新疆产12种中草药中微量金属元素的测定

本文测定了新疆产新疆党参,新疆元胡等１２种中草药中十种微量金属元素的含量．结果表明这些中草药中具有显著生理活性的Ｚｎ、Ｆｅ、Ｃｕ、Ｍｎ等元素．它们的含量除了个别样品外均大于或接近于国内其它地区所产的同种中草药、根据冠心病病因的Ｚｎ／Ｃｕ值假说和微量金属元素的含量关系,新疆产１２种中草药也可用于防治冠心病．     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.     

Flow-injection spectrofluorometric determination of trace amounts of formaldehyde in water after derivatization with acetoacetanilide

A novel fluorophotometric method for formaldehyde determination in environmental waters was developed: the method does not require any enrichment procedures. A flow-injection analysis method for the spectrofluorometric determination of formaldehyde in waters, which is based on the reaction of formaldehyde with acetoacetanilide and ammonia, is proposed. The proposed method shows a good linearity from 0.50 to 40 × 10⁻⁷ M, and the limit of detection (LOD) of 3 × 10⁻⁹ M (0.09 ppb) is achievable. The sample throughput is 15 h⁻¹. One of the main advantages in the proposed method is that the reaction can be carried out at room temperature without any heating system. The effect of various interferences possibly present in the real water samples was investigated. Most cations and anions, as well as organic compounds, do not interfere with the determination of formaldehyde in environmental water samples. The proposed method is very simple, rapid, less expensive, and highly sensitive, and can be applied to the environmental water samples, such as rain, tap water and river water, at low concentration levels without any enrichment procedure.     

2－（5－Br－2－吡啶偶氮－5－二乙氨基）－酚与铑的显色反应的研究及应用

本文研究了２－（－５－Ｂｒ－２吡啶偶氮－５－二乙氨基）－酚与铑（Ⅲ）的显色反应。在ｐＨ为４．０的邻苯二甲酸氢钾缓冲液介质中，Ｒｈ（Ⅲ）与试剂形成稳定的橙红色络合物，其组成比为１：４，最大吸收波长为４９０ｎｍ，表现摩尔吸光系数为１．３×１０￣５Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）。铑含量在０～４μｇ／１０ｍＬ范围内服从比尔定律。     

Use of NIRS technology with a remote reflectance fibre-optic probe for predicting major components in bee pollen

In the present work, we study the use of near infra-red spectroscopy (NIRS) technology together with a remote reflectance fibre-optic probe for determination of the major components in bee pollen. The method allows immediate control of the bee pollen without prior sample treatment or destruction through direct application of the fibre-optic probe to the sample.The regression method employed was modified partial least squares (MPLS). The calibration results obtained using 45 samples of bee pollen allowed the measurement of protein, moisture, ash, reducing sugars, and pH with multiple correlation coefficients (RSQ) and prediction corrected standard errors (SEPC) of 0.91, 0.56% for protein, of 0.78 and 0.49% for moisture; 0.92 and 0.049% for ash; 0.81 and 1.32 g of glucose/100 g of bee pollen; 0.84 and 0.15 for pH, respectively.The prediction capacity of the pattern was checked by applying it to samples of unknown pollen in external validation.     

Kinetic determination of codeine in pharmaceutical preparations

A kinetic method for the determination of codeine, based on its inhibitor action on the catalytic decomposition of hydrogen peroxide by cobalt(II), is presented. It has been found that the effect of codeine is most pronounced in the presence of 5% v/v ethylene glycol. The reaction is followed photometrically. Codeine can be determined in concentrations ranging from 0.80×10^–5 M to 2.4×10^–5 M. The method has been applied to the determination of codeine in pharmaceutical preparations.     

