Crystal structures of the organic metals (ET)2[Hg(SCN)Cl2] and (ET)2[Hg(SCN)2Br]

The compositions and structures of two new organic metals based on ET [where ET = bis(ethylenedithio)tetrathiafulvalene], viz., (ET)₂[Hg(SCN)Cl₂], with a metal-dielectric transition temperature (T_m-d) of 35°K, and (ET)₂[Hg(SCN)₂Br], with T_m-d = 140°K, were established by x-ray diffraction analysis. The crystal structures of the investigated compounds are similar to the structure of the previously studied organic metal (ET)₂[Hg(SCN)₂Cl] with T_m-d = 50°K. The principal crystallographic data for (ET)₂[Hg(SCN)Cl₂] are as follows: a = 36.64(1), b = 8.300(4), c = 11.798(1) Å, = 89.91(3)°, V = 3588.1(9) ų, space group Cc, Z = 4, d_calc = 2.05 g/cm³. The principal crystallographic data for (ET)₂[Hg(SCN)₂Br] are as follows: a = 37.088(14), b = 8.338(3), c = 11.738(5) Å, = 89.71(3)°, V = 3629.6(8) ų, space group C2/c, Z = 8, d_calc = 2.15 g/cm³. A characteristic feature of the crystal structure of the investigated compounds is alternation of the anion and cation layers along the a axis of the crystal. In the cation layer of the k type the ET are interconnected by shortened S...S intermolecular contacts (3.39–3.58 Å). The [Hg(SCN)_3–nX_n]^– anions (X = Cl, Br; n = 1, 2) form polymeric chains with one or two bridged SCN groups. A tendency for a decrease in the metal-dielectric transition temperature with a decrease in the volume of the anion is detected in the (ET)₂[Hg(SCN)_3–nX_n] salts, where X = Cl and Br, and n = 1 and 2.Institute of Chemical Physics, Russian Academy of Sciences, 142432 Chernogolovka. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 10, pp. 2323–2331, October, 1992.     

Synthesis of bis(cyclopentadienyl)diazadiene complexes of ytterbium. An X-ray structural study of the Cp2Yb(μ-η2:Ti2-But-N=CH-CH=N-But)Li(DME) complex

Ytterbium complexes, Cp₂Yb(-₂:²-DAB)Li(DME) (1) and CpYb(DAB)K(THF)₂ (2), containing a bridging diazadiene ligand were prepared by the reaction of CpYbCl₂(THF)₃ with (DAB)Li₂ (11) and (DAB)^–K⁺ (12) (DAB = Bu^t-N=CH-CH=N-Bu^t). The structure of complex1 was established by X-ray diffraction analysis. The complex is binuclear: the Yb atom of the Cp₂Yb fragment and the Li atom, which is bonded as well with the chelating DME molecule, are linked by the DAB ligand.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 148–151, January, 1994.     

Characteristics of immunosorbents used as a new approach to selective solid-phase extraction in environmental analysis

Summary The trace-level determination of organic pollutants in complex matrices is difficult and often not reliable because theccurrent extraction procedures are non-selective. New extraction sorbents involving antigen-antibody interactions, called immunosorbents (ISs), have been synthesised in order to trap a group of structurally related pollutants. The IS capacity is always high for the analyte-antigen used to make the antibodies, but can be low for some related compounds. In this work, we show the relationship that exists between capacity, break-through volume and recovery of analytes because of the competition between the structurally related compounds for antibody sites. Breakthrough due to the overloading of the column should be avoided because calibration curves are no longer linear. The capacity of two ISs, one made for trapping the triazine pesticide group and the second for the phenylurea, group, have been optimised by selecting silica with 50 nm pore size. Calibration curves are linear for all the compounds in a mixture of ten phenylureas up to a concentration of 5 to 10 μg L⁻¹ for each compound when handling 50 mL water samples through a precolumn packed with 0.22 g of IS. Under these conditions, reliable quantitative results are obtained because calibration curves are similar when compounds are alone or in a mixture. Application to the clean-up of soil extracts illustrates the high selectivity and the high potential of these new sorbents in environmental analysis. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Stripping voltammetry of copper and lead using gold electrodes modified with self-assembled monolayers

