15Nmethacetin test to control liver function of infants with formerly very low birth weight

Abstract

Hepatic detoxification capacities of three groups of infants aged about two were estimated using the [¹⁵N]methacetin elimination test, as well as standard serum parameters:

1. Formerly hypotrophically born infants still too small for their age (n = 23)

2. Patients suffering from severe liver diseases (n = 15)

3. Patients without liver diseases (n = 14).

17 of the infants of group 1 showed ¹⁵N elimination rates as low as the rates of the liver-diseased patients of group 2. Compared to the infants of group 3, who had normal values, the findings reflect diminished hepatic monooxygenases activities in groups 1 and 2. On the other hand, the serum parameters of the infants of group 1 did not deviate from normal values estimated in group 3. Here only group 2 showed pathological values. Consequently, the [¹⁵N]methacetin test seems to be more sensitive in controlling hepatic parameters of growth retardations than the usual serum parameters used here. Further investigations have to answer the question to which proportion intrauterine malnutrition and postnatal effects, such as environmental living conditions, contribute to the retardation of liver function development in combination with growth retardation.     

Cathode catalysts degradation mechanism from liquid electrolyte to membrane electrode assembly

Single-cell and half-cell degradation test procedures were evaluated for carbon-supported Pt/C, PtCo/C and PtNi/C catalysts. Half-cell analyses were employed to understand the effect of the number of cycles and of the scan rate over the cathode catalysts degradation under potential cycling from 0.6 to 1.2 V. The data suggested a time-dependent degradation for all three catalytic systems. Single-cell measurements were used to evaluate the impact of catalyst degradation on fuel cell performance. The measurements in both setups showed similar ECSA and ORR mass activity losses. Specific degradation mechanisms related to Pt dissolution, Pt agglomeration, and transitional metal leaching were quantified and correlated with performance losses.     

Study of the nanostructure of γ‐irradiated high‐density polyethylene/carbon black composite and its durability as geomembrane

The degradation of the nearby generation of high‐density polyethylene (HDPE) loaded with 2.5% of carbon black (CB) content (ie, HDPE/CB composites) is studied experimentally with the end goal of radiation safety applications. The impact of various γ‐irradiation doses in the air on the nanostructure of free volume and durability has been researched. The free volume was evaluated utilizing the positron annihilation lifetime (PAL) technique while the durability was contemplated by measuring the mechanical properties such as strain, elongation at break, and tear resistance. The electrical conductivity was explored to demonstrate the impact of the irradiation dose on the conductivity of the samples. Surface morphology studies using a scanning electron microscope (SEM) showed the surface fracture of HDPE/CB composites for unirradiated and irradiated samples. The surface roughness of the HDPE/CB GMs increases with increasing the irradiation dose. Among various uses of HDPE/CB composites, sheets are liners of dumps used to dispose of interim storage for Low and Medium Level Waste of NORMs and TENORMs. HDPE Geomembrane liners proved its utilization from the results of present research of electrical, mechanical tests, and SEM morphology to have the required resistance to weather conditions.     

Unlocking the Hidden Potential of Cosmetics Waste for Building Sustainable Green Pavements in the Future: A Case Study of Discarded Lipsticks

This investigation is dedicated to unlocking the hidden potential of discarded cosmetics towards building green sustainable road pavements in the future. It is particularly aiming at exploring waste lipstick (WLS) as a high-quality functional additive for advanced asphalt mix technologies. To fuel this novel innovation, the effect of various WLS doses (e.g., 5, 10, and 15 wt.%) on the performance of base AP-5 asphalt cement was studied in detail. A wide array of cutting-edge analytical lab techniques was employed to inspect in-depth the physicochemical, microstructural, thermo-morphological, and rheological properties of resultant admixtures including: elemental analysis, Fourier transform-infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thin-layer chromatography-flame ionization detection (TLC-FID), scanning electron microscopy (SEM), atomic force microscopy (AFM), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), needle penetration, ring and ball softening point, Brookfield viscometer, ductility, and dynamic shear rheometer (DSR) tests. Unlike the unstable response of asphaltenes, the additive/artificial aging treatments increased the fraction of resins the most, and decreased that of aromatics; however, asphaltenes did not impair the saturates portion, according to Iatroscan research. FT-IR scan divulged that the WLS-asphalt interaction was physical rather than chemical. XRD diagnosis not only revealed an obvious correlation between the asphaltenes content and the fresh-binder crystallinity but also revealed the presence of fillers in the WLS, which may generate outstanding technical qualities to bituminous mixes. According to AFM/SEM analyses, the stepwise incorporation of WLS grew the magnitude of the “bee-shaped” microstructures and extended the roughness rate of unaged/aged binders. The prolonged consumption of the high thermal-stable additive caused a remarkable drop in the onset degradation and glass transition temperature of mixtures, thus enhancing their workability and low-temperature performance, according to TGA/DTGA/DSC data. The DSR and empirical rheological experiments demonstrated that the WLS could effectively lower the manufacturing and compaction temperatures of asphalt mixes and impart them with valuable anti-aging/fatigue-cracking assets. In a nutshell, the use of waste lipstick as an asphalt modifier is viable and cost-effective and could attenuate the pollution arisen from the beauty sector, while improving the performance of hot/warm asphalt mixes (HAM/WAM) and extending the service life of roadways.     

