Ce掺杂ZnO纳米晶的光催化性能研究

以Zn( NO3)3·6H2O、Ce( NO3)3·6H2O为原料,明胶为模板分散剂,采用凝胶模板燃烧法制备纯ZnO和Ce/ZnO纳米晶,利用XRD、TEM、BET、UV-Vis漫反射进行表征.以染料罗丹明B为目标降解物考察了样品的光催化活性.结果表明:产物粒子形状基本为球形,结晶良好,属六方晶系结构.相比纯ZnO,Ce/ZnO对光具有更高的吸收利用率,在紫外和可见光下对罗丹明B的降解能力均有明显提高;随Ce掺杂量的增加,样品的粒径减小,比表面积增大,罗丹明B的降解率相应增大,在紫外和可见光下降解率分别可达98.6;、78.3;,其原因在于Ce掺杂有利于在ZnO纳米粒子中心和表面之间产生电势差,实现光生电子-空穴对的有效分离.     

功能性无机-晶态纳米纤维素复合材料的研究进展与展望

纤维素是自然界储藏量最大,可再生且可生物降解的生物高分子。晶态纳米纤维素是天然纤维素复合材料的结构支撑体,其多级孔道结构,手性液晶排列和活性羟基官能团赋予它优异的模板效应。本篇综述回顾了功能性无机-晶态纳米纤维素复合材料的研究进展。概述组装方法,侧重讨论静电纺丝法,细菌纤维素和纤维素气凝胶模板矿化法,凝胶-溶胶法,溶液浇铸法和静电层贴法的组装特点。扼要介绍了晶态纳米纤维素的形貌和晶体结构,提取方法,排列方式,化学修饰和溶剂等。天然复合材料的生物功能与其多级结构和多元组分的协同效应息息相关,文章以木质纤维素的刚性和海参表皮的化学感应性为例,浅谈晶态纳米纤维素微束的螺旋结构和纤维素复合体的多级结构在仿生组装功能性纤维素复合材料中的应用。最后,作者对晶态纳米纤维素在设计组装功能性复合材料领域的未来方向提出了一些设想,藉此综述抛砖引玉。     

晶体相场方法模拟纳米孪晶结构

应用双模晶体相场模型,模拟共格纳米孪晶结构.结果表明:球状晶粒生长成的共格孪晶片层,在共格面上的原子排列有变形,容易出现位错;条状晶粒凝固生长成的共格孪晶界,比用球状晶粒长大生成的共格孪晶界的原子排列整齐.应用晶体相场模型,可以精确计算纳米孪晶带的厚度,设计和控制带内的原子层数,实现人工操纵纳米共格孪晶片层结构,指导实验研究纳米孪晶结构及其与性能的关系.     

电化学电容器氮化钒负极材料性能研究

利用高温氨解还原氧化钒（V₂O₅）制备了氮化钒（VN）纳米材料. 采用XRD、SEM与TEM观察分析样品的结构和形貌,采用氮气吸附、循环伏安曲线以及恒流充放电曲线测试样品的比表面积、孔径分布和电极电化学性能. 结果表明,VN样品属于立方晶系（Fm3m [225]）,其大小均一,近似球形,氨解时间的加长（12 h）,小颗粒间相互交联可形成一定的介孔. 50 mA?g-1电流密度下VN-c电极的比电容能达到192 F.g-¹,1000周期循环其比电容仍有150 F.g^-1,同时具有双电层电容性能和氧化还原反应的准电容性能.     

The synthesis and exchange bias effect of monodisperse NiO nanocrystals

Monodisperse NiO nanocrystals with an average particle size of 3 ± 0.4 nm are successfully synthesized by the thermal decomposition of Ni-oleylamine complex in an organic solvent under a continuous O2 flux. The crystalline structure and the morphology of the product are investigated by X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. Magnetization and alternating-current (ac) susceptibility measurements indicate that the structure of the particles can be considered as consisting of an antiferromagnetically ordered core and a spin-glass-like surface shell. In addition, both the exchange bias field and the vertical magnetization shift can be observed in this system at 10 K after field cooling. This observed exchange bias effect is explained in terms of the exchange interaction between the antiferromagnetic core and the spin-glass-like shell.     

