三角形网格上多介质流动问题界面处理方法

多介质流动问题的求解一般是在结构网格上实现,而三角形网格对于复杂计算区域具有更好的适应性,本文结合rGFM方法,给出三角形网格上多介质流动问题界面处理方法.利用level-set方法跟踪界面,在界面处构造Riemann问题,得到界面处流体准确的流动状态.通过定义界面边界条件,将多介质流动问题转化为单介质流动问题,利用高精度RKDG方法求解.采用多个算例验证该方法的稳健性和有效性,结果表明该方法能准确捕捉界面和激波的位置,保持界面清晰.     

超燃冲压发动机等截面隔离段中流动的LBM模拟

采用耦合的双分布函数格子Boltzmann方法模拟超燃冲压发动机中隔离段的流动.计算结果反映了隔离段内流场的基本结构,表明LBM在隔离段的模拟中是-种具有潜力的数值计算方法.     

Simulation of growing GaN in vertical HVPE reactor

The paper reports the setting up of a model of fluid dynamic for GaN HVPE system and the simulation. It is found that when the direction of gravity is opposite to the direction of GaCl flow inlet,there exits a distance at which the uniformity of the deposition is optimal. Here the good uniformity of the deposition is obtained when the distance between the substrate and GaCl inlet is 5 cm. The parameters of gas flow used in growing GaN are also optimized. In addition, the influence of gravity and buoyancy on...     

核磁自旋回波串的液体分量分解快速反演法(英文)

该文叙述核磁自旋回波串的液体分量分解快速反演法.此方法假定液体,无论是在散装形式或饱和多孔介质中,可以用一个或一组核磁弛豫线形来表征.对一维核磁共振的拉普拉斯反演,它可以是预先确定的一个或一组T2或T1分布.对二维核磁共振的拉普拉斯反演,它可以是一个或一组预先确定的( D, T2)或( T1, T2)二维分布.对三维核磁共振的拉普拉斯反演,它可以是一个或一组预先设定的( D, T1, T2)三维分布.这些预先确定的线形,可以是高斯、B样条或预先由实验或经验确定的任何线形.这种方法可以显着降低核磁共振数据反演的计算时间,特别是从石油核磁共振测井采集的多维数据反演,它不需牺牲反演所得的分布的平滑性和准确性.这种方法的另一个新应用是作为一种约束求解方法来过滤相邻深度所采集的数据噪音.核磁共振测井的噪音信号,往往造成在相邻深度的同一岩性岩层有不同的T2分布.在此情况下, T2分布就不能用来识别岩性.通过非一般的矩阵操作,作者成功实现了对相邻深度的回波串实施约束求解方法,从而使得T2分布成为一种可靠的岩性识别指标.     

Viscous Fluid Cosmology in Bianchi Type-I Space-Time

The paper presents a spatially homogeneous and anisotropic Bianchi type-I cosmological model consisting of a dissipative fluid. The field equations are solved explicitly by using a law of variation for mean Hubble parameter, which is related to average scale factor and yields a constant value for deceleration parameter. We find that the constant value of deceleration parameter describes the different phases of the evolution of universe. A barotropic equation of state (p=γ ρ) together with a linear relation between shear viscosity and expansion scalar, is assumed. It is found that the viscosity plays a key role in the process of the isotropization of the universe. The presence of viscous term does not change the fundamental nature of initial singularity. The thermodynamical properties of the solutions are studied and the entropy distribution is also given explicitly.     

Vibration and instability analysis of tubular nano- and micro-beams conveying fluid using nonlocal elastic theory

A nonlocal Euler–Bernoulli elastic beam model is developed for the vibration and instability of tubular micro- and nano-beams conveying fluid using the theory of nonlocal elasticity. Based on the Newtonian method, the equation of motion is derived, in which the effect of small length scale is incorporated. With this nonlocal beam model, the natural frequencies and critical flow velocities for the case of simply supported system and for the case of cantilevered system are obtained. The effect of small length scale (i.e., the nonlocal parameter) on the properties of vibrations is discussed. It is demonstrated that the natural frequencies are generally decreased with increasing values of nonlocal parameter, both for the supported and cantilevered systems. More significantly, the effect of small length scale on the critical flow velocities is visible for fluid-conveying beams with nano-scale length; however, this effect may be neglected for micro-beams conveying fluid.     

自然对流换热的高精度非结构网格有限体积法

用非结构网格有限体积法求解自然对流换热时,传统的对流项离散格式难以兼顾数值精度与计算效率,我们发展了一种耦合高精度格式的延迟修正方法,用于对流项的离散.高Re数下方腔驱动流数值计算验证了该方法具有较高的计算精度和较好的稳定性.Boussinesq流体的自然对流换热数值模拟,表明该方法能有效克服高Ra数时数值计算发散,可准确捕捉自然对流换热问题中不同偏心率下的等温线和流线分布特征.     

Thermal Buckling Analysis of FGM Sandwich Circular Plates Under Transverse Nonuniform Temperature Field Actions北大核心CSCD

Based on the von Kármán geometric nonlinear plate theory, the displacement⁃type geometric nonlinear governing equations for FGM sandwich circular plates under transverse nonlinear temperature field actions were derived. With the immovable clamped boundary condition, the analytical formula for dimensional critical buckling temperature differences of the system was obtained from the solution of the linear eigenvalue problem. Moreover, the 2⁃point boundary value problem of ordinary differential equations was solved with the shooting method. The effects of geometric parameters, constituent material properties, gradient indexes, temperature field parameters and layer⁃thickness ratios on the critical buckling temperature differences, the thermal postbuckling equilibrium paths, and the buckling equilibrium configurations of FGM sandwich circular plates, were investigated. The results show that, with the increases of the thickness⁃radius ratio, the relative thickness of the FGM layer and the gradient index, the FGM sandwich circular plate's critical buckling temperature difference will increase monotonically. Given a fixed radius and a fixed total thickness, the postbuckling deformation of the FGM sandwich circular plate will decrease significantly with the relative thickness of the FGM layer. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

工作记忆、中央执行功能与流体智力的关系分析

探讨工作记忆、中央执行功能子成分与流体智力的关系.以秦巴山区18～40岁健康成人为研究对象,通过对中央执行功能子成分、工作记忆广度以及流体智力的测量,分析了各变量之间的关系,并进一步探讨了中央执行功能各子成分的可分离性.得到 （1）工作记忆中的中央执行功能具有可分离性;（2）工作记忆广度与瑞文测验成绩之间的显著相关是刷新功能的作用;（3）相对于抑制功能和转换功能,刷新功能对流体智力具有更强的预测效应和解释力.