Derivatives of the closo-dodecaborate anion and their application in medicine

The paper presents a comparative analysis of the possibilities and characteristic features of the application of various polyhedral boron compounds, viz., the closo-decaborate anion [B₁₀H₁₀]^2–, the closo-dodecaborate anion [B₁₂H₁₂]^2–, the carba-closo-dodecaborate anion [CB₁₁H₁₂]^–, carboranes C₂B₁₀H₁₂, and the bis(dicarbollide) complexes [M(C₂B₉H₁₁)₂]^– (M = Fe, Co, or Ni), in boron neutron capture therapy (BNCT) for cancer. The requirements on compounds used in BNCT are formulated and the advantages of the application of the closo-dodecaborate anion are considered. The data on the synthesis of various derivatives of the closo-dodecaborate anion, which either already found use in BNCT or are most promising in this field, are summarized. The possibilities of the application of agents derived from the closo-dodecaborate anion in medical diagnostics are discussed.     

Some aspects of quality assessment of the k0-based method of NAA

Neutron activation analysis is one of the analytical techniques often used for certification of reference materials. The k₀-based method of instrumental neutron activation analysis can also be applied in intercomparison runs in the certification process and therefore it is desirable to know its accuracy in advance. Possible systematic errors related to the application of nuclear data at given neutron flux rate parameters, that can affect the uncertainties of the results obtained by this specific method, are elucidated and error propagation factors calculated for a typical irradiation position in the TRIGA Mark II reactor of the Jozef Stefan Institute. It was found that these uncertainties are at the level of 1–2% on the average.     

Structure and Phase Transitions of SnP2O7

SnP₂O₇ is a member of the ZrP₂O₇ family of materials, several of which show unusual thermal expansion behavior over certain temperature ranges and which show a number of displacive phase transitions on cooling from high temperature. Here we describe the structural properties of SnP₂O₇ from 100 to 1243 K as determined by X-ray and neutron powder diffraction. These studies reveal that SnP₂O₇ shows two phase transitions in this temperature range. At room temperature the material has a pseudo-cubic 3×3×3× superstructure. Electron diffraction studies show that the symmetry of this structure is P2₁3 or lower. On warming to ∼560 K it undergoes a phase transition to a structure in which the subcell reflections show a triclinic distortion; above 830 K the subcell reflections show a rhombohedral distortion. Significant hysteresis in cell parameters is observed between heating and cooling. The structure of SnP₂O₇ is discussed with references to other members of the AM₂O₇ family of materials.     

Synchrotron-radiated X-ray and neutron diffraction study of native cellulose

Precise determination of d-spacings and compositional ratio of cellulose I_α and I_β in various native cellulose samples was successfully carried out by synchrotron-radiated X-ray diffraction and time-of-flight (TOF) neutron diffraction from quasi-powder specimens. X-ray diffraction peaks were separated by the deconvolution method using six types of profile function: Gaussian, Lorentzian, intermediate Lorentzian, modified Lorentzian, pseudo-Voigt, and Pearson VII. In terms of R-factors, the pseudo-Voigt function gave the best fit with the observation, and was used for determination of d-spacings. The numerical results for Valonia cellulose were: dI_α (1 0 0) = 0.613 nm; dI_β (1 1 0) = 0.603 nm; dI_β (1 1 0) = 0.535 nm; dI_α (0 1 0) = 0.529 nm; I_α content = 0.65. The differences determined between dI_α (1 0 0) and dI_β (1 1 0) and between dI_β (1 1 0) and dI_α (0 1 0) were similar to those previously reported. Comparison between unresolved peaks for the two types of cellulose samples revealed a small but definite difference between dI_α (1 1 0) and dI_β (2 0 0). The TOF neutron diffractometry using deuterated samples confirmed this difference. This revised version was published online in August 2006 with corrections to the Cover Date.     

热处理及与KOH共炭化对深度脱除煤中无机矿物质的促进作用

研究了煤经热处理（炭化）以及煤与ＫＯＨ共炭化对酸洗脱灰的影响。结果表明，煤经炭化再用盐酸洗涤，可以在缓和的条件下大幅度提高酸洗脱灰率；煤与ＫＯＨ共炭化后再酸洗，不仅对煤中的粘土、黄铁矿等无机矿物质有很好的效果，还特别适于脱除在一般情况下都难以除去的石英矿物。     

Synthesis, Crystal and Magnetic Structures of the Sodium Ferrate (IV) Na4FeO4 Studied by Neutron Diffraction and Mössbauer Techniques

The alkali sodium ferrate (IV) Na₄FeO₄ has been prepared by solid-state reaction of sodium peroxide Na₂O₂ and wustite Fe_1−xO, in a molar ratio Na/Fe=4, at 400°C under vacuum. Powder X-ray and neutron diffraction studies indicate that Na₄FeO₄ crystallizes in the triclinic system P−1 with the cell parameters= a=8.4810(2) Å, b=5.7688(1) Å, c=6.5622(1) Å, α=124.662(2)°, β=98.848(2)°, γ=101.761(2)° and Z=2. Na₄FeO₄ is isotypic with the other known phases Na₄MO₄ (M=Ti, Cr, Mn, Co and Ge, Sn, Pb). The solid solution Na₄Fe_xCo_1−xO₄ exists for x=0-1 and we have followed the evolution of the cell parameters with x to determine the lattice parameters of the triclinic cell of Na₄FeO₄. A three-dimensional network of isolated FeO₄ tetrahedra connected by Na atoms characterizes the structure. This compound is antiferromagnetic below T_N=16 K. At 2 K the magnetic cell is twice the nuclear cell and the magnetic structure is collinear (μ_Fe=3.36(12) μ_B at 2 K). This black compound is highly hygroscopic. In water or on contact with the atmospheric moisture it is disproportionated in Fe³⁺ and Fe⁶⁺. The Mössbauer spectra of Na₄FeO₄ are fitted with one doublet (δ=− 0.22 mm/s, Δ=0.41 mm/s at 295 K) in the paramagnetic state and with a sextet at 8K. These parameters characterize Fe⁴⁺ high-spin in tetrahedral FeO₄ coordination.     

