气相色谱-负化学源质谱联用法测定菊酯类农药

通过固相萃取-气相色谱-负化学离子源质谱技术建立了11种拟除虫菊酯类农药残留的检测方法，并应用于茶叶农残检测。样品经乙酸乙酯提取后，用串联的活性炭和中性氧化铝固相萃取柱选择性地富集茶叶中待测组分，再由气相色谱-负化学离子源质谱分时段选择离子监测技术进行测定。方法简单快速，一次进样就能得到11种菊酯残留结果；准确度和精密度高，在0．016μg／kg、0．032μg／kg和0．064μg／kg3个添加水平下的回收率在70％～110％之间，CV≤7．4％；选择性好，消除了色素和其它杂质干扰；灵敏度高，检出限低，除了氯菊酯为10μg／kg外，其它菊酯检出限都在μg/∥kg级，七氟菊酯则达到了0．02μg／kg。     

稀土-二安替匹啉甲烷-I~--CHCl_3选择性萃取铁镍合金中稀土元素及其测定

本文提出用CHCl_3选择性萃取稀土-二安替匹啉甲烷-I~三元络合物的方法,从铁、镍合金中分离微量稀土元素,借偶氮胂Ⅲ光度测定。本文较为详细地研究了稀土三元络合物的定量萃取条件及Cu(Ⅱ).W(Ⅵ)对萃取的影响等。在确定的最佳分离及测定条件下,大多数金属离子不干扰测定。方法的测定下限为0.001%RE,相对标准偏差小于8.0%。     

溶剂萃取法制备Co(PO_3)_2超细微粉

本文用溶剂萃取法成功地制备了偏磷酸钴超细微粉并通过ＸＲＤ，ＩＲ，ＴＧ，ＤＴＡ，ＴＥＭ等实验对超细微粉的组成、结构进行了表征。     

Synthesis and amino acid extraction abilities of chiral calix[4]arene triamides containing amino alcohol units

Herein the synthesis and extraction abilities of new d-/l-phenylalaninol substituted p-tert-butylcalix[4]arene triamide derivatives (3 and 4) towards amino acids are reported. These compounds (3 and 4) have been easily synthesized via aminolysis of p-tert-butylcalix[4]arene trimethylester (2) with d-/l-phenylalaninol in methanol-toluen solvent system at one step. The extraction properties of the prepared chiral calix[4]arene triamide derivatives (3 and 4) towards some selected amino acid methylesters are studied by liquid–liquid extraction. Results show that these chiral calix[4]arene triamide derivatives (3 and 4) exhibited a good affinity towards all amino acid species without any remarkably discrimination.     

Predicting the performance of molecularly imprinted polymers: Selective extraction of caffeine by molecularly imprinted solid phase extraction

A rational design approach was taken to the planning and synthesis of a molecularly imprinted polymer capable of extracting caffeine (the template molecule) from a standard solution of caffeine and further from a food sample containing caffeine. Data from NMR titration experiments in conjunction with a molecular modelling approach was used in predicting the relative ratios of template to functional monomer and furthermore determined both the choice of solvent (porogen) and the amount used for the study. In addition the molecular modelling program yielded information regarding the thermodynamic stability of the pre-polymerisation complex. Post-polymerisation analysis of the polymer itself by analysis of the pore size distribution by BET yielded significant information regarding the nature of the size and distribution of the pores within the polymer matrix. Here is proposed a stepwise procedure for the development and testing of a molecularly imprinted polymer using a well-studied compound—caffeine as a model system. It is shown that both the physical characteristics of a molecularly imprinted polymer (MIP) and the analysis of the pre-polymerisation complex can yield vital information, which can predict how well a given MIP will perform.     