Kinetic spectrophotometric methods for the determination of dothiepin hydrochloride in bulk and in drug formulation

Two simple and sensitive kinetic methods for the determination of dothiepin hydrochloride are described. The first method is based on kinetic investigation of the oxidation reaction of the drug with alkaline potassium permanganate at room temperature for a fixed time of 25 min. The absorbance of the colored manganate ions is measured at 610 nm. The second method is based on the reaction of dothiepin hydrochloride with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in the presence of 0.1 mol L^–1 sodium bicarbonate. Spectrophotometric measurement was achieved by recording the absorbance at 470 nm for a fixed time of 60 min. All variables affecting the development of the color were investigated and the conditions were optimized. Plots of absorbance against concentration in both procedures were rectilinear over the ranges 4–24 and 50–250 g mL^–1, with mean recoveries 99.33±0.42 and 99.88±0.53, respectively. The proposed methods were successfully applied for the determination of dothiepin hydrochloride in bulk powder and in capsule dosage form. The results obtained were found to agree statistically with those given by the non-aqueous B.P. method. Furthermore the methods were validated according to USP guidelines and also assessed by applying the standard addition technique. The determination of dothiepin hydrochloride by the fixed concentration method is feasible with the calibration equations obtained, but the fixed time method proves to be more applicable.     

Selective spectrophotometric determination of TNT in soil and water with dicyclohexylamine extraction

Contaminated land and groundwater remediation in military waste dumping sites often necessitates the use of simple, cost-effective, and rapid tests for detecting trinitrotoluene (TNT) residues in the field along with their dinitro-analogues. A simple, rapid, low-cost, and field-adaptable (on-site) colorimetric method was developed for quantifying TNT in the presence of RDX, PETN, picric acid, 2,4-DNT (dinitrotoluene), dinitrophenol, and dinitroaniline. Most commercialized methods for TNT assay-with the exception of Cold Regions Research and Engineering Laboratory of the U.S. Army (CRREL) method-use proprietary chemicals, and the color stability and intensity are highly dependent on the composition of the organic solution comprised of acetone or methanol. The developed colorimetric method is based on the extraction of TNT from water-acetone solution into an organic solvent mixture of dicyclohexylamine (DCHA)-isobutyl methyl ketone (IBMK) (10:1, v/v), filtration through a filter paper into a stoppered optical cell containing anhydrous sodium sulfate, and measurement of the absorbance of the organic extract at 531 nm after 5 min. The red-violet color of the extract was due to intermolecular charge-transfer (CT) between the electron attracting TNT and electron-donating DCHA, and the molar absorptivity for TNT in final organic solution was (1.16 ± 0.02) × 10⁴ L mol⁻¹ cm⁻¹.The R.S.D. of the slope of calibration line was 0.7%. The LOD of the method in the final organic phase was 0.38 μM TNT, and LOD values expressed on the basis of original soil TNT content were 0.5, 1.3, and 1.5 ppm (μg g⁻¹) for clay, loamy clay, and sandy soils, respectively. Unlike other spectrophotometric methods, the developed assay was basically tolerant to common cations and anions found in soil and water at 100-fold weight ratios, and to soil humic acids. Among a number of compounds that may be encountered in polynitro-explosive storage and waste reclaimation sites such as picric acid, dinitrophenol, 2,4-dinitrotoluene, dinitroaniline, RDX, PETN, and tetryl, only tetryl interfered with the developed TNT assay. Water tolerance and exploitability over a wide pH range were other superiorities over the CRREL method. The CT-complex was relatively stable, as the absorbance of the organic extract was not significantly influenced from the dilution of the water-acetone phase. Aside from the extractive-photometric procedure established for aqueous solutions, a simulated field colorimetric assay for TNT directly applicable to soil was also devised, based on direct color development in a 4:1 (v/v) acetone-dicyclohexylamine organic extract of soil at a liquid-to-solid ratio of 5 mL g⁻¹.     

Spectrophotometric determination of Fe(II) in milligram solid samples

The analytical procedure of determination of Fe(II) in the presence of Fe(III) in milligram samples is proposed. A solid sample is dissolved in hydrochloric acid in argon atmosphere. Subsequently, the pH-value of the solution is fixed and Fe(III) complexed by phosphoric buffer. At the next step Fe(II) is oxidized by -molybdosilicic acid. Finally, the intensity of colouring caused by the reduced form of the acid is measured at the wavelength 770 nm. The proper treatment of the sample during oxidation, and immediately before, is decisive for the accuracy of the analysis. The method was verified by means of the analysis of synthetic magnetite. The theoretical content of Fe(II) was 24.12%, the determined one was 24.02 ± 0.10%. The method was applied to the determination of the homogeneity of an iron catalyst for ammonia synthesis.