2,6-二甲基吡啶在Y型分子筛的Bronsted和Lewis酸中心上的吸附动力学

２，６—二甲基吡啶在Ｙ型分子筛的Ｂｒｏｎｓｔｅｄ和Ｌｅｗｉｓ酸中心上的吸附动力学董玉林，杨孔章（山东大学胶体与界面化学研究所，济南２５０１００）关键词Ｙ型分子筛，酸中心，Ｌｅｗｉｓ酸中心，２，６—二甲基吡啶，吸附动力学沸石分子筛是一类固体酸催化剂，在...     

Specific Sorption Sites for Nitrogen in Zeolites NaLSX and LiLSX

Specific sorption sites for nitrogen, N₂, in NaLSX and LiLSX zeolites were investigated using a DRIFT spectroscopic method. Sorption of molecular hydrogen, H₂, by NaLSX or LiLSX zeolite at 77 K with DRIFT control of perturbation of sorbed molecules allowed to discriminate two or three different types of specific sorption sites in the respective zeolites. Their H–H stretching frequencies are 4077 and 4081 cm^–1 for NaLSX, and 4061, 4084 and 4129 cm^–1 for LiLSX. With reference to an independent investigation by methods of both sorption thermodynamics and molecular modeling for N₂ sorption on LiLSX, the first two of the corresponding bands were ascribed to H₂ sorption on lithium cations, Li⁺, localized in supercages of the faujasite, FAU, zeolite framework at sites SIII and SIII, while the latter band most likely belongs to H₂ sorption on Li⁺ cations at sites SII, and on hydroxyl groups, OH. Sorption of N₂ by Li⁺ cations at sites SIII and SIII is the strongest, resulting in a decrease of intensity of the corresponding DRIFT bands that stem from subsequent H₂ sorption. Nitrogen sorption by Li⁺ cations at sites SII is much weaker. Sorption of N₂ on Na⁺ cations at sites SIII in NaLSX zeolite is also stronger than by Na⁺ cations at sites SII.     

活性位高度暴露的钴/氮/碳电催化剂的构建及氧还原性能研究

金属/氮/碳催化剂（M/N/C，M=Fe、Co等）是最有发展前景的非贵金属电催化剂之一，其性能依赖于催化剂表面的活性物种密度.通过常规的热解含氮前驱物与金属盐的方法制得的催化剂往往存在金属活性物种被包埋而不能有效利用的缺点.考虑到石墨相氮化碳（g-C₃N₄）富含类吡啶氮和亚纳米孔腔结构，将g-C₃N₄包覆在高导电性碳纳米笼（hCNC）表面，进而利用表层g-C₃N₄的配位和限域作用锚定大量Co²⁺离子，获得的Co/g-C₃N₄/hCNC复合物经热解后形成了活性位高度暴露、导电性好、孔结构丰富的Co/N/C催化剂.800℃热解得到的最优化催化剂在碱性介质中展现出优异氧还原活性，其起始电位（0.97 V）与商业Pt/C催化剂相当，且抗甲醇干扰性能和稳定性优异.此项研究提供了一种构建具有高度暴露活性位的M/N/C催化剂的有效策略.     

DFT Study of Metal Atoms Adsorbed at Low-coordinated Sites of MgO （001） Surface

1 INTRODUCTION The interfaces between metals and oxide play a vital role in many industrial applications: hetero- geneous catalysis, microelectronics, thermal barriers, corrosion protection, metal processing and so on[1]. In catalysis, the choice of metal and oxide support is critical in order to obtain a desired reactivity and selectivity[2]. This is due in part to the inherent reac- tivity of the two components. Also the size and shape of the metal particle, which depend on the choice…     

苯酚和草酸二甲酯在不同分子筛催化下的酯交换反应

研究了以TS－1、H－ZSM－5、Hβ和H－丝光沸石等不同分子筛为催化剂，苯酚和草酸二甲酯酯交换合成草酸二苯酯反应。通过对催化剂进行吸附吡啶的红外光谱和NH3－TPD表征，考察了不同分子筛催化剂的酸性和酸强度对草酸二苯酯合成反应的影响，确定了催化剂上的弱酸中心是催化苯酚和草酸二甲酯酯交换合成草酸二苯酯反应的活性位，且催化剂的酸性中心越多，酸量越大，催化活性越好。催化剂上的强酸中心促进了副产物苯甲醚的生成。     

Determination of acidic sites and binding toxic metal ions on cumin surface using nonideal competitive adsorption model

