Ab initio and DFT studies on tautomerism of indazole in gaseous and aqueous phases

Electronic structure of optimized Ge₅, Ge₁₇, Ge₅–O and Ge₅ embedded in SiO₂ nanoparticles have been studied by density functional theory to find out the effect of cluster size and Ge–O bond(s) on the optical energy gap between LUMO and HOMO. It was found that the optical energy gap depends on both cluster size and the number of Ge–O bonds nonlinearly. The optical energy gap was found to be in visible light range when the Ge₅ nanoparticle has been embedded in SiO₂ matrix.     

油溶性金属Ni纳米微粒的制备与表征

纳米材料的制备、性能与应用已成为近年来的研究热点之一犤１犦。由于在催化、光学和电学材料中的广泛应用，超细单分散的金属微粒的制备与性质已引起人们的广泛兴趣。通常制备金属纳米微粒的方法有两种：一是把固体金属材料分裂为纳米尺寸的颗粒，如机械粉碎、电弧放电及金属原子蒸气沉积犤２犦，用这种方法制备的金属微粒粒径一般都比较大，且粒子尺寸分布宽，另一种是把金属原子制成纳米尺度的颗粒，如乳液聚合法犤３犦、热解犤４犦、γ－射线辐照犤５犦、脉冲电沉积犤６犦和化学还原犤７犦等，这种方法制备的微粒粒径通常分布窄且粒子小…     

铂-金交替修饰的铂核纳米颗粒的制备与表征

通过吸附在铂纳米颗粒表面的氢交替还原氯金酸和氯铂酸,得到了复合型纳米颗粒Pt@Au/Pt,用UV-Vis光谱、TEM和XRD对其进行了表征.     

Electrochemical Detection of MS2 Phage Using a Bead‐based Immunoassay and a NanoIDA

A microbead based sandwich immunoassay for MS2 bacteriophage was developed using an interdigitated array (IDA) electrode with nanoscale dimensions (220 nm electrode width, 620 nm gap). The IDA was fabricated using an electron beam lithographic lift‐off technique. After an antibody‐assisted capture of MS2 using paramagnetic microbeads, a β‐galactosidase labeled secondary antibody was used to convert p‐aminophenyl‐β‐D ‐galactopyranoside (PAPG) into the redox active p‐aminophenol (PAP). Amperometric detection of PAP with IDA electrodes at +300 and ?200 mV vs. a Ag/AgCl reference electrode was used to measure the result, detecting MS2 concentrations as low as 10 ng/mL.     

An In Situ Copper Plated Boron‐Doped Diamond Microelectrode Array for the Sensitive Electrochemical Detection of Nitrate

The first example of using a copper microelectrode array for use in electroanalysis is explored and exemplified with the electroanalytical quantification of nitrate. The analytical approach is based upon the in situ deposition of copper at a boron‐doped diamond (BDD) microelectrode array. The immobilized copper layer is electrocatalytic for nitrate reduction and exhibits an analytically useful range from 1.2 to 124 μM with a marked selectivity for nitrate ion over nitrate, with a limit of detection of 0.76 μM. The analytical applicability was examined through standard addition determinations of nitrate in drinking and river water samples.     

Synthesis, crystal structure and properties of the Cu complex of a tetradentate imidazole-functionalized diazamesocyclic ligand, 1,4-bis(N-1-methylimidazol-2-yl-methyl)-1,4-diazacycloheptane

A new potential tetradentate ligand, 1,4-bis(N-1-methylimidazol-2-ylmethyl)-1,4-diazacycloheptane (l), together with its Cu^II complex [CulCl]ClO₄ (1), has been reported. The crystal structure of 1, determined by single-crystal X-ray analysis, shows that it is in chiral P2₁2₁2₁ space group. The Cu^II centre is penta-coordinated in square pyramidal geometry and the diazacycloheptane (DACH) ring adopts normal boat configuration. The most striking feature of this complex is the formation of a 3D network bridged through the C-H?Cl hydrogen bonds with the perchlorate anions in the cavities, and stabilized via π-π stacking interactions along the a-direction. The solution behaviour of 1 has been further investigated by UV/Vis and ESR techniques.     

Application of an integrated microchip system with capillary array electrophoresis to optimization of enzymatic reactions

In this work, a combination of complementary metal-oxide semiconductor (CMOS) microchip system with capillary array electrophoresis (CAE) is demonstrated as a system for optimizing conditions for enzymatic reaction. Dimethylacridinone (DDAO)-phosphate substrate and alkaline phosphatase conjugate were selected for the enzymatic reaction, which was applicable to the enzyme-linked immunosorbent assay (ELISA) technique. Laser-induced fluorometry with a miniature semiconductor laser was used to detect the enzymatic products. The speed of the enzymatic reaction between the DDAO-phosphate and the alkaline phosphatase conjugate was investigated as a function of reaction time. The microchip-CAE detection system could determine the pH condition and the concentration of enzyme that are suitable for rapid and low-cost analysis. This result shows the feasibility of using the microchip-CAE system for application to miniaturized screening systems.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

Novel Fabrication of Conductive Polymers Contained Micro‐Array Gas Sensitive Films Using A Micromanipulation Method

A novel method for fabricating a micro gas sensor film on an indium tin oxide (ITO) electrode patterned using micro‐machining technology was developed. A micromanipulation system equipped with a counter electrode (Au; Ø10 μm) and a microsyringe, which was connected to a microinjection system, was first constructed. With this system, micro gas sensor arrays could be successfully prepared on ITO electrodes. Two kinds of micro gas sensor films were prepared, based on polythiophene (PTh) and poly(3‐n‐dodecylthiophene) (PD). The response behavior of conventional PTh and micro‐PTh films against NH₃ at three different operating temperatures (25, 40 and 60 °C) was investigated by measuring the resistance of the film. With the micro‐PTh film, a reversible response was observed against NH₃ when measured at 40 and 60 °C. In addition, the responsive characteristics of the microsensor films against different testing gases were examined at the three operating temperatures. The resistance of the microsensor films of PTh and PD changed considerably, depending on the type of testing gas, allowing these sensor films to be used for the detection of various gases. Furthermore, the microsensor films had a high stability compared with conventional films prepared from the same polymer.