Molecular beams and model catalysis: activity and selectivity of specific reaction centers on supported nanoparticles.

Reaction kinetics on nanometer-scale particles are different from those on extended surfaces of bulk materials. This fact has been utilized for a long time to empirically maximize the performance of heterogeneous catalysts, but the understanding of the underlying effects is poor at the microscopic level. Modern molecular beam-based methods, however, allow us to derive very detailed kinetic information on catalytically active surfaces. In combination with structurally highly controlled model catalysts, microscopic insights into the activity and selectivity of specific reaction centers on catalyst nanoparticles can be obtained. This combined approach is illustrated through simple model reactions.     

重整汽油近红外光谱的稳健偏最小二乘解析

近红外光谱(ＮＩＲ)光谱复杂,组分间光谱重叠严重,目前,多元线性回归(ＭｕｌｔｉｐｌｅＬｉｎｅａｒＲｅ ｇｒｅｓｓｉｏｎ,ＭＬＲ)和偏最小二乘法(ＰａｒｔｉａｌＬｅａｓｔ ｓｑｕａｒｅｓ,ＰＬＳ)是近红外光谱分析中使用最多和效果较好的方法[1]。稳健偏最小二乘(ＲｏｂｕｓｔＰａｒｔｉａｌＬｅａｓｔ Ｓｑｕａｒｅｓ,ＲＰＬＳ)是由稳健统计学构造的具有稳健性能的多元校正方法。当化学测量中引入随机异常点或误差的内在分布偏离正态分布时,它仍能给予接近最优性能的校正,确保分析结果的准确性,是消除奇异点的非常有效的方法[2-4],…     

Homogeneous chemiluminescence system in neutral and near neutral aqueous solution with ClO2 as oxidant and its analytical application

Using ClO₂ as chemiluminescence (CL) oxidant, a novel homogeneous CL system in neutral and near neutral aqueous solution is proposed in this paper. ClO₂ could oxidize sulfite in pH 5.0–8.5 acetate buffer to produce CL emission, and pipemidic acid could sensitize the CL system. The ClO₂–SO₃²⁻–pipemidic acid reaction was used as a model CL system and explored the possibility of highly active and eco-friendly ClO₂ being used as CL oxidant in neutral and near neutral aqueous solution. Combined with flow-injection analysis, the proposed CL system was applied to the automated dissolution testing of pipemidic acid tablet. Compared with the common strong acidic or strong basic CL system, this proposed CL owns its advantages.     

Rapid biomass analysis

New, rapid, and inexpensive methods that monitor the chemical composition of corn stover and corn stover-derived samples are a key element to enabling the commercialization of processes that convert stover to fuels and chemicals. These new techniques combine near infrared (NIR) spectroscopy and projection to latent structures (PLS) multivariate analysis to allow the compositional analysis of hundreds of samples in 1 d at a cost of about $10 each. The new NIR/PLS rapid analysis methods can also be used to support a variety of research projects that would have been too costly to pursue by traditional methods.     

FTIR-spectroscopy as a highly sensitive technique to study adsorption and desorption on ionic film and single crystal surfaces

Sample/spectrum relationships are investigated using both a low resolution rapid-scanning NIR monochromator and a Fourier transform instrument capable of high resolution and are evaluated in terms of whether or not the resolution of the instrument is sufficient for measuring the natural bandwidths corresponding to the sample. Based on the sample/spectrum relationship a criterion is developed which must be followed in order to apply either derivative spectroscopy or deconvolution to enhance the resolution of overlapped bands without generating spectral artifacts.     

Simultaneous measurement of glucose and glutamine in aqueous solutions by near infrared spectroscopy

A method is described for measuring the concentrations of both glucose and glutamine in binary mixtures from near infrared (NIR) absorption spectra. Spectra are collected over the range from 5000–4000/cm (2.0–2.5μm) with a 1-mm optical path length. Glucose absorbance features at 4710, 4400, and 4300/cm and glutamine features at 4700, 4580, and 4390/cm provide the analytical information required for the measurement. Multivariate calibration models are generated by using partial least squares (PLS) regression alone and PLS regression combined with a preprocessing digital Fourier filtering step. The ideal number of PLS factors and spectral range are identified separately for each analyte. In addition, the optimum Fourier filter parameters are established for both compounds. The best overall analytical performance is obtained by combining Fourier filtering and PLS regression. Glucose measurements are established over the concentration range from 1.66–59.91 mM, with a standard error of prediction (SEP) of 0.32 mM and a mean percent error of 1.84%. Glutamine can be measured over the concentration range from 1.10–30.65 mM with a SEP of 0.75 mM and a mean percent error of 6.67%. These results demonstrate the analytical utility of NIR spectroscopy for monitoring glucose and glutamine levels in mammalian and insect cell cultures.     

利用AFM和SNOM对淋巴细胞膜表面超微结构及其光学性质的初步研究

利用原子力显微镜(Atomic Force Microscopy，AFM)对淋巴细胞表面形貌进行了形态学的初步研究，观察到了其膜表面其他显微技术所不能发现的超微结构．同时也运用扫描近场光学显微镜(Scanning Near field Optical Microscopy，SNOM)对淋巴细胞进行成像，观察了其对光的透射、吸收等光学性质，并对两种成像方法进行了比较．研究发现：淋巴细胞膜表面凹凸不平，分布着大量直径几十到几百纳米不等的小颗粒；淋巴细胞中央部位有自发荧光现象．结果表明，AFM和SNOM可作为进一步探讨淋巴细胞的结构与功能关系的有力工具．     

An orthotropic plate model for decks of suspension bridges

The main purpose of the present paper is to compare two different kinds of approaches in modeling the deck of a suspension bridge: in the first approach we look at the deck as a rectangular plate and in the second one we look at the deck as a beam for vertical deflections and as a rod for torsional deformations. Throughout this paper we will refer to the model corresponding to the second approach as the beam-rod model. In our discussion, we observe that the beam-rod model contains a larger number of elastic parameters if compared with the isotropic plate model. For this reason the beam-rod model is supposed to be more appropriate to describe the behavior of the deck of a real suspension bridge. A possible strategy to make the plate model more efficient could be to relax the isotropy condition with a more general condition of orthotropy, which is expected to increase the number of elastic parameters. In this new setting, a comparison between the two approaches becomes now possible.Basic results are proved for the suggested problem, from existence and uniqueness of solutions to spectral properties. We suggest realistic values for the elastic parameters thus obtaining with both approaches similar responses in the static and dynamic behavior of the deck. This can be considered as a preliminary article since many work has still to be done with the perspective of formulating models for a complete suspension bridge which take into account not only the deck but also the action on it of cables and hangers. With this perspective, a section is devoted to possible future developments.     

Negative-mass instability at nonsymmetrical perturbations

The negative-mass (space-charge) instability is studied within the model of a flat thin electron beam moving along the stationary uniform magnetic field in the case of nonsymmetrical perturbations. It is shown that due to the phenomenon of "phase mixing" of electron bunches the instability increments are small for perturbations with spatial scales smaller than the Larmor diameter.     

A -functional and the rate of convergence of some linear polynomial operators

We show that the -functional

where , is equivalent to the rate of convergence of a certain linear polynomial operator. This operator stems from a Riesz-type summability process of expansion by Legendre polynomials. We use the operator above to obtain a linear polynomial approximation operator with a rate comparable to that of the best polynomial approximation.