Binding N2, N2H2, N2H4, and NH3 to transition-metal sulfur sites: modeling potential intermediates of biological N2 fixation

In the quest for low-molecular-weight metal sulfur complexes that bind nitrogenase-relevant small molecules and can serve as model complexes for nitrogenase, compounds with the [Ru(PiPr(3))('N(2)Me(2)S(2)')] fragment were found ('N(2)Me(2)S(2)'(2-)=1,2-ethanediamine-N,N'-dimethyl-N,N'-bis(2-benzenethiolate)(2-)). This fragment enabled the synthesis of a first series of chiral metal sulfur complexes, [Ru(L)(PiPr(3))('N(2)Me(2)S(2)')] with L=N(2), N(2)H(2), N(2)H(4), and NH(3), that meet the biological constraint of forming under mild conditions. The reaction of [Ru(NCCH(3))(PiPr(3))('N(2)Me(2)S(2)')] (1) with NH(3) gave the ammonia complex [Ru(NH(3))(PiPr(3))('N(2)Me(2)S(2)')] (4), which readily exchanged NH(3) for N(2) to yield the mononuclear dinitrogen complex [Ru(N(2))(PiPr(3))('N(2)Me(2)S(2)')] (2) in almost quantitative yield. Complex 2, obtained by this new efficient synthesis, was the starting material for the synthesis of dinuclear (R,R)- and (S,S)-[micro-N(2)[Ru(PiPr(3))('N(2)Me(2)S(2)')](2)] ((R,R)-/(S,S)-3). (Both 2 and 3 have been reported previously.) The as-yet inexplicable behavior of complex 3 to form also the R,S isomer in solution has been revealed by DFT calculations and (2)D NMR spectroscopy studies. The reaction of 1 or 2 with anhydrous hydrazine yielded the hydrazine complex [Ru(N(2)H(4))(PiPr(3))('N(2)Me(2)S(2)')] (6), which is a highly reactive intermediate. Disproportionation of 6 resulted in the formation of mononuclear diazene complexes, the ammonia complex 4, and finally the dinuclear diazene complex [micro-N(2)H(2)[Ru(PiPr(3))('N(2)Me(2)S(2)')](2)] (5). Dinuclear complex 5 could also be obtained directly in an independent synthesis from 1 and N(2)H(2), which was generated in situ by acidolysis of K(2)N(2)(CO(2))(2). Treatment of 6 with CH(2)Cl(2), however, formed a chloromethylated diazene species [[Ru(PiPr(3))('N(2)Me(2)S(2)')]-micro-N(2)H(2)[Ru(Cl)('N(2)Me(2)S(2)CH(2)Cl')]] (9) ('N(2)Me(2)S(2)CH(2)Cl'(2-) =1,2-ethanediamine-N,N'-dimethyl-N-(2-benzenethiolate)(1-)-N'-(2-benzenechloromethylthioether)(1-)]. The molecular structures of 4, 5, and 9 were determined by X-ray crystal structure analysis, and the labile N(2)H(4) complex 6 was characterized by NMR spectroscopy.     

Production ofL-glutamate oxidase andin situ monitoring of oxygen uptake in solid state fermentation ofstreptomyces sp. Nl

Effects of water content and carbon and nitrogen sources on the production ofL-glutamate oxidase (GOD) by solid state fermentation (SSF) ofStreptomyces sp. N₁ were investigated in a 250-mL shake flask. The results show that in the solid medium containing wheat bran 98% (w/w), KCl 0.2% (w/w), and MgCl₂ 0.2% (w/w), addition of 2.0-mL water per gram solid medium and 0.4% (w/w) (NH₄)₂SO₄ was the best for GOD production. In this work, we also developed a simple technique forin situ measuring oxygen uptake rate (OUR) and carbon dioxide evolution rate (CER) in SSF in a shake flask based on the principle of Warburg manometer. The method was successfully applied to determine OUR and CER values in SSF ofStreptomyces sp. N₁. The results indicate that the largest OUR value was detected about one or two days ahead of the highest GOD activity reached depending on the fermentation conditions, and the OUR may be used as anin situ indicator of GOD production in the SSF process.     

