Mechanical and electrical properties of radiation-vulcanized natural rubber latex with waste eggshell powder as bio-fillers

ABSTRACT

This work investigated the mechanical, physical, morphological, and electrical (volume) resistivity properties of radiation-vulcanized natural rubber latex (RVNRL) with additions of waste eggshell (WES) powder, which contained primarily CaCO₃ (calcite). The results showed that increasing gamma irradiation doses from 0 to 30?kGy in 10-kGy increments led to decreases in the swelling ratio and elongation at break but increases in the crosslink density, tensile modulus at 500% elongation, and tensile strength of the composites. The results also suggested that increasing the WES contents from 0 to 2, 4, or 6 parts per hundred parts of rubber by weight (phr) in the composites improved the tensile modulus at 500% elongation, tensile strength, hardness (Shore A), and electrical (volume) resistivity. In addition, after undergoing thermal aging at 70°C for 96?h, the tensile modulus and hardness (Shore A) increased, while the tensile strength and elongation at break decreased. This work also compared the properties of WES/RVNRL with commercial CaCO₃/RVNRL samples at the same 4-phr content. The results indicated that both composites had similar tensile properties, implying possible replacement of commercial CaCO₃ with WES powder as an effective reinforcing filler in RVNRL.     

Density effects of heavy-ion stopping power in high temperature matter

Abstract

The stopping power and range for Xe ions in high temperature matter (partially ionized plasmas) have been calculated using the dielectric response function method. Calculations have been made for a target matter Al (Z = 13) over a wide range of temperatures and densities considering a finite temperature model. The stopping powers obtained have smaller values in comparison with those of a zero temperature model. The stopping power strongly depends on the density and temperature of the target material, and the projectile ion energy.     

Banana fiber/chemically functionalized polypropylene composites with in-situ fiber/matrix interfacial adhesion by Palsule process

Chemically functionalized maleic anhydride (MAH)-grafted polypropylene matrix has been used (in place of polypropylene as matrix with compatibilizer) to process banana fiber/chemically functionalized polypropylene (BF/CFPP) composites, without using any compatibilizer and without any fiber modification by Palsule process. Fiber/matrix interfacial adhesion generated, in-situ, due to interactions between BF and the MAH of the CFPP matrix has been established by Fourier transform infrared spectroscopy and scanning electron microscopy. Mechanical properties of the BF/CFPP composites developed by Palsule process with in-situ fiber/matrix interfacial adhesion in this study have been found to be higher than those of the matrix and it increases with increasing amounts of fibers in composites, and are better than properties of literature reported BF/polypropylene composites processed with compatibilizers. Measured modulus of BF/CFPP composites compares well with values predicted by rule of mixtures, Hrisch model, Halpin-Tsai equations and its modified Nielsen version, and with Palsule equation. The feasibility of developing natural fiber/MAH grafted polyolefin composites by Palsule process without using any compatibilizer and without any fiber treatment is demonstrated.     

Effects of molecular geometry on liquid crystalline phase behaviour: isotropic-nematic transition

The effects of range and geometry of a simple attractive square-well on the phase diagram of hard ellipsoids and hard spherocylinders is systematically studied using a simple van der Waals type theory. The orientational single particle distribution function is approximated using the Onsager trial function. The quantitative errors introduced by this are thought to be considerably smaller than the use of the van der Waals approximation, which has been shown to give qualitatively correct phase diagrams for similar models. The phase diagrams obtained for hard ellipsoids and hard spherocylinders of aspect ratios ranging between 3 and 10 with a variety of square-well attractions are found to fall into three general types. The first type shows liquid-vapour coexistence and an isotropic-nematic transition, which meet at a liquid-vapour-nematic triple point. The second type shows a marked widening of the isotropic-nematic biphasic region which pre-empts the liquid-vapour coexistence. The final phase diagram shows a strong destabilization of the nematic phase with respect to the isotropic, which results in a shift of the phase transition to higher densities and pressures as the temperature is lowered.     

