催化动力学光度法测定痕量铁

论文研究和建立了催化动力学褪色光度法测定痕量Fe(Ⅲ)的新体系,反应介质为盐酸-邻苯二甲酸氢钾(pH2.2)缓冲溶液,催化体系为痕量Fe(Ⅲ)催化过硫酸铵氧化邻甲氧基酚的自聚反应。研究了此反应体系的最佳条件、动力学参数及反应机理,考察了21种干扰离子的影响,建立了一种新型催化动力学光度法测定痕量Fe(Ⅲ)的方法。本法的线性范围0.07～1.1μg·(25mL)~(-1)。方法灵敏度远远高于普通光度法,检出限为5.4×10~(-8)g·L~(-1)。方法应用于自来水、河水、城市污水、豆奶粉和茶叶中痕量Fe(Ⅲ)的测定,相对标准偏差为0.36％～3.4％,标准加入回收率为97.3％～102.7％,结果满意。     

Acoustic characteristics of rough voice: Subharmonics

This study investigates the relationship between rough voice and the presence of Subharmonics, which correspond to smaller yet distinct peaks located between two consecutive harmonic peaks in the power spectrum. Spectrum analysis was undertaken in 389 pathologic voices, of which 20 had subharmonics. Although all 20 voices had roughness perceptually, 8 had normal jitter and/or shimmer. The degree of roughness had a significant inverse relationship with the frequency of subharmonics. By digital signal processing, sound samples with various types of subharmonics were synthesized and perceptually analyzed. Power and frequency of subharmonics in the synthesized sound also had significant relationships with the degree of roughness. Rough voice is acoustically characterized not only by jitter and shimmer but also by the presence of subharmonics in the power spectrum. Subharmonics are important acoustic properties for objective evaluation of rough voices.     

Auger electron spectroscopy investigation of sputter induced altered layers in SiC by low energy sputter depth profiling and factor analysis

The thickness of the altered layer created by ion bombardment of the 6H–SiC single crystal was determined by means of Auger electron spectroscopy (AES) depth profiling in conjunction with factor analysis. After pre-bombardment of the surface by argon ions with energies 1, 2 and 4 keV until the steady state, the depth profiles of the induced altered layers were recorded by sputtering with low energy argon ions of 300 eV. Since the position and shape of the carbon Auger peak depend on the perfection of the crystalline structure, they were used for depth profile evaluation by factor analysis. In this way the depth profiles of the damaged surface region could be estimated in dependence on the ion energy. As a result, the thickness of the altered layer of SiC bombarded with 1, 2 and 4 keV Ar ions using an incident angle of 80° as well as the corresponding argon implantation profile could be measured.     

Coupled channel description of O+Nd scattering around the Coulomb barrier using a complex microscopic potential

Angular distributions of elastic scattering and inelastic scattering from 2⁺₁ state are measured for ¹⁶O+^142,144,146Nd systems at several energies in the vicinity of the Coulomb barrier. The angular distributions are systematically analyzed in coupled channel framework. Renormalized double folded real optical and coupling potentials with DDM3Y interaction have been used in the calculation. Relevant nuclear densities needed to generate the potentials are derived from shell model wavefunctions. A truncated shell model calculation has been performed and the calculated energy levels are compared with the experimental ones. To simulate the absorption, a ‘hybrid’ approach is adopted. The contribution to the imaginary potential of couplings to the inelastic channels, other than the 2⁺₁ target excitation channel, is calculated in the Feshbach formalism. This calculated imaginary potential along with a short ranged volume Woods–Saxon potential to simulate the absorption in fusion channel reproduces the angular distributions for ¹⁶O+¹⁴⁶Nd quite well. But for ¹⁶O+^142,144Nd systems additional surface absorption is found to be necessary to fit the angular distribution data. The variations of this additional absorption term with incident energy and the mass of the target are explored.     

Time saving fluid dynamic predictions in a wetting-drying process: A hypothesis for vertisols

This paper is aimed at investigating the effect of the initial water content in a vertisol sample on the whole wetting-drying process leading the system to a change in volume. In order to do this, an experimental setup was realized and employed with very thin soil layers wetted from below (“per ascensum”). The results show that the effect of the initial water content on the swelling-shrinkage process is to shift the corresponding curve e-ϑ towards bigger-smaller values of the humidity but does not seem to affect the dynamics of the process. The text was submitted by the authors in English.     

Effect of fluorine in Li1.27Cr0.2Mn0.53O2 cathode for secondary lithium batteries

Fluorine substituted Li_1.27Cr_0.2Mn_0.53O₂ electrode, prepared by sol–gel method, was investigated in the present work. Thermal analysis was done on this cathode material and found to be thermally stable with a loss of weight near 300 °C. Influence of fluorine substitution on the structural and electrochemical properties of the Li_1.27Cr_0.2Mn_0.53O₂ electrode was studied by X-ray diffraction (XRD) and field emission scanning electron microscope. XRD pattern of the fluorine-doped Li_1.27Cr_0.2Mn_0.53O₂ cathode material quenched at 900 °C indicates a phase pure material. The charge–discharge profile of the prepared cathode material showed that the fluorine substitution for oxygen in the cathode material resulted in improved capacity retention. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.     

Pixel-by-pixel analysis of DCE MRI curve patterns and an illustration of its application to the imaging of the musculoskeletal system

Dynamic contrast enhanced (DCE) MRI is a widespread method that has found broad application in the imaging of the musculoskeletal (MSK) system. A common way of analyzing DCE MRI images is to look at the shape of the time-intensity curve (TIC) in pixels selected after drawing an ROI in a highly enhanced area. Although often applied to a number of MSK affections, shape analysis has so far not led to a unanimous correlation between these TIC patterns and pathology. We hypothesize that this might be a result of the subjective ROI approach. To overcome the shortcomings of the ROI approach (sampling error and interuser variability, among others), we created a method for a fast and simple classification of DCE MRI where time-curve enhancement shapes are classified pixel by pixel according to their shape. The result of the analysis is rendered in multislice, 2D color-coded images. With this approach, we show not only that differences on a short distance range of the TIC patterns are significant and cannot be appreciated with a conventional ROI analysis but also that the information that shape maps and conventional standard DCE MRI parameter maps convey are substantially different.     

多分辨力分析在自动聚焦算法抗噪声性能中的应用

自动聚焦是数码设备、计算机视觉中的一项关键技术。自动聚焦过程中,聚焦的准确性和抗噪声性能至关重要。以高频分量作为度量的聚集评价函数具有灵敏性高、聚焦准确的优点,适用于实时系统,但是对噪声十分敏感,受噪声污染时可能导致聚焦失败。因此,提出了一种具有噪声稳健性的高频分量自动聚焦评价函数。该函数通过小波多分辨力分析提取高频分量,利用了信号的每个子带的小波系数存在一定相关性,而噪声不存在这样的相关性的特点,设定高频子带阈值,认为低于阈值的系数是噪声的贡献,大致分离图像信号与噪声信号,从而将其滤除。经过大量的实验,证明提出的方法具有单峰性好、灵敏度高等优点,特别是在抗噪声性能方面有很大提高。     

压缩空气蓄能电站综合效益评价研究

压缩空气蓄能(CAES)电站是一种新型电能存储系统,具有动态响应快、经济性能高、环境污染小等优点,可起到负荷平衡、战略规划、提高供电质量的作用.其经济效益的来源可分为两部分,静态效益和动态效益.本文将通过容量效益、能量转换效益、环保效益和动态效益等进行综合性量化评价研究.