全自动高温水解-离子色谱法测定氧化镧铈中氟、氯

为探究稀土氧化物中氟(F)和氯(Cl)元素含量的快速检测方法,通过全自动高温水解仪对氧化镧铈样品进行前处理,并利用氢氧根体系离子色谱仪检测吸收液中F-、Cl-离子的含量,建立了基于全自动高温水解-离子色谱法测定氧化镧铈中的F、Cl元素含量的快速检测方法,该方法有效避免了传统前处理方法过程复杂、分析时间慢、极易受人为干扰的问题。称取0.3g氧化镧铈样品,在氧气流量为300 mL/min,1100 ℃高温下水解燃烧20 min,吸收定容为体积20mL的吸收液,以NAOH(15mmol/L)作为淋洗液,经色谱柱分离,测得F-与Cl-在质量浓度为1.00 mg/L-15.00 mg/L范围内,质量浓度与离子色谱峰面积呈线性关系,相关系数均为0.9999。检出限分别为0.003mg/L和0.12mg/L。全自动高温水解仪联用离子色谱仪检测系统对氧化镧铈中F-的平均加标回收率测定结果为98.4%,标准偏差RSD为0.94%;对Cl-的加标回收率测定结果为97.8%,RSD为2.86%。说明该方法较高准确度及精密度,测试结果准确可靠满足企业和检测机构的测试需求,为稀土氧化中氟、氯元素含量的研究及相关产品的开发提供了理论基础。     

Efficient Oxidation of Cyclohexane over Bulk Nickel Oxide under Mild Conditions

Nickel oxide powder was prepared by simple calcination of nickel nitrate hexahydrate at 500 °C for 5 h and used as a catalyst for the oxidation of cyclohexane to produce the cyclohexanone and cyclohexanol—KA oil. Molecular oxygen (O₂), hydrogen peroxide (H₂O₂), t-butyl hydrogen peroxide (TBHP) and meta-chloroperoxybenzoic acid (m-CPBA) were evaluated as oxidizing agents under different conditions. m-CPBA exhibited higher catalytic activity compared to other oxidants. Using 1.5 equivalent of m-CPBA as an oxygen donor agent for 24 h at 70 °C, in acetonitrile as a solvent, NiO powder showed exceptional catalytic activity for the oxidation of cyclohexane to produce KA oil. Compared to different catalytic systems reported in the literature, for the first time, about 85% of cyclohexane was converted to products, with 99% KA oil selectivity, including around 87% and 13% selectivity toward cyclohexanone and cyclohexanol, respectively. The reusability of NiO catalyst was also investigated. During four successive cycles, the conversion of cyclohexane and the selectivity toward cyclohexanone were decreased progressively to 63% and 60%, respectively, while the selectivity toward cyclohexanol was increased gradually to 40%.     

GO-SWCNT Buckypapers as an Enhanced Technology for Water Decontamination from Lead

Water decontamination is an important challenge resulting from the incorrect disposal of heavy metal waste into the environment. Among the different available techniques (e.g., filtration, coagulation, precipitation, and ion-exchange), adsorption is considered the cheapest and most effective procedure for the removal of water pollutants. In the last years, several materials have been tested for the removal of heavy metals from water, including metal-organic frameworks (MOFs), single-walled carbon nanotubes (SWCNTs), and graphene oxide (GO). Nevertheless, their powder consistency, which makes the recovery and reuse after adsorption difficult, is the main drawback for these materials. More recently, SWCNT buckypapers (SWCNT BPs) have been proposed as self-standing porous membranes for filtration and adsorption processes. In this paper, the adsorption capacity and selectivity of Pb²⁺ (both from neat solutions and in the presence of other interferents) by SWCNT BPs were evaluated as a function of the increasing amount of GO used in their preparation (GO-SWCNT buckypapers). The highest adsorption capacity, 479 ± 25 mg g⁻¹, achieved for GO-SWCNT buckypapers with 75 wt.% of graphene oxide confirmed the effective application of such materials for cheap and fast water decontamination from lead.     

