改进型溶胶-凝胶法制备粒径可调高染料吸附量TiO2微球及其在染敏电池光散射层中的应用

利用改进型的溶胶-凝胶法, 制得了由锐钛矿相纳米颗粒组成的TiO₂多孔微纳小球。通过调节前驱物浓度, 合成出粒径可控的尺寸分别为100, 175, 225, 475 nm的TiO₂微纳小球, 并通过电泳沉积法将合成出的小球作为光散射层引入到染料敏化太阳电池(DSSC)中。由于这种微纳小球在具备良好的光散射性能的同时也具备较高的染料吸附量, 因此相较于基于纳米颗粒的单层结构的DSSC拥有更高的光电转换效率。通过比较分析, 粒径尺寸为475 nm的微球作为光散射层的DSSC光电转换效率可以达到6.3%, 较之于基于纳米颗粒的DSSC提高了30%。     

纳米孔炭负载 MnOx 催化剂上苯甲醇氧化反应性能

 以纳米孔炭 (NC) 为载体, 采用浸渍法制备了一系列 MnOx/NC 催化剂, 并用于以空气为氧源的苯甲醇液相氧化反应. 通过 X 射线衍射、X 射线光电子能谱、N2 吸附-脱附和 H2-程序升温还原等手段对催化剂进行了表征, 考察了催化剂中 Mn 负载量和焙烧温度, 以及反应条件等对反应性能的影响. 结果表明, 10%MnOx/NC 催化剂的活性较高, 反应 4 h 后苯甲醇转化率可达 80.4%; 明显高于活性炭负载的 MnOx 催化剂. 这主要归因于其表面存在大量高分散、且易于还原的 Mn 物种.     

纳米钯催化剂对甲醇的电催化氧化

采用水热法,以甲醛作还原剂还原Pd2+-EDTA络合物,制得钛基纳米钯颗粒电极(nanoPd/Ti).扫描电子显微镜(SEM)显示,纳米钯颗粒直径约为60 nm,形成三维立体网状结构.在碱性溶液中,循环伏安及交流阻抗测试分别表明:nanoPd/Ti电极对甲醇氧化有极高的阳极电流、较低的起始氧化电位和较强的抗CO毒化能力.在nanoPd/Ti电极上甲醇电氧化反应的阻抗值较低,增加甲醇浓度,电极阻抗更低.电极对甲醇氧化具有极好的电催化活性.     

MULTIAXIAL BEHAVIOR OF NANOPOROUS SINGLE CRYSTAL COPPER： A MOLECULAR DYNAMICS STUDY

The stress-strain behavior and copper are studied by the molecular dynamics incipient yield surface of nanoporous single crystal （MD） method. The problem is modeled by a periodic unit cell subject to multi-axial loading. The loading induced defect evolution is explored. The incipient yield surfaces are found to be tension-compression asymmetric. For a given void volume fraction, apparent size effects in the yield surface are predicted： the smaller behaves stronger. The evolution pattern of defects （i.e., dislocation and stacking faults） is insensitive to the model size and void volume fraction. However, it is loading path dependent. Squared prismatic dislocation loops dominate the incipient yielding under hydrostatic tension while stacking-faults are the primary defects for hydrostatic compression and uniaxial tension/compression.     

Preparation of different graphene nanostructures for hydrogen adsorption

In this study, different types of graphene were synthesized to investigate hydrogen adsorption capacity at different pressures (0–34 bar) at room temperature (298 K). Graphene and nanoporous graphene were prepared by Chemical Vapor Deposition (CVD) method, using methane as a carbon source at a temperature of 900 °C over copper plates and nickel oxide nanocatalyst. The nickel oxide nanocatalyst was prepared by sol–gel method, whereas graphene oxide was prepared through modified Hummer's method. The products were characterized by X‐ray diffraction, field emission‐scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller and Raman spectroscopy. The adsorption of hydrogen was done by volumetric method. High adsorption capacity was achieved in nanoporous graphene because of its high pore volume (2.11 cm³/g) and large specific surface area (850 m²/g). Hydrogen adsorption values for nanoporous graphene, graphene and graphene oxide were determined as 2.56, 1.70 and 0.74 wt%, respectively. In addition, the hydrogen adsorption of graphene nanostructures fitted nicely to the selected two‐parameter and three‐parameter adsorption isotherm models. The adsorption isotherm model coefficients have been found for a 0–34 bar pressure range. The parameter values for all adsorbents showed proper conformity to the model and experimental data. Copyright © 2016 John Wiley & Sons, Ltd.     

含有序孔洞的多孔氧化铝薄膜的弹性模量测量

高纯铝箔在特定的溶液下经过电化学阳极氧化腐蚀，可在其表面生成一层多孔的非晶氧化铝层，孔大致呈六方密排，孔径分布均匀。此类薄膜具有规则的纳米级孔径，大的比表面积，可用在微纳滤方面和纳米材料组装方面。然而，对于此类薄膜力学性能的研究较少，在一定程度上限制其功能的开发和应用。为了获得此类多孔膜的弹性常数，本文用鼓膜法结合散斑干涉实验方法、单轴拉伸结合双光束干涉法和多普勒测振仪三种方法测量氧化铝多孔膜的弹性模量，得到的宏观弹性模量基本相同，并对三种方法的优缺点进行了比较，分析了多孔氧化铝膜与块状氧化铝材料或致密氧化铝膜力学性能的差并。     

Mn-Cu合金成分对去合金化法制备纳米多孔铜的影响

 采用电弧熔炼制备出前驱体Mn-Cu合金,在稀盐酸溶液中自由腐蚀去合金化,制备出具有双连续结构的纳米多孔铜。研究了前驱体合金的成分对纳米多孔铜微观结构及Mn的选择性腐蚀程度的影响。结果表明：前驱体Mn-Cu合金的Cu原子分数为43%时,其去合金化受到抑制,存在明显的未完全去合金化的岛状结构;前驱体Mn-Cu合金的Cu原子分数为32%～23%时,可完全去合金化,形成平均孔径尺寸为20～100 nm,平均系带尺寸为30～80 nm,具有双连续结构的纳米多孔铜;前驱体Mn-Cu合金的Cu原子分数低至20%时,去合金化后存在大量裂纹,形成纳米颗粒聚集体。纳米多孔铜中存在少量的残余Mn,残余Mn的原子分数随着前驱体合金Mn原子分数的增高而降低。实验表明腐蚀液浓度对纳米多孔铜形貌也存在影响。     

Improved surface-enhanced Raman scattering of patterned gold nanoparticles deposited on silicon nanoporous pillar arrays

Large-area silicon nanoporous pillar arrays (Si-NPA) uniformly coated with gold nanoparticles was synthesized, and surface-enhanced Raman scattering of rhodamine 6G adsorbed on these gold nanoparticles were studied and compared. It's found that Au/Si-NPA substrate has a significantly high Raman signal sensitivity and good homogeneity. These are attributed to gold nanoparticles with narrow particle-size distribution uniformly coated on the surface and to the enlarged specific surface area for adsorption of target molecules brought by the porous silicon pillars.