Surface morphologic and structural analysis of IR irradiated silver

The microstructural morphological changes in laser irradiated targets are investigated. Nd:YAG laser (1064 nm, ∼12 ns nominal, 1.1 MW) is used to irradiate 4 N pure (99.99%) fine polished and annealed silver samples in ambient air and under vacuum ∼10⁻⁶ Torr. The laser spot size and power density at tight focus are 12 μm and 3×10¹¹ W/cm², respectively. SEM micrographs and X-ray diffractograms of the exposed and unexposed targets reveal the surface texture and structural changes, respectively. Amongst the ablation mechanisms involved, exfoliation and hydrodynamic sputtering are found to be dominant. Surface modifications appear in the form of craters and ripples formation. Heat is conducted non-uniformly through narrow channels at the surface. Thermal stresses induced by the laser do not disturb inter planar distance of the target. On the other hand irradiation causes significant variations in grain size and diffracted X-rays intensities.     

Quantitative analysis of cement powder by laser induced breakdown spectroscopy

Determination of elemental composition of cement powder plays an important role in the cement and construction industries. In the present paper, Laser induced breakdown spectroscopy (LIBS) is used for measuring the concentration of cement ingredient. Cement powder samples are pressed into pellets. Laser pulses are focused on the surface of pellets. A microplasma is formed in the front of samples. The plasma emission contains information about the elemental composition of the samples. By assumption of local thermodynamic equilibrium (LTE) and using several standard cement samples, a calibration curve is prepared for each element. The major and minor elements of cement such as Ca, Si, K, Mg, Al, Na, Ti, Mn and Sr are qualitatively and quantitatively determined. For verification of LTE conditions, plasma parameters such as plasma electron temperature and electron density are computed. According to the obtained results, the LIBS technique could be a suitable method for determination of elemental composition in the cement production industries.     

基于独立成分分析的高光谱图像异常检测

针对高光谱图像中背景及目标先验知识未知条件下的异常目标检测问题,提出了一种基于独立成分分析(ICA)的异常探测算法.首先估计原始数据的虚拟维(VD)以确定要分离的独立成分个数,在此基础上进行快速独立成分分析(FastICA),然后基于平均局部奇异度选择含异常信息较多的独立成分,最后使用丰度量化算法得到异常目标的丰度图像...     

水中镉含量的激光诱导击穿光谱高灵敏快速检测

 为了对水中的痕量镉进行高灵敏快速检测,实验采用一种未受污染的薄木片作为基底来吸收水样品,将其晾干后再用激光诱导击穿光谱（LIBS）技术对其进行分析,克服了用LIBS技术直接分析水样品时灵敏度低和稳定性差等问题。实验中选择214.44 nm的镉离子线作为分析线以提高光谱检测的灵敏度,建立了用于定量分析的校正曲线,镉的检出限达到55 μg/L,重复测量的信号相对标准偏差小于5%,单次测量的时间短于5 min。     

某光电雷达稳定平台关键部件转板的动态特性分析

 转板是光电雷达稳定平台的关键元件之一。为了更好地设计和分析某光电雷达稳定平台的转板,运用Pro E软件对其进行三维实体建模,合理简化后,进入Ansys软件界面建立有限元模型。应用有限元理论和Ansys软件对其进行动态特性分析,得到了转板前八阶模态的固有频率和振型,以及要求范围内的谐响应。对比了不同方法划分网格的网格质量,采取不同材料得到了不同模态。分析结果表明：设计的转板在关心的频段0~50 Hz,2 000 Hz~8 000 Hz内不发生共振,符合设计要求。     

Laryngostroboscopic Evaluation After Supracricoid Partial Laryngectomy

BACKGROUND: Supracricoid partial laryngectomy (SCPL) results in laryngeal preservation in more than 95% of patients with T2 glottic carcinoma. Postsurgical glottic function is characterized by an absence of vocal cords, and phonation quality is a key post-SCPL quality-of-life factor. OBJECTIVE: This investigation was designed to enhance post-SCPL vocal function, study anatomic function of the post-SCPL larynx, and correlate anatomic findings with perceptual and instrumented measurements of voice. METHOD: Twenty-five patients were included. All had undergone SCPL with cricoepiglottopexy for T2 glottic carcinoma. All patients were evaluated by laryngostroboscopic examination, voice sample recording, and instrumented voice analysis with the aim of gaining further insight into postoperative larynx function. Laryngostroboscopic parameters such as laryngeal occlusion, epiglottic length, arytenoid movement, and vibratory area were assessed. The perceptual evaluation was based on the GRBAS scale. Acoustic and aerodynamic parameters were recorded, including fundamental frequency (F0), intensity, jitter, shimmer, signal-to-noise ratio (SNR), oral airflow (OAF), maximum phonation time (MPT), and estimated subglottic pressure (ESGP). Nonparametric tests were used to compare laryngostroboscopic parameters with instrumented measurements and perceptual evaluations of voice quality. RESULTS: Correlations were established among occlusion, epiglottic length, and general grade of dysphonia. Oral air flow (P = 0.006) was found to be correlated with occlusion. Voice roughness was correlated with the presence of a clearly identifiable vibratory area (P = 0.003), whereas these vibratory areas were correlated with shimmer (P = 0.041), OAF (P = 0.001), and SNR (P = 0.001). The number of preserved arytenoids was not identified as a voice quality factor (P = 0.423). CONCLUSION: This study highlighted correlations between the laryngostroboscopic examination results and the perceptive and instrumented measurements of voice. Glottis occlusion and epiglottis length were found to be key factors for postoperative voice quality. These results should help to advance technical development on surgical techniques to enhance voice results.     

掺铥PLZT透明光电陶瓷的光辐射特性

根据J-O理论研究掺Tm3+的光电陶瓷PLZT的激光潜能，利用Tm3+的420?2000 nm的吸收光谱拟合出了其强度参量，即?2=9.133￡10-21 cm2, ?4=1.529￡10-21 cm2和?6=1.712￡10-21 cm2，进而由强度参量计算了辐射跃迁几率、辐射寿命、荧光分支比和1865 nm荧光峰的受激发射截面等光学参数．