Experience Gained Using Second-Moment Closure Modeling for Transitional Flows Due to Boundary Layer Separation

This paper presents detailed information on the experience gained during the attempts to model a set of transitional flows due to boundary layer separation. These flows are developed on a flat plate with a semi-circular leading edge and they have been coded by the ERCOFTAC Special Interest Group on Transition, as T3L flows. Different freestream velocities and turbulence intensities configure these transitional flows and, by consequence, govern the transition mechanism, resulting in larger or smaller transitional regions. The modeling of the T3L flows has been performed by adopting a low-Reynolds number second-moment closure turbulence model. The results showed satisfactory agreement with the experimental measurements, although some difficulties regarding successful convergence have been faced. The final conclusion is that turbulence modeling can present quite accurate results for transitional flows without any additional use of ad-hoc modifications or additional equations based on various transition models and intermittency transport modeling.     

On estimating pressure build-up in severely accelerated,shocked flow

A new approach to the calculation of the high pressures characterizing the flow field in front of a piston undergoing severe acceleration over the short term is presented. In contrast with previous approaches where the computational domain is altered but which stop short of transforming velocities, here the problem is solved in an accelerating non-Euclidean co-ordinate system where the piston is stationary. The method is applied to a study of the problem of premature sabot separation. Through use of Harten's second-order-accurate TVD scheme, flow simulations are performed for both 1D and 3D axisymmetric geometries. The simple 1D model gives pressure profiles surprisingly close to those of the more physical 3D model.     

Modeling of drug molecule orientation within a receptor cavity in the BiS algorithm framework

The BiS algorithm is suggested for modeling the drug molecule orientation within a receptor cavity. It is based on the assumption of complementarity of the field created by biologically active compounds and the field of the responsive receptor. The comparison of predicted orientations of various biologically active compounds on the relevant receptors with the data of X-ray structural studies (Protein Data Bank) reveals that the results obtained with this approach surpasses those reported in the literature. The suggested technique made it possible to elucidate the details of the action mechanism of DNA antimetabolites, dihydrofolate reductase inhibitors. The dependence of the activity on the structural parameters of “ligand-receptor” complexes is determined.     

Physical properties and phase separation structure of Antheraea pernyi/Bombyx mori silk fibroin blend films

The physical structure and compatibility of solution-cast Antheraea pernyi/Bombyx mori silk fibroin blend films were stuided by differential scanning calorimetry (DSC), thermomechanical (TMA) and thermogravimetric (TGA) analysis, dynamic viscoelastic measurement, infrared spectroscopy, and x-ray diffractometry. The DSC curves of the blend films showed independent endotherms at 280 and 358°C, corresponding to the thermal decomposition of B. mori and A. pernyi silk fibroins with random coil conformation. The intensity was roughly proportionate to the amount of each component in the blend. The thermal behavior corresponding to the conformational transitions induced by heating on A. pernyi and B. mori silk fibroins overlapped in the temperature range 190–230°C. Thermal expansion and contraction properties, as well as weight retention behavior of the blend films were intermediate between the pure components, as shown by the TMA and TGA curves. The onset temperature of the storage modulus curve decreased markedly, approaching that of B. mori silk fibroin film when the amount of this component in the blend increased. The loss modulus curve of the blend films showed two peaks at ca. 190 and 210°C, the former corresponding to B. mori, and the latter to A. pernyi silk fibroin. Infrared spectra of the blends exhibited absorption bands characteristic of the pure components overlapping in the spectral region 2000–400 cm^?1. The x-ray diffraction peaks at 23 and 21.5°, attributed to the crystalline spacings of A. pernyi and B. mori fibroins, respectively, overlapped in the diffraction curves of the blends, while the peak at 11.4°, of A. pernyi, increased as the content of this fibroin in the blend increased. The degree of crystallinity, calculated from the x-ray diffraction curves, diminished as the amount of B. mori silk fibroin decreased. A low degree of compatibility exists between the two fibroins when they are cast from aqueous solution in the experimental conditions adopted in this work. © 1994 John Wiley & Sons, Inc.     

动态模糊随机信息处理的数学方法

本文系统地概述了我们近年来提出的动态模糊随机信息处理的数学方法,内容包括模糊随机变量、模糊随机过程和模糊随机微分方程的基本解法等方面的基本概念、基本定义和某些重要的定理,以及动态系统的模糊随机响应与可靠性分析的方法等。这些方法是为我们研究工程实际问题的需要逐步发展起来的,对于处理某些类型的问题简便实用。     

中能区光学势的温度效应

本文在Skyr}e相互作用、核物质近似和自洽半经典方法的基础上，将微观光学势的自洽研究推J“到中能区(60-r300MeV)，研究了”+907r在该能区光学势的径向形状和温度效应     

蒙特卡罗哈密顿新方案及其检验

蒙特卡罗哈密顿方法(MCH)是研究量子理论的数值模拟新方法, 其优点是可求出超出基态的能谱和波函数. 旧MCH方案需要自由粒子的信息, 较难推广应用于格点规范理论. 本文提出克服这个困难的新方案. 首先介绍这一方案的思想, 并以1维量子力学模型V(x)=μ²x²+λx⁴(其中μ²< 0,λ>0)为例说明实现这一新方案的具体计算步骤和方法.     

The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

Propagator matrices as matrices of power''s series. II. It''s relationship with HF''s stability problem and alternative solutions

Some non-singlet quasi-instabilities (QIs) cases that arise in the calculation of NMR-J parameters are analyzed within response theory. The relationship between ‘very close to zero’ eigenvalues of the principal propagator and the rate of convergency for specific coupling pathways is shown by a power series implemented to calculate the principal propagator matrix. A natural criterion for the analysis of the stability problem emerges from that series. This is more general and accurate compared with previous proposals. Its relationship with π-type molecular orbitals is given. We present an alternative scheme to minimize the effects of non-singlet QIs in such a way that the NMR-J parameters become close to the best theoretical calculations for H₂CX (X=CH₂, NH and O).     

Schwinger Formula Revisited

We apply the formal W.K.B. method in the complex plane to the quantum field theory to obtain the Schwinger formula for spin and spinless particles; i.e., we obtain the probability that the vacuum state remains unchanged in presence of a constant electric field. Finally, from Schwinger formula we calculate the probability that n pairs are produced.