A Comparative Study on the Reinforcing Effect of Aramide and PET Short Fibers in a Natural Rubber-Based Composite

Four types of chopped fibers have been studied as reinforcement additives in a standard natural rubber based, carbon black filled formulation. The fibers studied were aramide (2 types) and polyester (2 types). The chopped fibers were added on top of the carbon black filled rubber compound at 2, 4, and 8 phr levels. The extra reinforcing effect in the modulus, especially at low elongation, the increase in hardness, the anisotropic properties, and the stiffening effects have been studied together with the evaluation of the mechanical hysteresis in strain and in compression. The permanent set of the resulting rubber compounds have been evaluated as well. The best compromise in performances and price was found for a certain type of polyester fiber.     

Properties of Natural Rubber Vulcanizates/Nanosilica Composites Prepared Based on the Method of In-situ Generation and Coagulation

Using the characteristics of silica sol dispersing well in water and easy formation of silica gel when the silica sol is heated, by mixing a system of concentrated natural rubber latex and silica sol, the silica sol can in-situ generate SiO₂ particles when heated. After coagulation of the mixed system, natural rubber/nanosilica composites C(NR/nSiO₂) were obtained. The composites C(NR/nSiO₂) and their vulcanizates were studied using a rubber processing analyzer (RPA), dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM). The influence of silica contents on the C(NR/nSiO₂) vulcanizates mechanical properties, cross-linking degree, Payne effect, dissipation factor (tanδ), and the particle size and dispersion of SiO₂ in NR were investigated. The results obtained were compared with the NR/SiO₂ composites based on traditional dry mixing of bale natural rubber and precipitated silica (white carbon black). The results showed that when using a sulfur curing system with a silica coupling agent (Si69) in C(NR/nSiO₂), the vulcanizate had better mechanical properties, higher wet resistance, and lower rolling resistance than those without Si69. In the composites C(NR/nSiO₂) and their vulcanizates, the SiO₂ particles’ average grain diameter was 60 nm, and the good-dispersion of the in-situ generated SiO₂ in the rubber matrix were a significant contribution to the satisfactory properties of C(NR/nSiO₂) composites and their vulcanizates.     

细长竖直管路内自然对流沸腾临界热通量研究

l引言管内或窄小流路内的自然对流沸腾CHF的研究比较少。文献［1～41对水及氟里昂系等液体进行了实验，在Kutataladze【’］的池内沸腾无量式基础上，提出如下经验公式当L／De－－＋0时上式退化为池内沸腾公式。式中qm。x是临界热通量；Hi。是蒸发潜热；。是汽液界面张力；尸l和p。分别是液体和蒸汽的密度；9是重力加速度；c是实验常数；不同研究者之间相差很大。当L／De较大时各经验公式的计算值会相差l～2倍。式（1）没有任何物理机理的支持，仅以J和L／De之间的无量纲关系对实验值进行统计整理，对物性的实际影响、De独立于L／De的…     

下视惯性平台瞄准线稳定的数理分析

分析了下视惯性平台瞄准线稳定的工作原理,解析了惯性稳瞄平台坐标系的数学模型,在坐标转换法的基础上推导了瞄准线稳定的数学公式。     

Investigation of seismicity after the initiation of a Seismic Electric Signal activity until the main shock

The behavior of seismicity in the area candidate to suffer a main shock is investigated after the observation of the Seismic Electric Signal activity until the impending main shock. This is based on the view that the occurrence of earthquakes is a critical phenomenon to which statistical dynamics may be applied. In the present work, analysing the time series of small earthquakes, the concept of natural time chi was used and the results revealed that the approach to criticality itself can be manifested by the probability density function (PDF) of kappa(1) calculated over an appropriate statistical ensemble. Here, kappa(1) is the variance kappa(1)(=-(2)) resulting from the power spectrum of a function defined as Phi(omega)= summation operator(k=1)(N) p(k) exp(iomegachi(k)), where p(k) is the normalized energy of the k-th small earthquake and omega the natural frequency. This PDF exhibits a maximum at kappa(1) asymptotically equal to 0.070 a few days before the main shock. Examples are presented, referring to the magnitude 6 approximately 7 class earthquakes that occurred in Greece.     

大学物理实验中用坐标纸作图的规范性

大学物理实验中,作图法是数据处理中比较重要的一种方法,用坐标纸作图是数据处理训练的必要途径,但目前不少学生手工作图并不规范。总结出作图法的6条基本规则,并通过实验数据作图的实例,分析学生较为常见的手工作图不规范表现,并提出相应的教学建议。