聚氯乙烯结构缺陷和热不稳定性之间关系的研究 2.各种结构缺陷含量和热脱氯化氢速率之间的关系

本工作采用溴加成法、酚解法、FTIR法及臭氧裂解法分别测定了五种不饱和蒸气压下聚合的PVC样品(u-PVC)和五种商品PVC样品(s-PVC)的总双键、总不稳定氯、孤立双键和内部双键的含量.通过研究结构缺陷和PVC的平均分子量及脱HCl速率的相互关系,揭示了不饱和总双键值,总不稳定氯和孤立双键含量彼此的相关性是建立在它们分别与1/M_n的相关性基础之上,从而得出了这三种定量值测得的主要都是端基烯丙基氯结构.根据三者对脱HCl速率的良好线性相关性,首次提出了端基烯丙基氯结构在HCl催化作用下异构化成内部烯丙基氯从而成为脱HCl速率主要原因的机理.     

Random walk properties of lattices and correlation factors for diffusion via the vacancy mechanism in crystals

Random walk properties and correlation factors for diffusion via the vacancy mechanism are calculated and compared for various three-dimensional lattices. By applying the theory of random walks on an imperfect lattice, the correlation factor for impurity diffusion is calculated rigorously for the five jump frequency model in the fee lattice.Presented at the Symposium on Random Walks, Gaithersburg, MD, June 1982.     

Carbon-Supported Silver Catalysts for CO Selective Oxidation in Excess Hydrogen

Carbon materials were used as supports for Ag catalysts that are prepared using the conventional wet impregnation method, and their catalytic properties for CO selective oxidation in excess hydrogen at temperatures below 483 K were tested. A variety of techniques, e.g. N2 adsorption, XPS, TPD, UV-Vis DRS, TEM and SEM, were used to determine the influence of physical and chemical properties of the carbon on the properties of Ag catalyst. It was found that defects on the carbon surface served as nucleation sites for silver ions, while functional groups on carbon surface induced their reduction to the metallic form. The formation of silver particles on carbon was governed by homogeneous and/or heterogeneous nucleation during the impregnation and subsequent activation processes. The best catalytic performance was obtained with a Ag/carbon black catalyst with a uniform size distribution of silver nanoparticles (about 12 nm), moderate BET surface area (with a mesoporous structure), and a limited amount of carbon-oxygen groups. The research indicates that carbon materials are potentially good supports for silver catalysts for preferential oxidation of CO in excess hydrogen.     

诱导效应指数与含硫含氮的低碳直链有机化合物的标准汽化热

本文利用诱导效应指数建立了含硫含氮的低碳直链有机物的标准汽化热的简单估算方法，我们利用此法计算了一些含硫含氮的直链有机物的标准汽化热，４１个可比较值的相对误差均在５％以内。     

SrTi0.9M0.1O3-δ钙钛矿型氧化物催化剂甲烷氧化偶联反应性能的研究

The structure and catalytic properties of SrTi_0.9M_0.1O_3-δ (M=Mg，Al， Zr) perovskite-type catalysts for ox-idative coupling of methane (OCM) have been studied by using X-ray diffraction (XRD)，X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption of oxygen(O₂-TPD) methods. It has been shown that doping the cations of lower valence (e.g. Mg²⁺， Al³⁺) to the B site of SrTi_0.9M_0.1O_3-δ perovskite-type catalysts results in the higher content of adsorbed oxygen species on the surface of catalysts and thus higher C₂-selectivity for OCM reaction. It is suggested that the oxygen vacancies of SrTi_0.9M_0.1O_3-δ (M=Mg， Al， Zr) perovskite-type catalysts are the sites responsible for oxygen activation， and the adsorbed oxygen species on the surface of SrTi_0.9M_0.1O_3-δ catalysts are the main active species for OCM reaction.     

