Technique for Monolithic Fabrication of Microlens Arrays Integrated with Infrared CCD

Based on scalar diffraction theory, 8-phase-level 256×256 elements diffractive microlens array with element dimension of 50×33 μm2 have been fabricated on the back-side of PtSi(3～5 μm) infrared CCD. The measurement results indicated that the ratio of the signal-to-noise of the infrared CCD with microlens was increased by a factor of 2.8.     

An airborne diode laser spectrometer for the simultaneous measurement of H2O and HNO3 content of stratospheric cirrus clouds

We describe a tunable diode laser spectrometer for the in situ simultaneous detection of the nitric acid and the water vapour by means of high resolution absorption spectroscopy on rovibronic lines, using a single laser emitting in the mid-infrared (5.8 μm) and a multipass cell. The instrument was designed to be installed on a high altitude aircraft, as a part of a composite payload for atmospheric aerosol studies. The instrument design criteria are discussed and the expected performances are compared with results of laboratory and field operation. Due to the high chemical activity of HNO₃, that makes difficult to use a reference cell, a fast sweep detection of direct absorption was used for the measurement. An absorption sensitivity of about 2×10⁻⁴ was achieved with an integration time of 2.5 s, corresponding to a concentration of about 4 ppb of HNO₃ in the cell and 0.1 ppb in the external aerosol. The data acquisition and processing techniques, based on the full molecular lineshape fitting are also shown and discussed, including some examples of the data acquired during the scientific flights.     

Single-cavity 8 MeV race-track microtron

This paper describes the operational details of the single-cavity race track microtron of this laboratory. The machine is capable of providing electrons of 8 MeV energy at 1 mA peak current. Important parameters of the machine and beam handling system are studied and the results are reported.     

CAEP闪光X射线机的发展

闪光X射线机技术在中国工程物理研究院(下称CAEP)已有三十年的发展历史在爆轰物理学和y射线辐照效应研究中发挥了重要作用。本文总结了CAEP几种类型闪光X射线机的研制概况,阐述了高压脉冲技术、场发射技术、强流束聚焦等的研究进展,并介绍几种装置的主要技术参数。闪光X射线机是研究爆轰物理过程及其它高速瞬变过程的重要工具。国防科学技术研究中,大型闪光X射线机的研制具有很大的意义。文中对开拓强流电了束新的应用领域提出了展望。     

多电子束契伦柯夫自由电子激光振荡器

我们对多电子束契伦柯夫自由电子激光进行了首次实验研究。280A,500kV的电子束被引入一多介质矩形谐振腔,在频率为33.4GHz处产生了1.7MW的契伦柯夫相干受激辐射。互作用效率为1.2％。     

准直孔法改善束流品质初探

本文提出了用准直孔结合调节束流导引磁场获得较好品质强流电子束的方法,运用该方法在1.5MeV直线感应加速器(LIA)进行了试验,结果准直束流前后沿明显减小,束亮度提高几倍;同时,用此方法测出了束密度及束亮度的径向分布.     

HIRFL注入器PIG离子源的研制

本文介绍了兰州重离子加速器(HIRFL)的注入器(SFC)所用PIG离子源的研制和改进工作,使用新研制的PIG源,已在注人器SFC上获得了5μA的O_(16)~(5+)及10μA的C_(16)~(4+)的离子束。     

A Suitable Active Control for Suppression the Vibrations of a Cantilever Beam

In our consideration, a comparison between four different types of controllers for suppression the vibrations of the cantilever beam excited by an external force is carried out. Those four types are the linear velocity feedback control, the cubic velocity feedback control, the non-linear saturation controller (NSC) and the positive position feedback (PPF) controller. The suitable type is the PPF controller for suppression the vibrations of the cantilever beam. The approximate solution obtained up to the first approximation by using the multiple scale method. The PPF controller effectiveness is studied on the system. We used frequency-response equations to investigate the stability of a cantilever beam. We notified that, there is a good agreement between the analytical solution and the numerical solution.     

1-3型二维柱形凹面线聚焦换能器声场特性

设计并研制了柱面结构的1-3型复合材料凹面线聚焦换能器,在提高换能器带宽的同时,可以实现声场的线聚焦。将换能器内部PZT柱作为独立声源,应用瑞利积分和叠加原理,推导出了柱形凹面换能器总声场的理论表达式。通过仿真计算分析了换能器在聚焦线上的声场特点以及相关参数对聚焦性能的影响。对换能器参数做出合理设计,使换能器在实现线聚焦的同时,声场在聚焦线上的起伏较小,从而设计并制作出聚焦性能良好的线聚焦凹面换能器探头。实验测试结果表明采用本文方法计算得到的换能器声场与实测的声场分布基本符合,柱形凹面换能器在其几何焦点附近范围内均可实现聚焦,并在侧向上形成清晰的聚焦线,其聚焦线长度为换能器的侧向结构长度,在聚焦线上声场分布起伏较小。