Monte Carlo simulation of phase separation and clustering in the ABV model

As a model for a binary alloy undergoing an unmixing phase transition, we consider a square lattice where each site can be either taken by an A atom, a B atom, or a vacancy (V), and there exists a repulsive interaction between AB nearest neighbor pairs. Starting from a random initial configuration, unmixing proceeds via random jumps of A atoms or B atoms to nearest neighbor vacant sites. In the absence of any interaction, these jumps occur at jump rates _A and _B, respectively. For a small concentration of vacancies (c _v=0.04) the dynamics of the structure factorS(k,t) and its first two momentsk ₁(t),k ₂ ² (t) is studied during the early stages of phase separation, for several choices of concentrationc _B of B atoms. Forc _B=0.18 also the time evolution of the cluster size distribution is studied. Apart from very early times, the mean cluster sizel(t) as well as the moments of the structure function depend on timet and the ratio of the jump rates (= _B/ _A) only via a scaled timet/(). Qualitatively, the behavior is very similar to the direct exchange model containing no vacancies. Consequences for phase separation of real alloys are briefly discussed.     

Fractionation and purification of antioxidant peptides from Chinese sturgeon (Acipenser sinensis) protein hydrolysates prepared using papain and alcalase 2.4L

Protein hydrolysates have the potential to be natural and safer sources of bioactive peptides. In this study, two proteases were used to hydrolyze Chinese sturgeon (Acipenser sinensis) protein, and the hydrolysates were then purified to yield antioxidant peptides. The degree of hydrolysis of 23.56 % and 18.14 % was obtained using papain and alcalase 2.4L, respectivly, and hydrolysates had 96.80 % and 87.24 % total amino acid content, respectivly. The papain hydrolysate (PH) and alcalase 2.4L hydrolysate (AH) showed good antioxidant activity against DPPH^? (IC₅₀ of 3.64 and 3.15 mg/mL) and ABTS^?+ (IC₅₀ of 1.92 and 1.58 mg/mL), respectively. The low-molecular-weight (<1000 Da) fraction of both hydrolysates demonstrated the highest antiradical activity (IC₅₀ of 2.59 and 2.31 mg/mL, DPPH) and (IC₅₀ of 1.54 and 1.36 mg/mL, ABTS), respectively. Nine peptides were separated from both hydrolysates using reverse phase high performance liquid chromatography (RP-HPLC). The IC₅₀ for ABTS^?+ scavenging activity of peptide P5 with valine, glycine and asparagine (MW of 282.13 Da) from PH, and peptide P3 with histidine, glycine and alanine (MW of 302.74 Da) from AH was 0.89 and 0.72 mg/mL, respectively. The fractions and purified peptides obtained from Chinese sturgeon hydrolysates could be utilized as natural antioxidant substitutes in pharmaceuticals and food products.     

Molecular entity vacancy model

A novel molecular entity vacancy model was proposed to describe thermodynamic properties in a multicomponent solution system using its binary interaction parameters only. A derivation of the model for its general expression has been shown in detail. Under some special conditions, this model may be reduced to Flory–Huggins equation, Wilson equation and non-random two liquids (NRTL) equation as well as molecular interaction volume model (MIVM), respectively, and can be verified by Gibbs–Duhem equation, and can express thermodynamic properties of partially miscible systems. The predicted activities are in good agreement with experimental data of some liquid alloys. The results show that the model is of better predictability and reliability because it has a certain physical basis.     

π-facial interactions between Cl and [S4N3]. X-ray crystal structure of [S4N3]Cl

The X-ray structure of [S₄N₃]Cl reveals three independent molecules, which all display π-facial interactions between the Cl⁻ and the pseudo-aromatic [S₄N₃]⁺ rings to produce a structure containing “inverse sandwich” systems.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.     

Establishment of traceability of ammonium nitrogen determination in wastewater

A case study is presented for the establishment of traceability for ammonium nitrogen determination in wastewater in a routine laboratory in order to fulfil the requirements of ISO/IEC standard 17025. The necessary relevant information was obtained from the method validation data, the quality control data and equipment calibration certificates. The method of measurement is described together with the measurement equation, selected traceable reference standards and the associated measurement uncertainty. The major sources of uncertainty of the result of measurement were identified and the combined uncertainty was calculated. Identification of the main uncertainty sources represents the basis for target operations for reducing the measurement uncertainty of this determination.     