Iron(II)‐ and Cobalt(II) Complexes with Tridentate Bis(imino)pyridine Nitrogen Ligands Bearing Chiral Bulky Aliphatic and Aromatic Substituents: Crystal Structure of [CoCl2{2, 6‐bis[R‐(+)‐(bornylimino)methyl]pyridine}]

Iron(II) and cobalt(II) complexes ( 7 ‐ 15 ) based on new aldimine 2, 6‐bis[(imino)methyl]pyridine ( 1 , 2 , 4 , 6 ) and ketimine (2, 6‐bis[(imino)ethyl]pyridine ( 3 , 5 ) ligands with bulky chiral aliphatic or aromatic terminal groups have been prepared and characterized by ¹H NMR, ¹³C NMR, IR‐, mass spectroscopy (EI), and elemental analysis. The complex [CoCl₂(BBoMP)]·¹/₂ CHCl₃ ( 13 ) (BBoMP: 2, 6‐bis{(R‐(+)‐(bornylimino)‐methyl}pyridine) crystallizes in monoclinic space group P2₁ with cell dimensions: a = 7.6603(11) Å, b = 28.3153(14) Å, c = 13.537(2) Å, V = 2908.1(6) ų, Z = 4. The coordination sphere around Co is distorted trigonal bipyramidal.     

Lewis adducts of the side-on end-on dinitrogen-bridged complex [{(NPN)Ta}2(mu-H)2(mu-eta 1:eta 2-N2)] with AlMe3, GaMe3, and B(C6F5)3: synthesis, structure, and spectroscopic properties

Reaction of the side-on end-on dinitrogen complex [{(NPN)Ta}(2)(mu-H)(2)(mu-eta(1):eta(2)-N(2))] (1; in which NPN=(PhNSiMe(2)CH(2))(2)PPh), with the Lewis acids XR(3) results in the adducts [{(NPN)Ta}(2)(mu-H)(2)(mu-eta(1):eta(2)-NNXR(3))], XR(3)=GaMe(3) (2), AlMe(3) (3), and B(C(6)F(5))(3) (4). The solid-state molecular structures of 2, 3, and 4 demonstrate that the N-N bond length increases relative to those found in 1 by 0.036, 0.043, and 0.073 A, respectively. In solution complexes 2-4 are fluxional as evidenced by variable-temperature (1)H NMR spectroscopy. The (15)N{(1)H} NMR spectra of 2-4 are reported; furthermore, their vibrational properties and electronic structures are evaluated. The vibrational structures are found to be closely related to that of the parent complex 1. Detailed spectroscopic analysis on 2-4 leads to the identification of the theoretically expected six normal modes of the Ta(2)N(2) core. On the basis of experimental frequencies and the QCB-NCA procedure, the force constants are determined. Importantly, the N-N force constant decreases from 2.430 mdyn A(-1) in 1 to 1.876 (2), 1.729 (3), and 1.515 mdyn A(-1) (4), in line with the sequence of N-N bond lengths determined crystallographically. DFT calculations on a generic model of the Lewis acid adducts 2-4 reveal that the major donor interaction between the terminal nitrogen atom and the Lewis acid is mediated by a sigma/pi hybrid molecular orbital of N(2), corresponding to a sigma bond. Charge analysis performed for the adducts indicates that the negative charge on the terminal nitrogen atom of the dinitrogen ligand increases with respect to 1. The lengthening of the N-N bond observed for the Lewis adducts is therefore explained by the fact that charge donation from the complex fragment into the pi* orbitals of dinitrogen is increased, while electron density from the N-N bonding orbitals p(sigma) and pi(h) is withdrawn due to the sigma interaction with the Lewis acid.     

Titanium-based molecular squares and rectangles: syntheses by self-assembly reactions of titanocene fragments and aromatic N-heterocycles

This paper reports on the potential of titanium compounds as building blocks for supramolecular polygons. Self-assembly reactions of low-valent titanocene units and N-heterocyclic bridging ligands lead to novel titanium-based supramolecular squares. Pyrazine (3), 4,4'-bipyridine (4), and tetrazine (5) were used as bridging ligands, and the acetylene complexes [Cp2Ti{eta2-C2(SiMe3)2}] (1) and [(tBuCp)2Ti{eta2-C2(SiMe3)2}] (2) as sources of titanocene fragments. Molecular rectangles can be synthesized by stepwise reduction of the titanocene dichlorides [Cp(2)TiCl2] and [(tBuCp)2TiCl2] and consecutive coordination of two different bridging ligands. The resulting complexes are the first examples of molecular rectangles containing bent metallocene corner units. Single-crystal X-ray analyses of the tetranuclear compounds revealed the geometric properties of the molecular polygons in the solid state. Comparison of bond lengths and angles in coordinated and free ligands reveals the reduced state of the bridging ligand in the low-valent titanium compounds. The syntheses and properties of these novel, highly air- and moisture-sensitive compounds are discussed.