不同表面活性剂对La2Ce2O7纳米晶体生长活化能的影响

以La2O3和Ce(NO3)3·6H2O为原材料,以SDBS和CTAB为表面活性剂,采用水热合成法制备了La2Ce2O7纳米晶体.通过XRD、Raman、SEM和TEM对粉体的物化性能进行了分析,讨论了不同表面活性剂对晶体生长活化能的影响.结果表明:添加两种表面活性剂的样品均为萤石结构,以CTAB为表面活性剂的样品晶粒尺寸为11.4 nm,比表面积为187.53 m2·g-1,其晶体生长活化能(16.33±0.02 kJ·mol-1)要大于添加阴离子表面活性剂(SDBS)的样品(13.47±0.03 kJ·mol-1).     

样品的形貌对CeO2湿度传感器性能的影响

使用Ce(NO3)3·6H2O为前驱物,采用水热合成法和溶胶凝胶法分别制备了不同形貌的CeO2纳米晶体(纳米带和球形颗粒).通过XRD、SEM和TEM技术表征了材料的相成分、微结构和形貌.将样品制备成湿度传感器后对传感器性能进行了测试,结果表明:具有纳米带形貌的样品所制备的传感器展示了良好的传感性能,其响应-回复时间分别为7 s 和7 s(在15;~95;湿度范围内),最大迟滞为4;,这些性能都要好于球形颗粒所制备的样品.其主要原因是纳米带样品具有较大的比表面积.     

Fe2O3对纳米晶尾矿微晶玻璃结构及性能的影响

以铁尾矿和金尾矿为主要原料,采用熔融法制备了添加0 ～ 20wt; Fe2O3的CaO-MgO-Al2O3-SiO2(CMAS)系纳米晶尾矿微晶玻璃,利用差示扫描量热分析(DSC)、X射线衍射分析(XRD)、红外光谱(IR)、扫描电镜(SEM)和综合力学性能仪等测试手段,研究了Fe2O3含量对该体系微晶玻璃显微结构及性能的影响.实验结果表明:随着Fe2O3含量的增加,样品的晶化温度和玻璃化转变温度逐渐降低;且Fe2O3可促进主晶相透辉石相(Mg0.6Fe0.2Al0.2) Ca(Si1.5Al1.5)O6的形成;同时Fe2O3能够有效减小透辉石相平均晶粒尺寸;另外,微晶玻璃的密度、显微硬度和耐碱性随晶粒尺寸的减小而增加,而抗折强度和耐酸性随晶粒尺寸的减小而降低.     

Enhancement of ferromagnetic resonance in Al203-doped CozFeAI Heusler alloy film prepared by oblique sputtering

Large and variable in-plane uniaxial magnetic anisotropy in a nanocrystalline （Co2FeA1）97.8（Al2O3）2.2 soft magnetic thin film is obtained by an oblique sputtering method without being induced by magnetic field or post anneaiing. The in-plane uniaxiai magnetic anisotropy varies from 50 Oe to 180 Oe （1 Oe=79.5775 A·m-1） by adjusting the sample＇s position. As a result, the ferromagnetic resonance frequency of the film increases from 1.9 GHz to 3.75 GHz.     

Oxygen vacancy‐induced microstructural changes of annealed CeO2−x nanocrystals

Nanocrystalline ceria (CeO₂) is known for its ionic conductivity and oxygen storage properties, which depend on the presence of oxygen ion vacancies. The vacancies cause several important changes in CeO₂ involving microstrain, electronic structure, magnetic properties, etc. In this article, we focus our attention to the microstructural changes of nanocrystalline CeO_2−x annealed at different temperatures in the range 200–500 °C. Structural and vibrational properties were investigated by X‐ray diffraction and Raman spectroscopy. It was observed that the content of oxygen vacancies changed significantly with increasing annealing temperature, which plays an important role in the observed microstructural changes of the annealed samples. We demonstrate that the observed microstrain changes, because of variable defect content, dominate over the crystallite size effect. This finding is opposite to the conclusions made by several other authors. A new mode, classified as a probable surface mode, was observed in the Raman spectra at ∼480 cm⁻¹, the appearance of which can be explained by the large defective structure and disorder in the ceria lattice. Copyright © 2011 John Wiley & Sons, Ltd.