Determination of 13CO2/12CO2 Ratio by IRMS and NDIRS

Abstract

Breath tests using ¹³C-labelled substrates require the measurement of ¹³CO₂/¹²CO₂ ratio in breath gas samples. Next to isotope ratio mass spectrometry (IRMS), which is very sensitive but also complex and expensive, alternatively isotope selective nondispersive infrared spectrometry (NDIRS) can be used to determine the ¹³CO₂/¹²CO₂ ratio in expired breath. In this study we compared NDIRS- with IRMS-results to investigate whether the less expensive and very simply to operate NDIRS works as reliable as IRMS. For this purpose we applicated 1-¹³C-Phenylalanine to patients with advanced liver cirrhosis and healthy volunteers and took duplicated breath samples for IRMS and NDIRS at selected time points. Our data show a good correlation between these two methods for a small number of samples as required for simple breath tests. Longer series, where repeated measurements are required on the NDIRS instrument lead to a decreasing correlation. This indicates the superiority of IRMS concerning ¹³CO₂-kinetics over longer time periods.     

Goodness-Of-Fit Tests Based on Estimated Expectations of Probability Integral Transformed Order Statistics

New goodness-of-fit tests, based on bootstrap estimated expectations of probability integral transformed order statistics, are derived for the location-scale model. The resulting test statistics are location and scale invariant, and are sensitive to discrepancies at the tails of the hypothesized distribution. The limiting null distributions of the test statistics are derived in terms of functionals of a certain Gaussian process, and the tests are shown to be consistent against a broad family of alternatives. Critical points for all sample sizes are provided for tests of normality. A simulation study shows that the proposed tests are more powerful than established tests such as Shapiro-Wilk, Cramér-von Mises and Anderson-Darling, for a wide range of alternative distributions.     

Effects of multiple blade interaction on the containment of blade fragments during a rotor failure

A finite element analysis is used to study the impact and the containment aspects of rotor blade fragments that are produced during a aircraft jet engine rotor failure. The impact and containment studies are performed on a ring-type containment structure and various fragment types are considered in this study. For each type of fragment, the ring thickness is varied incrementally and the ring response, residual kinetic energy level of the fragments, magnitude of impact forces and the overall containment or failure are determined. First, only a single fragment is considered and the rotor is assumed to contain no other blades. Next, the remaining blades are introduced and the effects of multiple collisions with the other blades on the containment are analyzed. The explicit, nonlinear finite element code Dyna3d is used for the numerical computations in this study and the results are compared with the experimental results performed on a T58 rotor at the spin facility of the Naval Air Propulsion Test Center.     

Characterization of Volatile Compounds of Rosa roxburghii Tratt by Gas Chromatography-Olfactometry,Quantitative Measurements,Odor Activity Value,and Aroma Intensity

Rosa roxburghii tratt (RRT), widely distributed in the southwest of China, is favored by consumers for its good taste and healthy functions. In this study, thirty-seven compounds of Rosa roxburghii Tratt (RRT) were identified and quantified by gas chromatography–olfactometry (G–O) and gas chromatography–mass spectrometry (GC–MS) analysis. Furthermore, ethyl 2-methylpropanoate, ethyl butanoate, ethyl 2-methylbutyrate, and ethyl hexanoate were present with much higher odor activity values (OAVs) than other compounds. The key notes were confirmed by omission tests. Possible interaction among key notes was investigated through odor intensity determination and sensory analysis. It showed fruity and woody notes had synergistic effects. Full factorial design was used to evaluate the notes contribution to the whole odor. One important finding is the major effect of order interactions, fruity note (X1) and woody note (X4) especially, emphasizing the existence of complex interactions occurring between odor notes. The interaction X1X4 was further investigated. The woody note has a positive effect when the fruity note is also in the mixture but tends to show a negative effect otherwise.     

EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.