Influence of the variable wall thickness of the sample tubes and a quartz Dewar on the EPR signal intensity in a single TE102 and double TE104 rectangular cavity

The response of a single TE₁₀₂ and double TE₁₀₄ rectangular cavity to the insertion of samples contained in tubes with variable wall thickness and a quartz Dewar into the cavity has been analyzed. A direct, indirect, and concurrent (positive or negative) “lens effect” inside the double TE₁₀₄ rectangular cavity is discussed. The experimental dependence of the EPR signal intensity on the wall thickness of the sample tube, δ, for the line-like samples with identical length of the sample material column, L=30 mm, recorded in the microwave cavity showed a directly proportional increase of the relative “lens effect” with the increase of the wall thickness of the tube in the interval, δ∈<0.1 mm, >0.5 mm. The insertion of the variable-temperature double-wall quartz Dewar (home-built, resonant frequency shift, ca. −300 MHz) into the single TE₁₀₂ rectangular cavity showed the same relative “lens effect”, with ca. 1.5-time increase of the EPR signal intensity, for a point-like sample and the line-like samples with material columns of diameter of 1 and 1.3 mm, and wall thickness of the sample tubes, δ∈<0.1 mm, >0.5 mm. The increased effect of the Dewar arises because the active volume of the quartz Dewar tube walls is always much more larger than the active volume of the sample tube wall. In the case of the double TE₁₀₄ rectangular cavity, the insertion of the quartz Dewar: (i) into the same cavity, in which the sample is present, caused a direct “lens effect”, with ca. 1.8-fold increase of the EPR signal intensity; however, (ii) into the complementary cavity, in which the sample is absent, caused an indirect “lens effect”, with ca. 0.6-fold decrease of the EPR signal intensity. With the Dewar and sample in one cavity and a large empty sample tube in the complementary cavity, a concurrent (positive or negative) “lens effect” can be observed. Thus, the possible increase/decrease of the EPR signal intensity depends on the volume ratio of the quartz Dewar tube walls and large sample tube wall inserted into the double TE₁₀₄ rectangular cavity. Each of the above phenomena may be a significant source error in quantitative EPR spectrometry unless the samples to be compared in the quantitative EPR analysis are contained in sample tubes having the same wall thickness and each EPR spectra should be recorded inside an identical quartz Dewar.     

腔长失调对光腔衰荡法测量精度的影响

 只考虑腔长失调因素下建立了反射率模拟测量的理论模型。根据高斯光束传输规律分析了腔长失调对衰荡腔模式耦合的影响，推导了腔长失调与谐振腔输出脉冲信号、衰荡信号与反射率之间的关系，模拟了腔长失调在±10mm范围内的光脉冲衰荡现象。结果表明：对于光敏面直径为0.2mm的高速探测器，为了保证10^-6的测量精度，腔长的失调量应控制在±1mm之间。在光路调节中采用具有对数变换功能的示波器和动态范围较大的探测器，可以提高测量精度。     

回旋速调管放大器输出腔的特性研究

 利用变截面波导的耦合模理论，根据输出腔中电场幅值分布函数所满足的微分方程组，编写了具有自动优化功能的计算程序，分析研究了不同渐变角度、考虑腔体损耗前后和输出腔与外电路失配时，谐振频率、腔体品质因数和高频场幅值沿轴分布的变化情况，为进一步研究高频场与电子注的互作用和输出腔奠定了基础。     

空间摄像机的热设计

根据空间摄像机的所处空间环境和结构特点,对其进行了热设计.采用被动热控措施进行热隔离和热疏导,充分利用了摄像机所搭载的卫星平台的热容;采用主动热控措施进行温差补偿,将温度拉平至热控指标范围之内.根据所采用的热控措施,针对空间摄像机进行了仿真分析,得到了满意的结果.     

