated using data on longitudinal relaxation of polymethylmethacrylate. As an example, the deformation of a polymethylmethacrylate-based fibrous composite with viscoelastic properties is analyzed__________Translated from Prikladnaya Mekhanika,Vol. 41, No. 5, pp. 9–21, May 2005.     

爆炸荷载作用下多排钢管结构的大变形响应

采用八塑性铰变形模态,对爆炸荷载作用下多排钢管的压扁运动场进行了描述。基于虚速度原理,建立了多排钢管动力压扁模态解方程。由拉格朗日第二类方程确立初始条件,用差分法求解出各层钢管结构的传递荷载和压扁量大变形响应。计及应变率效应和材料硬化效应,计算值与试验结果相符。结果表明,采用模态法求解多排钢管的大变形动响应是可行的。