Photoelectrochemical Properties of Annealed Anodic TiO2 Layers Covered with CuOx

In this work, we present a systematic study on the influence of Cu²⁺ ion concentration in the impregnation solution on the morphology, structure, optical, semiconducting, and photoelectrochemical properties of anodic CuO_x-TiO₂ materials. Studied materials were prepared by immersion in solutions with different concentrations of (CH₃COO)₂Cu and subjected to air-annealing at 400 °C, 500 °C, or 600 °C for 2 h. The complex characterization of all studied samples was performed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), reflectance measurements, Mott–Schottky analyses, and photocurrent measurements. It was found that band gap engineering based on coupling CuO with TiO₂ (E_g~3.3 eV) is an effective strategy to increase the absorption in visible light due to band gap narrowing (CuO_x-TiO₂ materials had E_g~2.4 eV). Although the photoactivity of CuO-TiO₂ materials decreased in the UV range due to the deposition of CuO on the TiO₂ surface, in the Vis range increased up to 600 nm at the same time.     

氧化镍纳米晶体的制备及其过程分析

为了开发一种新型纳米氧化镍催化剂,能有效地应用于生物质气化过程中去除焦油,本文采用均匀沉淀法成功地制备了纳米氧化镍晶体,并利用TGA、FTIR、XRD、BET、YEM等分析手段对前驱体和产品的性能进行了表征.同时,对前驱体的分解过程进行了全面的分析.分析结果表明前驱体是水合碱式碳酸镍,其分子式为NiCO3·Ni(OH)2·nH2O,它能在360℃下完全分解转化为纳米NiO,同时煅烧条件对合成纳米NiO的晶体粒径影响很大.实验证实所得纳米NiO颗粒呈球形,分散性好,纯度较高,属立方晶系结构,平均粒径约为7.5nm,其BET表面积为187.98m2/g,这显示纳米NiO晶体具有作为高效催化材料的应用可行性.     

低温制备≥99.5%多晶氧化铝陶瓷

本文通过引入稀土氧化物Y2O3、Tm2O3为烧结助剂低温制备了氧化铝含量大于99.5;的多晶氧化铝陶瓷.实验表明:稀土氧化物的加入能够明显降低99.5;多晶氧化铝陶瓷的烧结温度,提高致密度.Y2O3、Tm2O3混合烧结助剂与单一稀土氧化物的烧结助剂相比能够明显抑制晶粒的生长,促进晶粒的均匀发育.当Y2O3+Tm2O3的含量为0.3;质量分数时,99.5;多晶氧化铝陶瓷的相对密度可达99.2;理论密度,抗弯强度为533MPa,显微硬度为17.2GPa.陶瓷断裂主要以穿晶断裂为主.     

三氧化二铝-聚苯乙烯复合微球的制备

以Al2O3-PS复合材料为原料,采用乳液微封装法制备出掺杂Al2O3的PS空心微球。三相溶液分别是两个水相：蒸馏水（W1相）、5wt%PVA水溶液（W2相）和3wt%Al2O3-PS溶液（O相,苯和三氯甲烷混合物作溶剂）。所得微球表面粗糙度低于50nm。     

Kurze Originalmitteilungen Ein neues Lanthan-140-Generatorsystem

Neben ihrer breiten Anwendung in der Nuklearmedizin gewinnen Radionuklidgeneratoren zunehmend auch für die verfahrensctechnische Forsehung Bedeutung. Es konnte gezeigt warden, daß die Generatorsysteme ⁹⁹Mo/^99mTe und ¹¹³Sn/^113mI für zahlreiche Untersuchungen von Transportund Mischvorgängen in technischen Anlagen genutzt warden könnea [1, 2].

Der Radionuklidgenerator ¹¹⁰Ba/¹¹⁰La hat für den Einsatz in der Technik günstigere Eigenschaftcn als die für die Nuklearmedizin entwickelten Generatoren. Insbesondere für die Untersuchung der Materialtransportvorgänge in Polykondensationsreaktoren der Chemiefaserindustrie hat sich ein Lanthan-140-Generator gut bewährt, der mit Tributylphosphat (gesättigt mit 13 N HN03) als Elutionsmittel arbeitet [3, 4].     

Diffusion coefficients in channeling

Making use of the general formula introduced by Ohtsuki, detailed calculations for diffusion coefficients in channeling are performed. The nuclear and single electron excitations are considered separately compared with the plasmon excitation. Some analytic expressions proposed in previous paper are confirmed.