Novel composite anode materials for lithium ion batteries with low sensitivity towards humidity

Graphitic anode materials for lithium ion batteries processed under high humidity conditions show severe performance losses. The sensitivity of these materials towards humidity can be significantly reduced by adsorbing metal ions like silver or copper ions, with subsequent heat treatment of these composites. Results of X-ray photoelectron spectroscopy, high-resolution electron microscopy, thermogravimetry, and differential thermal analysis indicate that the deposited metals exist in metallic and carbide, M_xC (M=Cu or Ag), forms. They remove or cover (i.e. deactivate) active hydrophilic sites at the surface of the graphite. These composites absorb less water during processing. The electrochemical performance, including reversible capacity, coulombic efficiency in the first cycle, and cycling behavior, is markedly improved. This approach provides a potentially powerful method to manufacture lithium ion batteries under less demanding conditions.Presented at the 3rd International Meeting on Advanced Batteries and Accumulators, 16–20 June 2002, Brno, Czech Republic     

Composition and thermal stability of SiO2-based hybrid materials TEOS-MTEOS system

Hybrid materials with different amounts of organics permanently bound on the inorganic network obtained in the TEOS-MTEOS (tetraethoxysilan-methyltriethoxysilan) system are used for obtaining coatings with different optical and mechanical properties. To study the thermal stability of the mentioned materials, compositions with different molar ratios of the precursors were prepared. The influence of the solvent and water amounts on the gelation process was also investigated. The gels obtained were characterised by IR spectrometry and their decomposition temperatures were determined by DTA/TG. Thermal stability of the gels is rather influenced by their composition than the conditions of the gelation process. This revised version was published online in July 2006 with corrections to the Cover Date.     

Solution Stoichiometry Control for Pure LiLaMo2O8Phases in Sol-Gel Preparation

The hydrolysis of solutions, containing either LiMo₂O₄(OPr ⁱ )₅( ⁱ PrOH) and “La(OPr ⁱ )₃” or LiOPr ⁱ and La₂Mo₄O₈(OPr ⁱ )₁₄ in 1∶1 ratio, in toluene or ⁱ PrOH, by water solutions in isopropanol, leads to formation of monolythic gels. The latter can be converted by drying and heat treatment at 600°C into a fine powder of pure α-LiLaMo₂O₈ phase, which is transformed into β-LiLaMo₂O₈ powder by annealing at 800°C. The sintering of the pellets pressed under 4 bar pressure of α-LiLaMo₂O₈ powder at 800°C for 2 h converts them into pieces of β-LiLaMo₂O₈ transparent ceramics, thus providing a route to LiLnMo₂O₈ laser waveguide materials.     

Immobilization of copper in organic-inorganic hybrid materials: a highly efficient and reusable catalyst for the Ullmann diaryl etherification

The immobilization of copper in organic-inorganic hybrid materials catalyzing the Ullmann reaction has been described. Phenols reacted with aryl iodides, aryl bromides and aryl chlorides smoothly in the presence of a 3-(2-aminoethylamino)propyl functionalized silica gel immobilized copper catalyst. The protocol involved the use of DMSO as the solvent, and potassium fluoride as the base. The reactions generated the corresponding cross-coupling products in good to excellent yields. Furthermore, the silica-supported copper could be recovered and recycled by a simple filtration of the reaction solution and used for 10 consecutive trials without loss of its reactivity.     

星状四芳胺类空穴传输材料的合成

有机电致发光器件 (ＯＥＬＤ)是继阴极射线管平板显示器 (ＣＲＴ)和液晶显示器 (ＬＣＤ)之后的第三代平板显示器。它具有主动发光、驱动电压低(2伏左右 )、发光亮度高 (1 3 0 0 0ｃｄ ｍ2 以上 ) ,无软Ｘ 射线污染 ,响应速度快 (1 0 -6 ～ 1 0 -8秒 )等优点。从 1 987年美藉华人邓清云等提出多层结构的ＯＥＬＤ的器件结构以来的十多年间 ,ＯＥＬＤ以及其材料的研究已成为显示技术以及显示材料等方面的研究热点 ,发展很快[1～ 3] 。在 1 999年日本先锋公司已开发出了单色的汽车用ＯＥＬ平板显示器商品 ,今年东芝公司又开发出了 2 .7英寸的彩…     

Imide-siloxane block copolymer/silica hybrid membranes: preparation, characterization and gas separation properties