One problem associated with using bare solid metal electrodes, such as gold and platinum, in stripping analysis to determine heavy metal ions such as lead and copper ions in dilute solutions is that underpotential deposition (UPD) gives multiple stripping peaks in the analysis of mixtures. These peaks are often overlapped and cannot be conveniently used for analytical purposes. Bifunctional alkylthiols, such as 3-mercaptopropionic acid, with an ionizable group on the other terminal end of the thiol can form self-assembled monolayers (SAMs) on the surface of the gold electrode. It is shown that such an SAM-modified gold electrode minimizes the UPD effects for the stripping analysis of lead and copper. The anodic peak potential shifts and the peak shape changes, indicating that the SAM changes the deposition and stripping steps of these heavy metal ions. Thus, the sensitivity levels for both single species and mixtures can be significantly improved for the conventional solid electrodes. The mechanism of the deposition reaction at the SAM-modified gold electrodes is discussed. Received: 29 May 1997 / Accepted: 24 June 1997     

Analysis of organic pollutants in water at trace levels using fully automated solid-phase extraction coupled to high-performance liquid chromatography

Summary A method has been developed for the determination of trace levels of 32 pesticides, 19 explosives and 16 polycyclic aromatic hydrocarbons (PAH) in water in three individual steps. Solid-phase enrichment (SPE) is coupled to high-performance liquid chromatography (HPLC) with a fully automated system. The organic pollutants are enriched on reusable cartridges packed with adsorbent materials: pesticides and explosives on a mixed bed of divinylbenzene-ethylvinylbenzene copolymers (LiChrolut EN^?) and perfluorinated polyethylene (PolyF^?), and polycyclic aromatic hydrocarbons on C₁₈-modified silica (Zorbax^? ODS1). Thermally assisted desorption (TAD) has been shown to increase the recovery of analytes significantly. As all enriched analytes are transferred to the detector, only fifty millilitres of sample is needed for each single on-line analysis, compared with at least a litre for conventional methods. The separation of the enriched organic analytes is performed on specialized HPLC columns based on reversed-phase materials. The limits of detection of the system employed were found to be below 100 ng L⁻¹. Use of fluorescence detection for the polycyclic aromatic hydrocarbons resulted in limits of detection in the upper pg L⁻¹ range. Thek values, number of theoretical plates, the recovery rates and the limits of detection of this method for fast screening of organic pollutants from three fifty-millilitre aqueous samples are described. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996     

Thermal behaviour of benzenesulfenamides and of their chromium carbonyl complexes

Benzenesulfenamides with the formula R-S-N-(R)₂ (R=C₆H₅ andR=NC₄H₈O, C₇H₇ and C₆H₁₁) and their chromium carbonyl complexes were studied by means of TG and mass spectrometric methods. The thermal behaviour of the compounds the stabilities of free sulfenamides are lower than those observed for the corresponding chromium carbonyl complexes. Combined thermogravimetry — mass spectrometry results suggest that the fragmentation mechanism of the carbonyl complexes involves cleavage of the Cr-S and Cr-CO bonds while that of sulfenamide depends mainly on the dissociation rates of the NR₂ groups.This work was partially supported by the Departamento técnico de Investigation of the Universidad de Chile, Grant Q3280/9324.     

Water-rich molybdotellurates: Preparation and crystal structure of Li6[TeMo6O24] · 18 H2O and Li6[TeMo6O24] · Te(OH)6 · 18 H2O

