团簇增强的纳秒激光电离产生Xez+(z≤20)高价离子

利用功率密度为1011—1012W·cm-2的1064nm纳秒激光电离氙原子团簇，在飞行时间质谱中观察到电离态高达+20的高价离子.不同脉冲束位置实验表明，仅当激光作用于分子束的中段时，才能观察到高价离子，且高价离子的强度随束源压力的增加而迅速增强.实验结果表明束中大尺寸团簇的存在与高价离子的形成密切相关.讨论了高价离子产生的可能机理. 关键词： 氙 纳秒激光 高价离子 飞行时间质谱     

Experimental investigation of dynamic pressure loads during dam break

The objective of this research work has been to conduct experimental measurements on a dam break flow over a horizontal dry bed in order to provide a detailed insight, with emphasis on the pressure loads, into the dynamics of the dam break wave impacting a vertical wall downstream the dam. The experimental setup is described in detail, comprising state of the art miniaturized pressure sensors, high sampling rate data acquisition systems and high frame-rate video camera. It is a 1:2 scale of the highly cited (Lee et al., 2002, Journal of Fluids Engineering, 124) article experimental apparatus. Kinematics has been analyzed focusing on the free surface and wave front evolution. Experimental observations regarding liquid height and wave front speed have found to be in agreement with existing literature. This agreement enables the authors, assuming a similar framework, to discuss the measured pressure loads as a consequence of the dam break wave front impacting on the downstream wall. These loads show a substantial variability which has been statistically characterized. The measured quantities have been compared with the scarce available data in the literature, whose consistency is discussed. Measurements have been conducted with two filling heights. Scaling effects for such heights are also analyzed. As a direct result of the present initiative, an extensive set of data for computational tools validation is provided as Supplementary Materials, including pressure signals, wave height measurements and experimental videos.     

接触爆炸荷载作用下带孔防护结构内冲击波的传播规律

采用有限元分析软件ATUODYN,对接触爆炸荷载作用下带孔防护结构内冲击波的传播进行了数值模拟,得到了防护结构孔口和内部中心处冲击波超压－时间曲线;分析了炸药量和爆心距孔口距离对防护结构内部超压、正压冲量的影响;以数值计算结果为基础,结合量纲分析,拟合得到了结构内部中心处爆炸冲击波特征参数的预估公式。     

一类脉冲中立型抛物系统振动性

考虑一类具高阶Laplace算子的脉冲中立型抛物偏微分系统的振动性,借助于一阶脉冲时滞微分不等式,得到了该类系统在Dirichlet边值条件下所有解振动的若干充分条件.所得结果充分反映了脉冲和时滞在系统振动中的影响作用.     

脉冲作用下Chen系统的非光滑分岔分析

研究了脉冲作用下Chen系统的复杂动力学行为. 对脉冲作用下的Chen系统进行了非光滑分岔分析. 该系统可经级联倍周期分岔到达混沌, 也可由周期解经鞍结分岔直接到达混沌. 最后通过Floquet理论揭示了该系统周期解的非光滑分岔机理.     

气体火花开关电阻特性

利用二极管输出电压约1 MV、脉宽约40 ns的重复频率Tesla型脉冲功率驱动源,对大间隙、高气压的重复频率氮气火花开关进行了实验研究。通过将开关等效为RLC电路,利用测量得到的形成线电压与锥形段电压来计算氮气火花开关电阻。电阻的变化情况是放电开始时刻比较大,随着放电通道的形成,电阻迅速变小,最终达到级的阻值。通过计算值与理论公式推算值比较,检验Barannik,Rompe-Weizel,Demenik,Toeple,Vlastos公式适用性,并尝试对Rompe-Weizel公式常数项进行了修正。     

等阻抗超宽带高能微波发生器模拟研究

基于等阻抗-双脉冲成形线技术,建立了一个超宽带高能高功率微波发生器理论模型。计算机模拟结果表明:利用等阻抗超宽带高功率微波发生器,可以同时产生纳秒主脉冲和皮秒前沿脉冲;通过控制皮秒脉冲成形线输出开关闭合的延迟时间,可以调制皮秒脉冲和纳秒脉冲的输出电压比值;通过调节纳秒脉冲成形线与皮秒脉冲成形线的电容比值,可以控制皮秒脉冲的脉宽和皮秒脉冲的峰值电压;利用等阻抗超宽带高功率微波发生器,可以最大限度地提高辐射脉冲能量和整个系统的能量转换效率。     

加脊TEM喇叭初步研究

针对恒阻抗TEM喇叭的上下面板电流分布不对称,采用小反射理论和阻抗渐变思想并通过设计脊结构对恒阻抗TEM喇叭进行了改进,研制了加脊TEM喇叭。仿真及实验研究结果表明:对于脉冲宽度约为1 ns的高斯脉冲,通过加脊在一定程度上改善了恒阻抗TEM喇叭上下面板电流分布的不对称性和E面辐射电场的不对称性;相对于相同口径的恒阻抗TEM喇叭,加脊TEM喇叭作为辐射天线和反射面脉冲天线馈源时系统的主轴远场辐射因子均有提高。     

菲涅耳数字全息成像系统的脉冲响应分析

数字全息成像由CCD记录数字全息图后经过计算机数值重建物光波场,这个过程从傅里叶变换角度看等同于数字全息图的频谱分析。讨论了数字成像系统的脉冲响应函数,并分别推导了其实像、虚像、零级像在平面波和球面波照射下的波前复振幅分布。结果表明,实像和虚像是移位的夫琅和费衍射分布,而零级像是CCD光瞳的菲涅耳衍射分布,且与参考光波前分布无关。     

The effect of polymer type on electric breakdown strength on a nanosecond time scale

Based on the concepts of fast polarization, effective electric field and electron impact ionization criterion, the effect of polymer type on electric breakdown strength (E_BD) on a nanosecond time scale is investigated, and a formula that qualitatively characterizes the relation between the electric breakdown strength and the polymer type is derived. According to this formula, it is found that the electric breakdown strength decreases with an increase in the effective relative dielectric constants of the polymers. By calculating the effective relative dielectric constants for different types of polymers, the theoretical relation for the electric breakdown strengths of common polymers is predicted. To verify the prediction, the polymers of PE (polyethylene), PTFE (polytetrafluoroethelene), PMMA (organic glass) and Nylon are tested with a nanosecond-pulse generator. The experimental result shows E_BD (PTFE) > E_BD (PMMA) > E_BD (Nylon) > E_BD (PE). This result is consistent with the theoretical prediction.