磁学研究与三环公司发展

简要回顾了20世纪20年代以来我国现代磁学研究的历史。20世纪80年代初期正值我国改革开放浪潮之时，科技人员纷纷走上科技成果产业化道路。建立于1985年的中国科学院三环公司就是一个成功的代表，同时好也是我国现代磁学研究结出的一颗硕果。     

Nanocrystalline ceramic films for efficient conversion of light into electricity

Transparent nanocrystalline films of oxide semiconductors such as TiO₂ and Fe₂O₃ have been prepared on a conducting glass support employing a sol-gel procedure. The films are composed of nanometer-sized particles sintered together to allow for percolative charge carrier transport. The internal surface of these films is very high, roughness factors of the order of 1000 being readily obtained. Electric polarization was applied for forward and reverse biasing of the films and the resulting optical changes have been analyzed to derive their flat band potential. Band gap excitation of such nanocrystalline semiconductors produces electron-hole pairs which migrate through the film to be collected as electric current. Steady state photolysis and time resolved laser techniques have been applied to scrutinize the mechanism of light induced charge separation within the nanostructure. When derivatized with a suitable chromophore, TiO₂ films give extraordinary efficiencies for the conversion of incident photons into electric current, exceeding 90% for certain transition metal complexes within the wavelength range of their absorption band. The underlying physical principles of these astonishing findings will be discussed. Exploiting this discovery, we have developed a new type of photovoltaic device whose overall light to electric energy conversion yield is 10% under simulated AM 1.5 solar radiation.     

光电变色器件用纳米晶氧化钛薄膜的微结构与特性

纳米晶TiO2薄膜在光电变色器件中具有很重要的作用。它的微结构直接影响染料的吸附、光的散射以及电荷输运的特性。因此，探索TiO2薄膜的微结构(如粒径、表面形貌和厚度等)及光电性能是非常有意义的。采用电子束蒸发工艺制备了光电变色器件用纳晶TiO2薄膜，利用原子力显微镜、X射线衍射、俄歇电子能谱等手段对纳米晶TiO2薄膜的表面形貌、结晶状态及组分进行了分析。从理论上研究和讨论了纳米晶TiO2薄膜晶粒尺寸对光电性能的影响，并用量子限制效应解释了吸收光谱峰值波长随粒径减小而发生蓝移的现象。     

Enhancement of Overall Photovoltaic Efficiency by Changing the Position of the Attaching Group -RSO3- on the Hemicyanine Dye Molecules

A new photoresponsive D-π-A dye, mPS, has been designed and synthesized.Compared to the parent dye PS, IPCE values in the region from 400 nm to 560 nm was greatly improved upon changing the attaching group from the p- position to the o- position of the π-conjugation bridge. A solar cell based on mPS generated a remarkably high overall yield η of 5.4% under irradiation of 80.0 mW cm^-2 white light from a Xe lamp, Compared with PS, the overall yield η increased by 64%.     

Slowing down in the three-dimensional three-state Potts glass with nearest neighbor exchange ± J: A Monte Carlo study

,Static and dynamic properties of the Potts model on the simple cubic lattice with nearest neighbor -interaction are obtained from Monte Carlo simulations in a temperature range where full thermal equilibrium still can be achieved (). For a lattice size L = 16, in this range finite size effects are still negligible, but the data for the spin glass susceptibility agree with previous extrapolations based on finite size scaling of very small lattices. While the static properties are compatible with a zero temperature transition, they certainly do not prove it. Unlike the Ising spin glass, the decay of the time-dependent order parameter is compatible with a simple Kohlrausch function, , while a power law prefactor cannot be distinguished. The Kohlrausch exponent y ( T ) decreases from at [0pt] to at [0pt] however. The relaxation time is compatible with the exponential divergence postulated by McMillan for spin glasses at their lower critical dimension, but the exponent that can be extracted still differs significantly from the theoretical value, . Thus the present results support the conclusion that the Potts spin glass in d = 3 dimensions differs qualitatively from the Ising spin glass. Received: 8 October 1997 / Accepted: 27 November 1997     