Li₆[TeMo₆O₂₄] · 18 H₂O is triclinic (space group P1 , a = 1 041.7(1), b = 1 058.6(1), c = 1 070.8(1) pm, α = 61.08(1), β = 60.44(1), γ = 73.95(1)°). Single crystal X-ray structure analysis (Z = 1, 295 K, 317 parameters, 3 973 reflections, R_g = 0.0250) revealed an infinite branched chain of edge-sharing Li coordination polyhedra to be the prominent structural feature. One of the four crystallographically independent Li⁺ is coordinated octahedrally. The coordination polyhedra of the remaining Li⁺ are distorted trigonal bipyramids. Only three unique oxygen atoms (O(9), O(10), O(12)) of the centrosymmetric [TeMo₆O₂₄]^6? anion are bound to Li⁺. The further positions in the coordination spheres of the Li⁺ are occupied by water molecules. Intermolecular hydrogen bonds involve mainly oxygen atoms of the [TeMo₆O₂₄]^6? anion as nearly equivalent proton acceptors without regard to their different bonding modes to Te and Mo, respectively. Li₆[TeMo₆O₂₄] · Te(OH)₆ · 18 H₂O crystallizes monoclinically in space group P2₁/n with Z = 4, a = 994.1(3), b = 2 344.8(10), c = 1 764.9(4) pm, and β = 91.36(4)°. Single crystal structure analysis with least squares refinement of 627 parameters (5 900 reflections, 295 K) converged to R_g = 0.0324. There are six unique Li⁺ cations. The coordination polyhedra of Li(1), Li(2), Li(3), and Li(4) are linked by common edges to yield an eight membered centrosymmetric strand. The coordination polyhedra of the remaining two Li⁺ sites (Li(5), Li(6)) are connected to a dimeric unit via a common corner. All oxygen atoms of the Te(OH)₆ molecule are involved in the coordination of Li⁺. However, only three oxygen atoms (O(13), O(18), O(23)) of the [TeMo₆O₂₄]^6? anion which lacks crystallographic symmetry are involved in the coordination of Li⁺. The oxygen atoms of the anion act as proton acceptors in hydrogen bonds of predominantly medium strength. Te(OH)₆ molecules and [TeMo₆O₂₄]^6? anions connected by strong hydrogen bonds form an infinite chain.     

Improved method for the determination of sulfur components in natural gas

Determination of trace concentrations of sulfur components in natural gas is a true analytical challenge. Only analytical procedures based on gas chromatography can meet the sensitivity and accuracy requirements dictated by environmental regulation institutions and modern chemical industry. In the present contribution the sample pretreatment and chromatographic separation steps have been evaluated and optimized based on the use of a flamebased sulfur chemiluminescence detector (SCD) for target compound detection. The proposed instrument consists of a programmed temperature vaporizing (PTV) injector employing a liner packed with Chromosorb 104, a 4 μm thick film apolar column and a flame-based SCD. Using a 13 mL sample loop the detection limit achievable with the new method is 3 μg S/m³. The precision of replicate measure. ments is generally in the range of 5–15% relative standard deviation. Lower detection limits can be achieved by preconcentrating larger sample volumes, e.g. 100 mL.     

NMR J-based analysis of nitrogen-containing moieties and application to dysithiazolamide, a new polychlorinated dipeptide from Dysidea sp.

The methodology of J-based analysis applied to 1,3-methylcarboamido systems allowed us to deduce the relative configurations of the two leucine-like fragments of a new tetrachloro amino acid derivative dysithiazolamide, which was isolated from an unidentified sponge of the genus Dysidea. Furthermore, the absolute configuration was also proposed by comparison with analogous systems.     

Crystal structure of copper(II) bis-hexafluoroacetylacetonate

An X-ray diffraction investigation has performed for copper(II) bis-hexafluoroacetylacetonate (Bruker AXS P4 automatic diffractometer, MoK radiation, t = –25°C). Crystal data for C₁₀H₂CuF₁₂O₄: a = 5.530(1) Å, b = 6.038(1) Å, c = 11.266(2) Å, = 95.948(3)°, = 101.743(3)°, = 92.298(3)°, space group; P1, V = 365.6(1) ų, Z = 1, d _calc = 2.169 g/cm³. The square-planar environment of the copper atom (Cu-O_av 1.912 Å, O-Cu-O_av 93°) is completed to bipyramidal by two fluorine atoms of the neighboring molecules, Cu...F 2.71 Å and 2.75 Å.Original Russian Text Copyright © 2004 by S. A. Gromilov, I. A. Baidina, P. A. Stabnikov, and G. V. RomanenkoTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 3, pp. 502–507, May–June 2004.