Phase transition and mixed oxide-proton conductivity in germanium oxy-apatites

La_9.75□_0.25(Ge₆O₂₄)O_2.62 oxy-apatite shows a phase transition from triclinic to hexagonal symmetry at approximately 1020 K that has been characterised by high-temperature synchrotron X-ray and neutron powder diffraction, and ionic conductivity measurements. The crystal structure at 1073 K has been determined from joint Rietveld refinements of synchrotron X-ray and neutron powder diffraction data. The study shows that hexagonal-La_9.75□_0.25(Ge₆O₂₄)O_2.62 contains interstitial oxygen at the position previously reported for other oxy-germanates. Changes in the oxide conductivity associated with this structural transition are discussed. The thermal analyses showed a weight loss on heating close to 600 K very likely due to water release. The synchrotron thermodiffractometric study shows an anomaly in the cell parameters evolution at that temperature, which indicates that this residual water is located into the apatite channels. The electrical characterisation under different atmospheres (dry and wet synthetic air) indicates that there is a significant proton contribution to the overall conductivity below 600 K, mainly under wet atmosphere.     

Boson peak and fast relaxation process near the glass transition in polystyrene

Atactic polystyrene, both side group and main chain deuterated, was investigated by inelastic neutron scattering in a wide temperature range around the glass transition from 2 to 450 K. In the glass the Boson peak position is only very weakly influenced by the deuteration of the phenyl group. In the neighborhood of the glass transition temperatureT _g we find a fast relaxation process similar to other glasses. The onset of the fast relaxation in polystyrene, however, is observed already at temperaturesT _g — 200 K. Results from partially deuterated polystyrene suggest a change of the phenyl ring dynamics already far belowT _g.     

The Role of Chemistry in the Development of Boron Neutron Capture Therapy of Cancer

A therapeutic method that selectively destroys malignant cells in the presence of normal cells is a highly valued goal of oncologists and the possible salvation of cancer patients afflicted with some incurable forms of the disease. Selective cell destruction is, in principle, possible with a binary therapeutic strategy based upon the neutron capture reaction observed with the ¹⁰B nucleus and a neutron of low kinetic energy (thermal neutron). This nuclear fission reaction produces both ⁴He and ⁷Li⁺ nuclei along with about 2.4 MeV of kinetic energy and weak γ-radiation. Since the energetic and cytotoxic product ions travel only about one cell diameter in tissue one may specify the cell type to be destroyed by placing innocent ¹⁰B nuclei on or within only the doomed cells. This article describes the current status of chemical research aimed at the eventual adoption of this therapeutic method (boron neutron capture therapy or BNCT). The multidisciplinary nature of this research effort involves chemistry, biology, nuclear physics, medicine, and related specialties. Methods devised for bringing ¹⁰B nuclei to tumor cells in therapeutic amounts are correlated with the structure of a generalized cell and the various cellular compartments available for boron localization. The synthesis methods employed for the creation of boron-containing biomolecules and drugs are presented along with representative data concerning their efficacy in tumor localization. The outlook for BNCT is especially bright at this time because of rapid developments in the fields of bioorganometallic chemistry, microbiology, immunology, and nuclear science, to name but a few. Very effective boron delivery vehicles have been demonstrated, and through the interaction of chemistry and biology these species are undergoing further improvement and evaluation of their suitability for BNCT.     

The IINS, IR and DFT studies of hydrogen bonds in 6-Furfuryl and 6-Benzylaminopurines

FTIR and IINS spectra of 6-Furfurylaminopurine (6-FAP) and 6-Benzylaminopurine (6-BAP) taken at different temperatures have been analysed and compared with the spectra calculated by the ab initio DFT/B3LYP method and the semiempirical PM3 method in the isolated molecule approximation, for the tautomers N3-H, N7-H and N9-H, and dimers with hydrogen bonds. For 6-FAP the best agreement between the calculated and experimental (at 20 K) spectra has been found for the N9-H tautomer, whose structure was established by X-ray diffraction. For 6-BAP the analogous agreement for the N9-H tautomer structure has been poor and much better for the N7-H tautomer. The vibrational spectra calculated for dimers of the molecules studied involved in hydrogen bonds, permitted also an interpretation of the bands whose positions and FWHM in the FTIR spectra changed with temperature.     

Mechanical properties of SBR-networks: I. Determination of crosslink densities by stress-strain-measurements

The tube model is applied for the treatment of stress-strain measurements on SBR networks. It is shown that this theory allows the separation of crosslink and constraint contributions to the stress-strain behavior and, also, a reliable determination of crosslink densities. The consideration of dynamical contributions is discussed and a special numerical method is developed.     

Small angle neutron scattering studies on nonaqueous dispersions of calcium carbonate Part 2. Determination of the form factor for concentric spheres

Colloidal dispersions of calcium carbonate, stabilised primarily by a surface active agent, in both toluene and dodecane have been examined by small angle neutron scattering. A model has been developed to simulate the scattering behaviour of the particles and is based on the idea of a concentric sphere with a homogeneous layer of adsorbed material surrounding a core particle. Computations based on the model show a wide variation of scattering behaviour with variation of the coherent scattering length of the dispersion medium. These predictions were confirmed by experiment. A method is described for analysis of the experimental data which leads to a determination of the thickness of the adsorbed layer, the radius of the core particle and the standard deviation of core particle radius.     

Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

New NIST sediment SRM for inorganic analysis

NIST maintains a portfolio of more than 1300 standard reference materials (SRM), more than a third of these relating to measurements in the biological and environmental fields. As part of the continuous renewal and replacement efforts, a set of new marine sediments has been recently developed covering organic and inorganic determinations. This paper describes the steps taken in sample preparation, homogeneity assay, and analytical characterization and certification with specific emphasis on SRM 2702 inorganics in marine sediment. Neutron activation analysis showed the SRM to be highly homogeneous, opening the possibility for use with solid sampling techniques. The certificate provides certified mass fraction values for 25 elements, reference values for eight elements, and information values for 11 elements, covering most of the priority pollutants with small uncertainties of only several percent relative. The values were obtained by combining results from different laboratories and techniques using a Bayesian statistical model. An intercomparison carried out in field laboratories with the material before certification illustrates a high commutability of this SRM.Electronic Supplementary Material Supplementary material is available in the online version of this article at