Solubility of Solid 2-Methyl-1,3-butadiene (Isoprene) in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubility of solid 2-methyl-1,3-butadiene (isoprene) in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K has been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in the solute. The experimental value of the mole fraction solubility of solid isoprene in liquid argon at 87.3 K is (1.41 ± 0.27) × 10^–6 and (1.56 ± 0.36) × 10^–7 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbon in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for isoprene than is liquid nitrogen. The experimental values of the solubilities of isoprene in liquid argon and nitrogen were compared with results obtained for selected unsaturated and aromatic hydrocarbons.     

Solubility of Solid 2,3-Dimethylbutane and Cyclopentane in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 2,3-dimethylbutane and cyclopentene in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in solutes. The experimental value of the mole fraction solubility of solid 2,3-dimethyl-butane in liquid argon at 87.3 K is (8.26 ± 1.60) × 10^–6 and (2.77 ± 0.94) × 10^–8 in liquid nitrogen at 77.4 K. The experimental value of the mole fraction solubility of solid cyclopentene in liquid argon at 87.3 K is (5.11 ± 0.44) × 10^–6 and (4.60 ± 0.76) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbons in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for investigated solid hydrocarbons than is liquid nitrogen.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.     

Synthese und Charakterisierung neuer intramolekular stickstoffstabilisierter Organoaluminium‐ und Organogalliumalkoxide

Synthesis and Characterization of New Intramolecularly Nitrogen‐stabilized Organoaluminium‐ and Organogallium Alkoxides The intramolecularly nitrogen stabilized organoaluminium alkoxides [Me₂Al{μ‐O(CH₂)₃NMe₂}]₂ ( 1a ), Me₂AlOC₆H₂(CH₂NMe₂)₃‐2,4,6 ( 2a ), [(S)‐Me₂Al{μ‐OCH₂CH(i‐Pr)NH‐i‐Pr}]₂ ( 3a ) and [(S)‐Me₂Al{μ‐OCH₂CH(i‐Pr)NHCH₂Ph}]₂ ( 4 ) are formed by reacting equimolar amounts of AlMe₃ and Me₂N(CH₂)₃OH, C₆H₂[(CH₂NMe₂)₃‐2,4,6]OH, (S)‐i‐PrNHCH(i‐Pr)CH₂OH, or (S)‐PhCH₂NHCH(i‐Pr)CH₂OH, respectively. An excess of AlMe₃ reacts with Me₂N(CH₂)₂OH, Me₂N(CH₂)₃OH, C₆H₂[(CH₂NMe₂)₃‐2,4,6]OH, and (S)‐i‐PrNHCH(i‐Pr)CH₂OH producing the “pick‐a‐back” complexes [Me₂AlO(CH₂)₂NMe₂](AlMe₃) ( 5 ), [Me₂AlO(CH₂)₃NMe₂](AlMe₃) ( 1b ), [Me₂AlOC₆H₂(CH₂NMe₂)₃‐2,4,6](AlMe₃)₂ ( 2b ), and [(S)‐Me₂AlOCH₂CH(i‐Pr)NH‐i‐Pr](AlMe₃) ( 3b ), respectively. The mixed alkyl‐ or alkenylchloroaluminium alkoxides [Me(Cl)Al{μ‐O(CH₂)₂NMe₂}]₂ ( 6 ) and [{CH₂=C(CH₃)}(Cl)Al{μ‐O(CH₂)₂NMe₂}]₂ ( 8 ) are to obtain from Me₂AlCl and Me₂N(CH₂)₂OH and from [Cl₂Al{μ‐O(CH₂)₂NMe₂}]₂ ( 7 ) and CH₂=C(CH₃)MgBr, respectively. The analogous dimethylgallium alkoxides [Me₂Ga{μ‐O(CH₂)₃NMe₂}]₂ ( 9 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)NH‐i‐Pr}]_n ( 10 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)NHCH₂Ph}]_n ( 11 ), [(S)‐Me₂Ga{μ‐OCH₂CH(i‐Pr)N(Me)CH₂Ph}]_n ( 12 ) and [(S)‐Me₂Ga{μ‐OCH₂(C₄H₇NHCH₂Ph)}]_n ( 13 ) result from the equimolar reactions of GaMe₃ with the corresponding alcohols. The new compounds were characterized by elemental analyses, ¹H‐, ¹³C‐ and ²⁷Al‐NMR spectroscopy, and mass spectrometry. Additionally, the structures of 1a , 1b , 2a , 2b , 3a , 5 , 6 and 8 were determined by single crystal X‐ray diffraction.