Effects of pH and citric acid contents on characteristics of ester-derived BaFe12O19 powder

The single domain size of BaFe₁₂O₁₉ powder with crystallite sizes less than 200 nm was produced using a citric acid precursor method. Fe³⁺ and Ba²⁺, in a molar ratio of 12, were chelated by COOH⁻ in an aqueous solution. After ethylene glycol additions, esterification, dehydration, and calcination led to the formation of ester-derived BaFe₁₂O₁₉ powder. High pH and/or high citric acid contents in the starting solution are required to complete chelate metallic ions in the solution and to form pure barium ferrite powder at 1073 K. Pure single magnetic domain BaFe₁₂O₁₉ particles of M(30 kOe)≈54 emu/g, M_r≈28 emu/g, and H_c≈3.7 kOe were produced using [citric acid]/[metallic ions]=1.5 and pH7.     

BaTiO3纳米晶的制备和结构

ＢａＴｉＯ_３纳米晶的制备和结构方佑龄，赵文宽，邹化民，王仁卉（武汉大学化学系，武汉大学物理系，武汉，４３００７２）关键词钛酸钡纳米晶，过氧化物，制备，结构ＢａＴｉＯ３具有高介电常数及优异的铁电、压电性能，是一种重要的电子陶瓷材料，因此，对其纳米晶的?..     

沉淀法合成纳米晶长余辉材料Y2O2S∶Eu3+，Ti

The long-lasting phosphorescent materials, yttrium oxysulfides doped by Eu and Ti, were systhesized by coprecipitation with their subsequent thermal decomposition in the presence of sulphur. The products were characterized by XRD, TEM, phosphorescent spectra, and thermoluminescence. The XRD results indicate that the lowest synthesis temperature is 700 ℃. From the TEM, the average diameter of particles was in the range of 60～120 nm, and augmented with the increase of temperature. The materials under UV excitation presented well afterglow from the transition of ⁵D_0,1 → ⁷F_J of Eu³⁺, and the persistent time was about 2 h. The long-lasting afterglow mechanism was discussed, too.     

Magnetism of metal cyanide networks assembled at interfaces

Studies of metal cyanide thin films prepared directly at interfaces are reviewed. The systems range from monolayers, single-layer analogs of Prussian blue-like networks, to bulk powders prepared as thin films. Monolayer networks are prepared at the air/water interface and transferred to solid supports using Langmuir-Blodgett film methods. Films of bulk materials are prepared directly on solid surfaces using a templated sequential deposition procedure. The magnetic properties of the films have been explored, and in some cases, these monolayers and surface films give rise to new behavior that is only possible because of the fabrication method or thin film architecture. The methods of synthesis can generate oriented samples, even when the materials are poorly crystalline. Furthermore, the interface-assembled networks are inherently anisotropic, leading to phenomena not present in the solid-state analogs, such as anisotropic photomagnetism in a thin film of Rb_jCo_k[Fe(CN)₆]_l·nH₂O.     

Low Temperature Sol-Gel Preparation of Nanocrystalline TiO2 Thin Films

TiO₂ nanocrystalline thin films with varying degree of porosity have been prepared using a low temperature method. TiO₂ films of the anatase form have been obtained by using a polyethylene glycol (PEG) modified sol-gel method. Densification and crystallization of the films was found to result from the thermal treatment of the dip coated films in boiling water. The films have been characterized by Raman, XRD, FTIR, AFM and optical methods. Highly transparent films with transmission in excess of 85% and porosity as high as 58% are formed predominantly of anatase crystallites of dimensions of the order of 5 nm. Initial results on lithium intercalation into these films resulting in an efficient optical modulation in the visible and near infrared regions demonstrate a good potential of these films for electrochromic applications.