氧化钪中Ti,Mo,W,V,Zr等难熔杂质光谱分析

本用提高样品蒸发速率的方法提高氧化钪中难熔杂质光谱分析灵敏度。采用一种特殊的阴极设计，配合使用Ｎ２＋Ａｒ气氛控制，在旋流气室中放电激发，取样仅５ｍｇ的条件下，光谱测定氧化钪中难烷质Ｔｉ，Ｚｒ，Ｍｏ，Ｗ，Ｖ灵敏度可达（１－３）×１０＾－４％。测定的相对标准偏差为９％－２７％。     

Determination of impurities in highly pure platinum by inductively coupled plasma-atomic emission spectrometry

In this work, a cyclone spray chamber system is used in conjunction with an inductively coupled plasma-atomic emission spectrometer instead of the conventional Scott-type chamber system to reduce the lower limit of detection achieved by the instrument, and an internal standard element (Y) is introduced to eliminate the effects caused by the drift in the plasma background level. An ICP-AES method for the determination of 13 impurity elements in a highly pure platinum sample has been developed. In this method, it is not necessary either to add a platinum matrix to the calibration standard or to separate and concentrate the elements to be determined in the samples. The effect of the platinum matrix on the elements to be analyzed is corrected for by a background equivalent concentration subtraction method. The determination ranges of the method are as follows: 0.00010-0.0050% for Mg, Mn, Cu, Ag, Fe and Zn; 0.00030-0.015% for Au, Ir, Ni and Pb; 0.00050-0.025% for Rh and Al; and 0.00080-0.040% for Pd. The method is simple, rapid and accurate, and can be applied to the analysis of 99.9–99.995% pure platinum.     

Physicochemical aspects of microbial adhesion — Influence of antibody adsorption on the deposition ofStreptococcus sobrinus in a parallel-plate flow chamber

Deposition of the oral bacteriumStreptococcus sobrinus HG977 onto glass (water contact angle 0°) and onto FEP-Teflon (fluoroethylenepropylene; water contact angle 110°) was studied in a parallel-plate flow chamber in the presence and absence of polyclonal antibodies (pAb) and monoclonal antibodies (mAbs) adsorbed onto the cells. The zeta potentials of the bacteria ranged from −7.1 to −8.5 mV at pH 6.8 and were not affected by the presence of pAb or mAbs. Hydrophobicity (by water contact angles) increased from 30° (no antibodies) to 88° in the presence of pAb adsorbed onto the bacterial cell surface. The untreatedS. sobrinus had a greater tendency to adhere to glass (44.5 × 10⁶ cm⁻²) than to FEP-Teflon (18.3 × 10⁶ cm⁻²), in accordance with thermodynamic modelling. After preincubation ofS. sobrinus with pAb, its clear preference for adhesion to glass disappeared as expected from its increased hydrophobicity. Although forS. sobrinus preincubated with OMVU10 no difference was found in hydrophobicity in comparison to the untreated bacteria, the number of bacteria adhering to glass decreased to 10.2 ¢ 10⁶ cm⁻². Formation of bacterial aggregates was found whenS. sobrinus, preincubated with pAb or OMVU10, adhered to glass and FEP. This was also observed when untreated bacteria adhered to glass coated with OMVU10, or to FEP coaled with OMVU10 or pAb. Adhesion in these experiments is therefore thought to occur via near-neighbour collection induced by the presence of pAb or mAbs. Low numbers of bacteria were removed from glass after draining the flow cell, whereas high numbers of untreated bacteria and bacteria preincubated with OMVU10 were removed from FEP.S. sobrinus cells preincubated with pAb were not removed but piled up. It was concluded that the adhesion of untreatedS. sobrinus andS. sobrinus preincubated with pAb is in accordance with thermodynamic modelling, based on the overall wettability of the cell surfaces, whereas the adhesion ofS. sobrinus preincubated with OMVU10 may be through localized interactions, not expressed in overall surface properties.     

The Organic Particulate Thermal Analysis (OPTA) of Amine Arenesulfonates,Malonic Acids,and Metal Acetylacetonates

Abstract

The new technique of organoparticulate thermal analysis (OPTA) has been used to investigate the thermal decomposition reactions of various types of organic compounds (i.e., malonic acids, metal acetylacetonates, arenesulfonic acids and their amine salts). With a few exceptions, most of the compounds in these classes exhibit strong organoparticulation characteristics at temperatures below 200°C as indicated by their influence on the output current of an ion chamber detector.

In general, no direct correlation between the melting and decomposition temperatures and their organoparticulation temperature ranges (OPTR) was evident. In several instances, the OPTR values lay well above or well beneath the known melting point and decomposition temperatures of the compounds.

