Reverse permeation of sodium ions driven by pH difference across a liquid membrane: time dependencies of membrane resistance and membrane potential in a reverse permeation system

The diffusional flux of sodium ions across a liquid membrane was observed as a reverse permeation phenomenon: sodium ions were transported across the membrane against their own concentration difference. A supported liquid membrane having stearic acid as an ionic carrier was used. The internal aqueous phase contained NaCl and HCl and the external aqueous phase contained NaOH of the same initial concentration as NaCl in the internal aqueous phase. The reverse permeation occurred with a long time delay. During the delay, sodium ions flowed from the acidic to alkaline solution. The diffusion coefficient of sodium ion estimated from the flux equation taking into account the Donnan equilibrium at the interface was found to be much greater than that in the membrane solvent, 1-octanol. In the same membrane system as for the flux measurement, the membrane conductance and the membrane potential were measured as a function of time. The time dependence of the membrane potential in the presteady state showed a biphasic behavior. The initial rapid phase could be attributed to the change in the phase boundary potential and the subsequent slow step to the change in the diffusion potential within the membrane. Before the steady membrane potential had been reached, the reverse permeation of sodium ions against their own concentration difference was not observed. During the slow relaxation process of the membrane potential, the membrane resistance decreased to approach the steady state. Moreover, the oscillation of membrane potential abruptly started at a time in the slow step of the potential change and continued during the steady state. It was suggested that, at the presteady state, the increase in the amount of water in the membrane would drive a drastic change in the state of the liquid membrane in the filter pore, e.g. an inverted micellar structure making.     

Electrochemistry of capillary systems with narrow pores. IV. Dialysis potentials

The dialysis potentials of different collodion membranes with graded pore sizes and electrochemical activities have been measured in dilute aqueous KCl solutions as functions of concentration. It is possible to predict the value of the diffusion potential within a few millivolts on the basis of electrical conductivity data obtained with the same membranes. In general, the measured values are lower than those calculated. It is assumed that this difference is caused by the membranes having a distribution of pore sizes.     

A novel measurement method of Donnan potential at an interface between a charged membrane and mixed salt solution

We developed a novel measurement method of the Donnan potential difference at a charged membrane/salt solution interface. The method can measure the potential under the condition that the membrane charge density is much lower than the KCl concentration of the salt bridge. This method is very useful for obtaining the effective charge density of each layer of a bipolar membrane. The present experiments in a system of a negatively charged poly(vinyl alcohol) membrane and a single salt solution of KCl, NaCl, LiCl, CaCl₂ and LaC₃ revealed that the membrane effective charged density has the same value for all the ions. The experiments in mixed KCl and CaCl₂ solution revealed that the potential in the system is governed mainly by the concentration of the counterion having the highest valence in the system.     

Effect of ionic strength on the formal potential of the glass electrode in various saline media

We examined the variation with ionic strength (I, adjusted with KCl, KNO₃, KBr, NaCl or NaClO₄) of the formal potential (E_const) for glass electrodes exhibiting a Nernstian response (i.e. E_cell=E_const−s log [H⁺]). For this purpose, we investigated the different factors included in the formal potential, so we obtained reported values for the liquid junction potential as a function of ionic strength and determined the logarithm of the activity coefficient for the proton in various saline media, using Pitzer equations.     

Polyelectrolyte adsorption on charged surfaces: study by electrokinetic measurements

In order to describe the influence of cationic polyelectrolytes on flocculation of disperse systems the adsorption of poly (diallyldimethylammonium chloride) (PDADMAC) onto silica, mica and acidic polymer latex was investigated. The plateau value of the adsorption isotherms grows with increasing surface charge density of the substrates and electrolyte concentration. The adsorbed layer of the polycation was characterized by zeta potential measurements with KCl solutions of constant ionic strength and varied pH. The zero point of the charge as well as the shape of the zeta potential–pH plot depends on the coverage of the surface with polycations. For fully covered substrates the zero point of the charge as well as the pK_A and pK_B values calculated by a stochastic search programme are independent of the substrate. Maximum flocculation was observed at about 30% of the plateau value of the adsorption isotherms.     

