Initiation of polymer degradation via transfer of infectious species

A novel dual stage chemiluminescence detection system incorporating individually controlled hot stages has been developed and applied to probe for material interaction effects during polymer degradation. Utilization of this system has resulted in experimental confirmation for the first time that in an oxidizing environment a degrading polymer A (in this case polypropylene, PP) is capable of infecting a different polymer B (in this case polybutadiene, HTPB) over a relatively large distance. In the presence of the infectious degrading polymer A, the thermal degradation of polymer B is observed over a significantly shorter time period. Consistent with infectious volatiles from material A initiating the degradation process in material B it was demonstrated that traces (micrograms) of a thermally sensitive peroxide in the vicinity of PP could induce degradation remotely. This observation documents cross-infectious phenomena between different polymers and has major consequences for polymer interactions, understanding fundamental degradation processes and long-term aging effects under combined material exposures.     

关于冷原子吸收法测定尿汞影响因素探讨

介绍了对尿汞快速测定法的改进，用消泡剂磷三丁酸消除尿中泡沫，并讨论了尿汞测定的最佳条件，本法的相对标准偏差为４．８－９．０％，回收率９４－１０１％。     

新的聚合物支载硼氢负离子还原剂系统研究 3: 聚合物支载还原剂III

硼氢化钠的低分子还原系统研究很多,但其聚合物支载还原剂相对来说就很少,而且仅以强碱型阴离子交换树脂来制备的聚合物试剂。为了寻找用途更广泛的、新的聚合物支载还原剂,我们进行了硼氢负离子的聚合物还原系统的研究;发现能用弱酸型阳离子交换树脂制备出新的聚合物支载还原剂。前文报道了用NaBH_4的水溶液和阴离子交换树脂     

Texture of zirconia obtained by forced hydrolysis of ZrOCl2 solutions

The structure and surface properties of ZrO₂ strongly depend on its preparation. In the present work the impact of prolonged aging at basic conditions (pH = 9, T = 100°C, t = 48 h), on the phase composition and textural properties, obtained by calcination of the precipitate, was investigated using several techniques conjointly (DTA/TG, DSC, XRD, porosimetry). The thermal effects accompanying the ZrO₂·xH₂O gel formation, the coalescence of the particles and crystallization were evaluated and discussed in terms of the structural differences between the aged and non-aged samples. This revised version was published online in July 2006 with corrections to the Cover Date.     

The effect of calcining conditions on the rehydration of dead burnt magnesium oxide using magnesium acetate as a hydrating agent

Summary Magnesium oxide was produced through calcination of magnesite ore. A rehydration percentage of MgO to Mg(OH)₂ of higher than 60% is obtained using calcination temperatures of 1000°C and below. At these temperatures medium reactive MgO was formed. The extend to which dead burnt MgO (obtained after calcination at 1200°C and higher) may be rehydrated is dependent on the calcination time, but even after 1 h and using magnesium acetate as a hydrating agent only 40% of the initial product has rehydrated to Mg(OH)₂. After 4 and more hours of calcinations at 1200°C, a maximum of approximately 14% of the initial MgO is rehydrated back to Mg(OH)₂. Thermogravimetric analysis was performed on the various compounds to determine the amounts of Mg(OH)₂ that formed.     

Metastable fluid flow described via a discrete-velocity coagulation-fragmentation model

A discrete-velocity Boltzmann model is introduced. It is based on two principles: (i) clusters of particles move in ³ with seven fixed momenta; (ii) clusters may gain or lose particles according to the rules of Becker-Döring cluster equations. The model provides a kinetic representation of evaporation and condensation. The model is used to obtain macroscopic fluid equations which are valid into the metastable fluid regime, , where is any positive number, is the inelastic Knudsen number, and _s is the saturation density.     

酰胺型萃取剂N-503的合成

酰胺型萃取剂N-503[N,N-二-(1-甲基庚基)乙酰胺]可以用甲庚醇或2-氯代辛烷为原料来合成。它的重要中间体二-(1-甲基庚基)胺的制备方法有二:一是从甲庚醇制备的方法,将甲庚醇用阮来镍催化,常压氨解,得率95～99％左右;二是从2-氯代辛烷制备,此法需要高压设备,得率35％左右。第一个方法在扩大试验中,产率和产品质量都比较好,是一个较好的制备长碳链仲胺的方法。     

药用缓释辅料——羟丙基甲基纤维素的合成及其缓释性能的研究

本文研究了药物缓释材料HPMC的合成方法,探讨了碱纤维素制备,醚化剂浓度,混合醚化剂配经以及产品后处理对高粘度HPMC的影响。本文还初步对KCl,氨茶碱,硝酸异山梨醇酯等药物采用合成的HPMC作辅料,进行了缓释制剂的研究,结果表明合成的HPMC具有满意的缓释性能。     

胺型键合反相固定相的制备及评价

首次将一种新型硅烷偶联剂--β-（3，4-环氧环已基）乙基三甲氧基硅烷（β-ECTS）与辛胺反应，然后再键合到硅胶上，得到了胺型键合固定相，并用元素分析、^13C固体核磁共振、红外光谱进行了表征。以甲醇和水为二元流动相，用包括碱性、酸性和中性有机化合物在内的混合物对该固定相进行评价，并考察了该填料的适用pH范围及水解稳定性。结果表明，该固定相具有较好的色谱性能，且在pH=2-8之间稳定性能良好，可有效地用于碱性化合物的分析分离。