Computation of Entropy Production in Stratified Flames Based on Chemistry Tabulation and an Eulerian Transported Probability Density Function Approach

This contribution presents a straightforward strategy to investigate the entropy production in stratified premixed flames. The modeling approach is grounded on a chemistry tabulation strategy, large eddy simulation, and the Eulerian stochastic field method. This enables a combination of a detailed representation of the chemistry with an advanced model for the turbulence chemistry interaction, which is crucial to compute the various sources of exergy losses in combustion systems. First, using detailed reaction kinetic reference simulations in a simplified laminar stratified premixed flame, it is demonstrated that the tabulated chemistry is a suitable approach to compute the various sources of irreversibilities. Thereafter, the effects of the operating conditions on the entropy production are investigated. For this purpose, two operating conditions of the Darmstadt stratified burner with varying levels of shear have been considered. The investigations reveal that the contribution to the entropy production through mixing emerging from the chemical reaction is much larger than the one caused by the stratification. Moreover, it is shown that a stronger shear, realized through a larger Reynolds number, yields higher entropy production through heat, mixing and viscous dissipation and reduces the share by chemical reaction to the total entropy generated.     

Quantum Teleportation via Hybrid Entangled States

In this paper, we study quantum teleportation of atomic states via a hybrid entangled state (HES) involving an atom and a cavity field. And we investigate how to implement controlled phase (CP) gates between atomic internal Finally, a brief discussion about the feasibility of this scheme in experiment is presented.     

Cyclic Heating-Annealing and Boltzmann Distribution of Free Energies in a Spin-Glass System

Ergodicity of a spin-glass is broken at low temperatures; the system is trapped in one of many ergodic configurational domains. Transitions between different ergodic domains are achievable through a heating-annealing procedure. If this experiment is repeated infinite times, all ergodic configurational domains will be visited with frequences that decreasing exponentially with their free energies. The mean free energy density of a spin-glass system on a random graph is calculated based on this free energy Boltzmann distribution in the present work, by means of the cavity approach.     

A Position-Dependent Two-Atom Entanglement in Real-Time Cavity QED System

We study a special two-atom entanglement case in assumed cavity QED experiment in which only one atom effectively exchanges a single photon with a cavity mode. We compute two-atom entanglement under position-dependent atomic resonant dipole-dipole interaction （RDDI） for large interatomic separation limit. We show that the RDDI, even t, hat which is much smaller than the maximal atomic Rabi frequency, can induce distinct diatom entanglement. The peak entanglement reaches a maximum when RDDI strength can compare with the Rabi frequency of an atom.     

Approximate and Conditional Teleportation of an Unknown Atomic State Without Bell-State Measurement with Two-Photon Interaction

A scheme for approximately and conditionally teleporting an unknown atomic state via two-photon interaction in cavity QED is proposed. It is the extension of the scheme of Ref. [11] [Phys. Rev. A 69 (2004) 064302], which is based on Jaynes-Cummings model in QED and where only a time point of system evolution and the corresponding fidelity implementing the teleportation are given. In our scheme, the two-photon interaction Jaynes-Cummings model is used to realize the approximate and conditional teleportation. Our scheme does not involve the Bell-state measurement and an additional atom, only requiring two atoms and one single-mode cavity. The fidelity of the scheme is higher than that of Ref. [11]. The scheme may be generalized to not only the teleportation of the state of a cavity mode to another mode by means of a single atom but also the teleportation of the state of a trapped ion.     

双间隙输出腔开放腔的高频特性分析

 建立了S波段相对论速调管放大器双间隙输出腔开放腔的3维模型。采用时域有限差分法,通过监测激励电流源的响应计算了该双间隙输出腔的谐振频率、有载Q值、场分布以及特性阻抗,并分析了腔体结构尺寸对谐振频率、有载Q值和特性阻抗的影响。研究表明：腔体半径对开放腔的谐振频率影响很大,耦合孔尺寸对腔体谐振频率的影响较小;随着耦合孔张角增加,有载Q值逐渐减小;随着腔体半径增大、间隙的减小,腔体特性阻抗降低。研究结果可为S波段强流相对论速调管放大器双间隙输出腔的设计提供理论依据。