Imide-siloxane block copolymer/silica hybrid membranes with covalent bonds were prepared via sol–gel reaction. The structural informations of these hybrid membranes were obtained by using Fourier transform-infrared spectrometry (FT-IR), ²⁹Si nuclear magnetic resonance (²⁹Si NMR), XPS and thermogravimetric analysis (TGA). The gas separation properties of the hybrid membranes were also investigated in terms of organosiloxane (PDMS) or silica content at various temperatures. In the hybrids, the addition of PDMS phase increased the permeabilities of gases such as He, CO₂, O₂, and N₂, indicating that the gas transport occurred mainly through rubbery organic matrix. Meanwhile, the PDMS phase contributed the decreased gas selectivities to nitrogen but the reduction in selectivities was very small in comparison with other siloxane containing polymeric membranes. This might be due to the restriction of chain mobility by the existence of inorganic component such as silica network in the hybrids. Additionally, the increase of silica content in these hybrid membranes considerably retarded the falling-off of gas selectivity at elevated temperature. The increase of silica content in hybrid membranes resulted in well-formed silica networks and hence these inorganic components restricted the plasticization of organic matrix by the thermal segmental motion of organic components, leading to preventing the large decrease of the gas selectivity.     

基于离子液体的炭材料制备、改性及应用

离子液体因其熔点低、液态温域宽、蒸气压低、热稳定性高、电导率高、电化学窗口宽、结构可设计及对许多化合物的亲和性等系列性能而引起人们广泛关注。离子液体在炭材料制备、改性领域展示出了良好的前景及巨大的应用潜力,可直接作为碳源,经过高温炭化实现杂原子掺杂制备多孔炭材料;离子液体也可充当反应介质和致孔剂,将生物质转化为多孔炭材料;此外,由于离子液体与炭材料相容性较好,可以用于多孔炭材料改性制备炭复合材料。基于离子液体的炭材料在电催化、超级电容器、吸附分离及生物医学等领域具有潜在的应用价值。本文总结了基于离子液体炭材料的制备、改性及应用最新研究进展,并着重介绍了其在能源和环境相关领域的应用。     

Traceability and analytical chemistry

 The basic concepts of traceability as they are defined by the Comité Consultatif pour la Cluantité de Matière are contrasted with the practical exploitation in chemical analysis. The applicability of traceability concepts are tested for their practical applicability on four different analytical methodologies, neutron activation analysis, plasma mass spectrometry, beam microscopical analysis and speciation analysis of organometallic compounds. Received: 31 March 1998 · Accepted: 6 June 1998     

The determination of adsorbable organically bound halogens (AOX) in soil: interlaboratory comparisons and reference materials

The interlaboratory variability in the quantification of adsorbable organically bound halogens (AOX) in industrially contaminated soil is presented. Three consecutive rounds of a proficiency testing scheme, in which between 88 and 119 routine laboratories participated, yielded relative reproducibility standard deviations between 7 and 20% at AOX contents between 10.9 and 268 mg kg⁻¹. Nineteen laboratories with established proficiency were invited to participate in the certification of the AOX content in three soil reference materials meant for the internal quality control in analytical laboratories. The certified values are (1349 ± 59) mg kg⁻¹, (80 ± 7) mg kg⁻¹ and (102 ± 8) mg kg⁻¹, respectively.     

Heterogeneous oxidation of pyrimidine and alkyl thioethers in ionic liquids over mesoporous Ti or Ti/Ge catalysts

Heterogeneous catalytic oxidation of a series of thioethers (2-thiomethylpyrimidine, 2-thiomethyl-4,6-dimethyl-pyrimidine, 2-thiobenzylpyrimidine, 2-thiobenzyl-4,6-dimethylpyrimidine, thioanisole, and n-heptyl methyl sulfide) was performed in ionic liquids by using MCM-41 and UVM-type mesoporous catalysts containing Ti, or Ti and Ge. A range of triflate, tetrafluoroborate, trifluoroacetate, lactate and bis(trifluoromethanesulfonyl)imide-based ionic liquids were used. The oxidations were carried out by using anhydrous hydrogen peroxide or the urea-hydrogen peroxide adduct and showed that ionic liquids are very effective solvents, achieving greater reactivity and selectivity than reactions performed in dioxane. The effects of halide and acid impurities on the reactions were also investigated. Recycling experiments on catalysts were carried out in order to evaluate Ti leaching and its effect on activity and selectivity.