To explain the organoparticulating properties of these compounds, vapor phase association of polar molecules (such as amines, carboxylic acids, etc.) would appear to be necessary to give organoparticulate sizes detectable with the present instrumentation. Alternatively, the formation of an “aerosol” suspension of organic molecules in gases, such as SO₂, CO₂, might be occurring with some of these compounds     

A new approach for the sequential injection spectrophotometric determination of the total antioxidant activity

A sequential injection system based on the ABTS (2,2′-azino-bis-(3-ethylbenzothiazoline-6-sulphonic-acid) methodology was developed. The proposed method, incorporating a mixing chamber in the side port of the selection valve, was evaluated to measure the total antioxidant activity of several beverages and foods.The ABTS⁺ is generated by oxidation of ABTS with potassium persulfate and is reduced in presence of hydrogen-donating antioxidants converting into a colourless product. The applicability of the developed method was tested by measurement of the antioxidant activity of pure compounds as well as by analysing complex food and beverage samples. The antioxidant activity was presented as l(+) ascorbic acid equivalence. The values obtained by this methodology were not significantly different from the results obtained by the original spectrophotometric ABTS assay. For most of the studied antioxidants, antioxidant activity varied with pH and dilution. The proposed SIA system is suitable for screening direct or diluted total antioxidant activity of pure compounds or food samples.     

Inhibition of Salidroside on Salivary Gland Adenoid Cystic Carcinoma

To evaluate the role of salidroside on proliferation,apoptosis and invasiveness of salivary gland adenoid cystic carcinoma cells(SACC),immunocytochemical staining was employed to detect proliferating cell nuclear antigen(PCNA),caspase 3 and caspase 8 expression in SACC-2 cells.Modified Boyden chamber assay combined with laser confocal microscopy(LSCM) was used to evaluate the invasion and migration abilities of SACC-2 cells at different time point.Immunohistochemistry staining revealed that the expression of PCNA was significantly decreased(P0.01) after salidroside treatment.In contrast,salidroside treatment led to increased caspase 3 and caspase 8 in SACC-2 cells.Cell migration depth and number of cells that penetrated Boyden chamber were also decreased by salidroside.Salidroside potently inhibits the proliferation and simultaneously induces the apoptosis of SACC-2 cells.Migration and invasion of SACC-2 cells are also inhibited.Our data throw light on potential clinical application of salidroside to the patients with SACC.     

LC–MS/MS determination and interaction of the main components from the traditional Chinese drug pair Danshen–Sanqi based on rat intestinal absorption

The Chinese drug pair Danshen (Salvia miltiorrhiza)–Sanqi (Panax ginseng) has been widely used for centuries treating various cardiovascular disorders, among which salvianlic acid B (SAB), ginsenoside Rg₁ (GRg₁), ginsenoside Rb₁ (GRb₁) and notoginsenoside R₁ (NGR₁) were identified as the major components. The present study focused on the interaction between these components based on investigating their intestinal absorption using the Ussing chamber technique. The concentrations of SAB, GRg₁, GRb1 and NGR₁ in the intestinal perfusate were determined by LC–MS/MS method, followed by Q (accumulative quantity) and P_app (apparent permeability). The results showed that all these four main components displayed very low permeabilities, which implied their poor absorption in the rat intestine. The intestinal absorption level of SAB displayed regioselectivity: duodenum < jejunum < ileum. However, there was no significant difference in the absorption of GRg₁ and GRb₁ in the different segments. The Q and P_app values of the four main components were obviously increased in jejunum when co‐administrating Danshen extract with Sanqi extract. In conclusion, compatibility of Danshen and Sanqi could remarkably improve the intestinal absorption level of the main components in the pair. To some extent, this might explain the nature of the compatibility mechanisms of composite formulae in TCMs.     

Laboratory simulation of Hg<Superscript>0</Superscript> emissions from a snowpack

Snow surfaces play an important role in the biogeochemical cycle of mercury in high-latitude regions. Snowpacks act both as sources and sinks for gaseous compounds. Surprisingly, the roles of each environmental parameter that can govern the air–surface exchange over snow are not well understood owing to the lack of systematic studies. A laboratory system called the laboratory flux measurement system was used to study the emission of gaseous elemental mercury from a natural snowpack under controlled conditions. The first results from three snowpacks originating from alpine, urban and polar areas are presented. Consistent with observations in the field, we were able to reproduce gaseous mercury emissions and showed that they are mainly driven by solar radiation and especially UV-B radiation. From these laboratory experiments, we derived kinetic constants which show that divalent mercury can have a short natural lifetime of about 4–6 h in snow.     

Studying dispersoid systems

Summary Measurements of energy transformation in mitochondria are done on a capillary differential titration calorimeter CTD2156. It is important to mention that a sediment is quickly formed by the mitochondria suspension without mixing by means of a vibrating needle. During the measurements, the vibrating needle is located inside the working volume of the chamber. The design of the calorimeter is substantiated theoretically. It provides a new mode of a reagent input in the measuring volume of the calorimetric chambers. It expands the spectrum of tasks that can be solved using this instrument. In the capillary calorimeter the calorimetric chambers unit is simple and small in size. These advantages of capillary chambers provide an opportunity to unite 20 capillary calorimetric chambers in one calorimetric block. It allows designing a multi-channel titration calorimeter. There are obvious advantages of such a calorimeter over other instruments in screening researches and in researches of objects maintaining stability only for a short time.     

Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative ζ potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces.