Optically clear simultaneous interpenetrating polymer networks based on poly(ethylene glycol) diacrylate and epoxy. I. Preparation and characterization

Poly(ethylene glycol) diacrylate was synthesized from poly(ethylene glycol) of molecular weight 600 with acryloyl chloride in a molar ratio of 1:2. Poly(ethylene glycol) diacrylate (PEGDA) was then blended with diglycidyl ether of bisphenol A (DGEBA) in various ratios, followed by curing with 2,2′-azobisisobutyronitrile (AIBN) and isophronediamine (IPDA) simultaneously. Viscosity changes before and during IPN formation were examined with a Brookfield viscometer. Formation of H-bonding and functional group changes were investigated with FTIR. Exothermic curing thermograms were recorded with dynamic DSC. Optically clear IPNs thus obtained were characterized with rheometric dynamic spectroscopy (RDS) and scanning electron microscopy (SEM) to check possible compatibility of the two networks. Experimental results revealed that during IPN formation hydrogen bonds between PEGDA and DGEBA and interlock of networks had profound effect on viscosity change and pot-life. Complete compatibility of the IPNs was found as DGEBA content was higher than 50% by weight. The compatibility between PEGDA and DGEBA networks was evidenced from inner shift of a single damping peak in RDS. In the meantime, SEM micrographs confirmed the coincidence with the result of RDS © 1992 John Wiley &Sons, Inc.     

不同交联度的杜仲胶的红外光谱研究

研究了不同交联度的杜仲胶在室温及加热后红外光谱的变化规律．发现在室温下测定的样品红外光谱在低波数内对应链段变形振动的几个特征峰、加热后会消失或弥散，而交联度的改变对其影响不大，即使材料中结晶完全消失而变成高弹态．因此，推测这些特微峰的存在，应该和杜仲胶弹性网络中交联点间链段存在着明显的构象规整性有关．     

3-D-electron microscopy configuration of TMOS wet silica gels prepared by the quick-freeze,deep-etching-rotary-replication technique

Silica gel provides a useful medium for crystal growth; solution growth is confined to pores left free by the polymer during its development. All growth steps depend on the gel structure, which is not completely known for crystal growth conditions. Therefore, a three-dimensional (3-D) visualization has been performed for two TMOS aqueous gels, which are rather fragile: the quick-freeze, deep-etching, rotary-replication method has been applied for sample preparation. An original surface labeling technique has been used for surface recognition. The results concern the distribution of macropores that are responsible for crystal nucleation; micropores whose total volume is larger have not been visualized due to the limits of the method. These results are discussed in comparison with previous data performed by light scattering.     

集成滤波器在谱图信号除噪中的应用

本文提出了一种由神经元网络与线性自适应滤波器组成的集成滤波器的实现方法，用于谱图信号除噪处理。     

气相[（SiO2）nX]^—团簇产生机理

利用ＸｅＣｌ准分子激光烧蚀多种硅氧多孔结构材料，在负离子通道测得丰富的「（ＳｉＯ２）ｎＸ」＾－负离子团簇，并讨论了多孔网结构和表面活性基团的分布对激光能量的吸收，传输及团簇产生的重要作用。     

模式识别—人工神经网络在化学中的若干新应用

本文通过我们应用模式识别－人工神经网络方法预报新化合物、熔盐相图以及复杂化学反应体系的研究，展示应用模式识别－人工神经网络方法与物理化学理论相结合，研究化学现象的可能性和应用价值。     

人工神经网络X射线荧光光谱法测定钢中酸溶铝

建立了一种人工神经网络-X射线荧光光谱法测定钢中酸溶铝的方法，用X射线荧光光谱法测定低合金钢中总铝值，应用所建立的ANN-BP网络模型，输入总铝含量直接预测出酸溶铝含量。同时使用改进的BP算法，避免了神经网络学习中可能产生的麻痹现象。该方法用于钢中酸溶铝的测定，结果满意。     

“逐步偶联聚合反应”在研制有序交联高分子及复合物中的应用

用“逐步偶联聚合反应”这一新的合成方法可制备不同等级的微观结构可控的有序交联网状高分子,包括可溶性的一维梯形或管状高分子、不溶性的二维或三维筛板状高分子,新型的反应性梯形聚硅氧烷包括氢梯、乙烯基或丙烯基梯、乙氧基梯及其共聚物是功能性梯形高分子的前体,由此衍生出“鱼骨形”和“划艇形”液晶和非线性高分子、盘状金属络合物液晶高分子以及管状聚硅氧烷。对功能化梯形降硅氧烷进行了有趣的应用探索,包括用于稳定液