Crystal Structure, Electric and Magnetic Properties of Layered Cobaltite β-NaxCoO2

The layered oxide thermoelectric material β-Na_0.67CoO₂ has been studied by powder neutron diffraction, electric and magnetic measurements. This compound includes an edge-sharing CoO₆ slab and a highly vacant Na⁺ sheet in a unit cell (space group symmetry C2/m, a=4.9023(4) Å, b=2.8280(2) Å, c=5.7198(6) Å and β=105.964(6)° at 300 K). The evaluated formal valence of cobalt ion, +3.33(1), is ascribed to the coexistence of Co³⁺ and Co⁴⁺ in the ratio 2:1. Polycrystalline β-Na_0.67CoO₂, a p-type thermoelectric material, exhibits metallic behavior of the electric resistivity below 300 K. The Curie-Weiss-type magnetic susceptibility indicates antiferromagnetic interactions between magnetic cobalt ions in the edge-sharing CoO₆ slab.     

A Structural Investigation of La2(GeO4)O and Alkaline-Earth-Doped La9.33(GeO4)6O2

The structures of the oxyorthogermanate La₂(GeO₄)O and the apatite-structured La_9.33(GeO₄)₆O₂ have been refined from powder neutron diffraction data. La₂(GeO₄)O crystallizes in a monoclinic unit cell (P2₁/c) and is cation stoichiometric in contrast to previous reports. La_9.33(GeO₄)₆O₂ crystallizes in a hexagonal unit cell (P6₃/m) and the powder diffraction data show anisotropic peak broadening that is observed in electron diffraction patterns as incommensurate diffuse spots at hkq reciprocal planes (with q=1.6-1.7) and can be attributed to a correlated disorder in the “apatite channels”. This compound was doped up to a nominal composition close to M₂La₈(GeO₄)₆O₂ with M=Ca, Sr, Ba. The dopant ions preferentially occupy the 4f sites as the number of La vacancies decreases. The measured ionic conductivity of La_9.33(GeO₄)₆O₂ is about 3 orders of magnitude larger than for La₂(GeO₄)O at high temperatures and decreases with increasing dopant content from the highest value of about 0.16 S cm⁻¹ at 1160 K.     

Small-angle neutron scattering study on microstructure of poly(N-isopropylacrylamide)-block-poly(ethylene glycol) in water

By employing small-angle neutron scattering (SANS), we investigated the microstructures of, poly(N-isopropylacrylamide) (PNIPA)-block-poly(ethylene glycol) (PEG) (NE) in deuterated water D₂O, as related to macroscopic behaviors of fluidity, turbidity and synerisis. SANS revealed following results: (i) microphase separation occurs at around above 17 °C in a temperature range of transparent sol below 30 °C. In the microdomain appeared in the transparent sol state, both block chains of PNIPA and PEG are swollen by water; (ii) for the NE solution of polymer concentration W_p > 3.5% (w/v), corresponding to opaque gel above 30 °C, a percolated structure, i.e., network-like domain is formed by NE as a result of macrophase separation due to dehydration of the PNIPA chains. As the temperature increases toward 40 °C, the network domain is squeezed along a direction parallel to the NE interface, which leads to increase of the interfacial thickness given by swollen PEG chains and to the macroscopic synerisis behavior.     

Synthesis, Electrical Properties, and Powder Neutron Crystal Structure Refinement of Pb1−xBixPt2O4 Compounds (0≤x≤0.3)

Substitution of Pb for Bi in the recently characterized mixed-valence lead-platinum oxide PbPt₂O₄ was attempted and a Pb_1−xBi_xPt₂O₄ solid solution was obtained for 0≤x≤0.3. Powder X-ray diffraction study showed that all substituted compounds crystallize with similar triclinic unit cell and PbPt₂O₄ lattice parameters. The structural model of Pb_0.7Bi_0.3Pt₂O₄ was refined from powder X-ray diffraction data using the Rietveld method and the results indicate the same crystal structure than PbPt₂O₄ with one mixed Pb/Bi atomic site. Neutron diffraction realized on the two limit compositions of the solid solution (x=0 and 0.3) allowed to confirm the PbPt₂O₄ and Pb_0.7Bi_0.3Pt₂O₄ stoichiometries. Mean oxidation degree of Pt atoms in the [PtO₄] infinite chains decreases from +3 for PbPt₂O₄ to +2.7 for Pb_0.7Bi_0.3Pt₂O₄. Conductivity measurements show a metallic behavior for all the compositions except the limit composition x=0.3 for which a semiconducting behavior appears.