A fundamental study of the application of cumin biomass in the recovery of Cu and Zn metal ion uptake from food and drinks is carried out at different pH's and at fixed ionic strength. The chemical characteristics of protein in cumin seeds were investigated. Results showed that cumin contains 18.25% crude protein, which includes 18 amino acids. The main reactive groups on protein cumin are amino and carboxylic groups of dicarboxylic amino acids, leading to a pH-dependent charge. Therefore, the cumin surface is considered as a heterogeneous system. To describe protonation behavior in a heterogeneous cumin biomass (cumin/0.1 M NaNO(3)) system, acid-base titrations have been performed with conductometric and potentiometric titration. Measurement of the reactivity of cumin surface in the adsorption of Cu and Zn metal ions and determination of metal binding at different pH's were also carried out. To solve broad and ill-defined titration curves, a simplified version of nonideal competitive analysis (NICA) by Plette et al.) was applied. The results show that the sorption of the bivalent metal ions onto the whole surface of cumin could be attributed to a monodentate binding to one site mainly carboxylic-type site.     

Designing a contaminated soil sampling strategy for human health risk assessment

Human health risk assessment is a site-based approach used to identify the potential health hazards which are induced by an old site contamination. For a proper evaluation of the daily doses of contaminants to which people will be exposed given the future occupation of the site, both a characterization and a quantification of soil pollution are needed. Such information can be provided by soil sampling. Thus the choice of the location, the number, depth and type of soil samples is very important and ought to follow a well-defined strategy. A review of contaminated site sampling practices in Europe and North America could not identify any completely formalized sampling strategy for human health risk assessment. On the contrary there are several approaches which can be roughly classified into two categories: a systematic sampling scheme over the whole site, on the one hand, and a sampling design driven by an initial knowledge of the contamination sources and fitted to the suspected pollution pattern, on the other. The first approach provides a complete coverage of the site but it may be rather expensive and entail useless sampling. The performance of the second depends on the quality of prior information. Actually both methods can be combined as explained hereafter. In view of the specificity of each site, the requirements of health risk assessment and the time and cost constraints, it seems difficult to work out a typical soil sampling strategy suitable for all sites. However, some recommendations can be made according to the site dimensions, the nature, degree and heterogeneity of contamination, and the (future) use of the site. The scientist should thus rely on a thorough examination of all available information (site history, geology and hydrogeology, soil properties, contaminants behaviour , etc.) to delimit contaminated areas as homogeneous as possible and then distribute the sampling points (e.g.using a sampling grid). They should also take the potential exposure paths into account in order to define the areas and soil strata to be sampled as a priority. Statistical and geostatistical tools can be helpful for formulating a sampling strategy as well as for interpreting the collected data. Received: 7 December 2001 Accepted: 24 February 2002     

Origin and Prediction of Highly Specific Bond Cleavage Sites in the Thermal Activation of Intact Protein Ions

Predicting the fragmentation patterns of proteins would be beneficial for the reliable identification of intact proteins by mass spectrometry. However, the ability to accurately make such predictions remains elusive. An approach to predict the specific cleavage sites in whole proteins resulting from collision-induced dissociation by use of an improved electrostatic model for calculating the proton configurations of highly-charged protein ions is reported. Using ubiquitin, cytochrome c, lysozyme and β-lactoglobulin as prototypical proteins, this approach can be used to predict the fragmentation patterns of intact proteins. For sufficiently highly charged proteins, specific cleavages occur near the first low-basicity amino acid residues that are protonated with increasing charge state. Hybrid QM/QM′ (QM=quantum mechanics) and molecular dynamics (MD) simulations and energy-resolved collision-induced dissociation measurements indicated that the barrier to the specific dissociation of the protonated amide backbone bond is significantly lower than competitive charge remote fragmentation. Unlike highly charged peptides, the protons at low-basicity sites in highly charged protein ions can be confined to a limited sequence of low-basicity amino acid residues by electrostatic repulsion, which results in highly specific fragmentation near the site of protonation. This research suggests that the optimal charge states to form specific sequence ions of intact proteins in higher abundances than the use of less specific ion dissociation methods can be predicted a priori.     

“多角度欣赏面心立方晶胞”教学设计*

尝试利用“火花学院”App等在线交互资源,引导学生从立体几何及密置层堆积模型视角,观察、描述、绘制面心立方晶胞的正四面体填隙、正八面体填隙、三视图和沿体对角线投影图像,加深学生对以面心立方晶胞结构为基础的CaF₂→金刚石晶胞、NaCl→钙钛矿晶胞结构的理解;再结合新型材料透明镁铝尖晶石晶体结构的探讨,了解晶体制备中的掺杂改性等常用方法,发展学生的微观探析能力和科学创新意识。