Comparison of Different Sorbents for Solid-Phase Extraction of Phenoxyalkanoic Acid Herbicides

An HPLC procedure for determination of phenoxyalkanoic acid herbicides in water samples is proposed. The analytical column Phenomenex C18(2) Luna 5 µm and UV detection at 225 nm were applied. Baseline resolution was achieved in isocratic mode with a mobile phase consisting of acetonitrile/acetic acid (40/60, v/v), adjusted to pH 2.5. SPE sorbents – C₁₈ BondElut, phenyl-silica, LiChrolut SAX and polymeric sorbents – were compared for isolation and preconcentration of 6 phenoxyalkanoic acid herbicides. Higher (above 95%) and more reproducible recoveries were obtained with polymeric and phenyl-silica sorbents using pure methanol for elution. The method was tested for river water samples with the limit of detection in the range of 2–3 µg L⁻¹ (for 50 mL sample) and a reproducibility of 5% RSD.     

Development and validation of a capillary electrophoresis method for the determination of phenothiazines in human urine in the low nanogram per milliliter concentration range using field-amplified sample injection

A capillary zone electrophoresis (CZE) method with ultraviolet-visible detection has been established and validated for the determination of five phenothiazines: thiazinamium methylsulfate, promazine hydrochloride, chlorpromazine hydrochloride, thioridazine hydrochloride, and promethazine hydrochloride in human urine. Optimum separation was obtained on a 64.5 cm x 75 microm bubble cell capillary using a buffer containing 150 mM tris(hydroxymethyl)aminomethane and 25% acetonitrile at pH 8.2, with temperature and voltage of 25 degrees C and 20 kV, respectively. Naphazoline hydrochloride was used as an internal standard. Field-amplified sample injection (FASI) has been applied to improve the sensitivity of the detection. Considering the influence of parameters affecting the on-line preconcentration (nature of preinjection plug, sample solvent composition, injection times, and injection voltage) and due to the significant interactions among them, in this paper we propose for the first time the application of a multivariate approach to carry out the study. The optimized conditions were as follows: preinjection plug of water for 7 s at 50 mbar, electrokinetic injection for 40 s at 6.2 kV, and 32 microm of H3PO4 in the sample solvent. Also, a solid-phase extraction (SPE) procedure is developed to obtain low detection limits and an adequate selectivity for urine samples. The combination of SPE and FASI-CZE-UV allows adequate linearities and recoveries, low detection limits (from 2 to 5 ng/mL), and satisfactory precisions (3.0-7.2% for an intermediate RSD %).     

Simple route to secondary amides of phosphorylacetic acids and their use for extraction and sorption of actinides from nitric acid solutions

An efficient method for the synthesis of secondary alkylamides of phosphorylacetic acids (APA) was proposed. The method involves amidation of ethyl phosphorylacetates with primary aliphatic amines. The scope of reaction was determined. Reactions with ethylenediamine and 1,4-diaminobutane yield the corresponding bisamides; in the case of 1,3-diaminopropane, N-(3-aminopropyl)diphenylphosphorylacetamide or N,N-propylenebis(diphenylphosphorylacetamide) was obtained, depending on the reaction conditions. The extraction of americium(III) complexes and the sorption of uranium(VI) by sorbents with physically sorbed APA from nitric acid solutions were studied. There is no correlation between the partition coefficient of americium(III) and the structure of APA; in the sorption of uranium(VI), the degree of extraction depends on the complexone structure.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2394–2402, November, 2004.     

Development of an analytical procedure for determination of selected estrogens and progestagens in water samples

An analytical procedure has been developed for determination of eight selected natural and synthetic hormonal steroids in surface water and in effluent samples. Several methodological points have been investigated and are discussed; they include the choice of the solid-phase extraction sorbent, the influence of flow rate on recovery, the breakthrough volume for a given sorbent (Env+ and Oasis HLB), sample clean up, and sample storage. As regards the latter point, it was found that when no preservative was added to effluent from a sewage-treatment plant, severe loss of steroids occurred—85% of progesterone and about 30% of both estrone and estradiol were found to be degraded in 24 h. The procedure developed was applied to samples from the Seine river estuary. Sex steroids were not detected in surface water; estrone was the most commonly detected steroid in sewage-treatment plant effluent, with levels ranging from 1.8 to 8.3 ng L^–1. Synthetic estrogens (ethynylestradiol and mestranol) and progestagens (levonorgestrel and norethindrone) were never detected, whatever the sampling season. Overall, for 162 out of 168 measurements levels were below the detection limits of the developed procedure.