Coupling matrix element of electron self-exchange reactions in solution

On the basis of the common feature among the electron transfer process and the ion hydration process as well as the relevant experimental kinetic data of electron transfer reaction,a new accurate hydration potential function scheme for the determination of electron transfer coupling matrix element is presented.The coupling matrix element between two hydrated ions of the reacting system in solution is calculated.The results and the applicability of this scheme are discussed.     

Study of geometrical parameters in N-H...N type of hydrogen bonds

Geometrical parameters associated with N-H ... N types of hydrogen bonds have been analysed using crystal structure data on nucleic acids, amino acids and related compounds. Histograms depicting the frequency distribution of N-H ... N length (l) and H-N ... N angle (θ) have been drawn and conclusions on the favoured geometry of such bonds have been arrived at. The distribution ofl shows a pronounced maximum in the range between 2.9? and 3.0? with an overall average of 2.98 ?. The θ distribution shows a pronounced maximum for the hydrogen bond angle in the range 0°-10°, with a rapid fall-off in frequency for nonlinear hydrogen bonds. The frequency shows a cos⁶θ dependence as compared to cos²θ dependence term used earlier to predict the angular dependence of hydrogen bond potential energy in proteins and polypeptides.     

Vergleichende Messungen des Zeta-Potentials von Faserstoffen durch Elektroosmose und Strömungsstrom/Strömungspotential

An apparatus for the determination of zetapotential is described, which allows measurement of both streaming potential and streaming current as well as electroosmosis with one and the same fiber diaphragm with various electrodes (calomel, Ag/AgCl, palladium). Measurements with glass fibers, fibers of polyacrylonitrile and of polyester, and with cellulose pulp show that identical values for the electrokinetic parameters are obtained independent of voltage applied during electroosmosis resp. pressure difference during streaming measurements. This allows the conclusion that the zetapotential in dilute electrolyte solution is here an unequivocally determinable figure.

Herrn Prof. Dr.R. C. Schulz mit den herzlichsten Glückwünschen zum 65. Geburtstag gewidmet.     

Studies in werner clathrates. Part 2. Structures of bis (isothiocyanato) tetra (4-phenylpyridine) nickel (II)· 4-dimethylsulphoxide,bis (isothiocyanato) tetra (3-methylpyridine) nickel (II)· chloroform and bis (isothiocyanato) tetra (3,5-dimethylpyridine) nickel (II)

The structures of Ni(NCS)₂(4-PhPy)₄·4DMSO and Ni(NCS)₂(3-MePy)₄·CHCl₃ have been elucidated. Movement of guest molecules through channels in the host structure was simulated by potential energy calculations. Ni(NCS)₂(3,5-diMePy)₄ does not form inclusion compounds. An intra-molecular potential energy study shows that theortho-hydrogens on the 3,5-dimethylpyridine ligands control the conformation of the molecule. The same result is obtained with the 4-methylpyridine ligand, which suggests that the extent of rotation of substituted pyridines about the Ni–N bounds is not a factor governing clathrate formation. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82030 (43 pages).     

Intrinsic field theory of chemical reactions

An intrinsic principle of least action is presented for the intrinsic dynamism of chemical reactions. Then, as the stationary trajectory, a meta-IRC (intrinsic reaction coordinate) draws a geodesic curve in a rigged Riemannian space. This establishes a geodesic law for the intrinsic dynamism. Moreover, a diagrammatic perturbation theory is formulated for the intrinsic dynamism, and a dynamical interaction between a chemically reacting system and a background system is investigated. Then, the structural stability of the system is discussed using a new concept of the dynamical potential field. An example is given in order to elucidate the present theory.Dedicated to Prof. Hermann Hartmann on the occasion of his 65th birthday.