On locating low altitude moving targets using a planar acoustic sensor array

It is of engineering importance to locate low altitude moving targets with acoustic methods due to the blindness of the traditional radar detecting. In this paper, an algorithm for locating low altitude moving targets is put forward based on a five-element planar acoustic sensor array. The method is realized through estimations of the sensor-to-sensor time delays of the source signal generated by the low altitude moving target. The angle and range estimation performance of the proposed method are analyzed, respectively, both in theoretical and numerical sense.     

Transient vibrations of a tau inclined cable with a riding accelerating mass

The objective of this paper is a theoretical and numerical study of the dynamics of a taut inclined cable with a riding accolerating mass, which is suspended from two points of different elevation. The moving mass is a trolley that is accelerated by a solid fuel rocket down the inclined cable and is aerodynamically brought to a halt. The thrust of the rocket is tangential to the deformed configuration of the cable.Methods of analysis consist of the dynamics of small deformations superimposed on the static catenary state. The problem is nonlinear due to presence of friction and the convective acceleration interaction of the moving mass and the cable. Galerkin's procedure for removal of spatial dependence and numerical integration are used to obtain convergent solutions.Deceased     

Markovian network processes: Congestion-dependent routing and processing

A Markovian network process describes the movement of discrete units among a set of nodes that process the units. There is considerable knowledge of such networks, often called queueing networks, in which the nodes operate independently and the routes of the units are independent. The focus of this study, in contrast, is on networks with dependent nodes and routings. Examples of dependencies are parallel processing across several nodes, blocking of transitions because of capacity constraints on nodes, alternate routing of units to avoid congestion, and accelerating or decelerating the processing rate at a node depending on downstream congestion. We introduce a general network process representing the numbers of units at the nodes and derive its equilibrium distribution. This distribution takes the form of a product of functions of vectors in which the arguments of the functions satisfy an interchangeability property. This new type of distribution may apply to other multi-variate processes as well. A basic idea in our approach is a linking of certain micro-level balance properties of the network routing to the processing rates at the nodes. The link is via routing-balance partitions of nodes that are inherent in any network. A byproduct of this approach is a general characterization of blocking of transitions without the restriction that the process is reversible, which had been a standard assumption. We also give necessary and sufficient conditions under which a unit moving in the network sees a time average for the unmoved units (called the MUSTA property). Finally, we discuss when certain flows between nodes in an open network are Poisson processes.This research was sponsored in part by Air Force Office of Scientific Research contract 84-0367.     

Spectral regions selection to improve prediction ability of PLS models by changeable size moving window partial least squares and searching combination moving window partial least squares

Changeable size moving window partial least squares (CSMWPLS) and searching combination moving window partial least squares (SCMWPLS) are proposed to search for an optimized spectral interval and an optimized combination of spectral regions from informative regions obtained by a previously proposed spectral interval selection method, moving window partial least squares (MWPLSR) [Anal. Chem. 74 (2002) 3555]. The utilization of informative regions aims to construct better PLS models than those based on the whole spectral points. The purpose of CSMWPLS and SCMWPLS is to optimize the informative regions and their combination to further improve the prediction ability of the PLS models. The results of their application to an open-path (OP)/FT-IR spectra data set show that the proposed methods, especially SCMWPLS can find out an optimized combination, with which one can improve, often significantly, the performance of the corresponding PLS model, in terms of low prediction error, root mean square error of prediction (RMSEP) with the reasonable latent variable (LVs) number, comparing with the results obtained using whole spectra or direct combination of informative regions for a compound. Regions consisting of the combinations obtained can easily be explained by the existence of IR absorption bands in those spectral regions.     

曲率流的参数化有限元逼近

许多物理现象可以在数学上描述为受曲率驱动的自由界面运动,例如薄膜和泡沫的演变、晶体生长,等等.这些薄膜和界面的运动常依赖于其表面曲率,从而可以用相应的曲率流来描述,其相关自由界面问题的数值计算和误差分析一直是计算数学领域中的难点.参数化有限元法是曲率流的一类有效计算方法,已经能够成功模拟一些曲面在几类基本的曲率流下的演化过程.本文重点讨论曲率流的参数化有限元逼近,它的产生、发展和当前的一些挑战.     

曲边区域上的多边形网格间断有限元离散及其多重网格算法

本文利用多边形网格上的间断有限元方法离散二阶椭圆方程,在曲边区域上,采用多条直短边逼近曲边的以直代曲的策略,实现了高阶元在能量范数下的最优收敛.本文还将这一方法用于带曲边界面问题的求解,同样得到高阶元的最优收敛.此外我们还设计并分析了这一方法的\linebreakW-cycle和Variable V-cycle多重网格预条件方法,证明当光滑次数足够多时,多重网格预条件算法一致收敛.最后给出了数值算例,证实该算法的可行性并验证了理论分析的结果.     

可调移动重叠分离图法用于高效液相色谱多台阶梯度分离条件优化的研究

计算机辅助高效液相色谱（HPLC）分离条件优化可以低成本、快速地得到优化的分离条,因而已较为广泛地用于复杂样品的分离分析。基于移动重叠分离图方法,又发展了一种新型的多台阶梯度分离条件的优化方法可调移动重叠分离图法。该方法通过预测不同流动相条件下各组分的保留时间、峰宽和分离度,绘制出对于样品中各组分的重叠分离区域图。在对当前台阶流动相组成进行优化的同时,考虑其对后面一到两个台阶上流出组分保留的影响,实时地重新绘制对于后面台阶上流出组分的重叠分离区域图。通过观察当前台阶流动相条件对当前台阶和后面台阶上流出组分分离的影响,综合考虑样品中所有组分的分离情况,找到更接近全局最优的分离条件。通过扫描的方法对优化得到的分离条件进行微调,能够进一步提高分离效果。采用文献数据对可调移动重叠分离图法的应用加以说明,在二元流动相体系下,证明了该方法在HPLC方法建立方面的优越性。     

Optimizing control of simulated moving beds--linear isotherm

A new optimization based adaptive control strategy for simulated moving beds (SMBs) is proposed. A linearized reduced order model, which accounts for the periodic nature of the SMB process, is used for online optimization and control. The manipulated variables are the four inlet flow rates, the outputs are the raffinate and extract concentrations. Concentration measurements at the raffinate and extract outlets are used as the feedback information. The state estimate from the periodic Kalman filter is used for the prediction of the outlet concentrations over a chosen horizon. Predicted outlet concentrations are the basis for the calculation of the optimal input adjustments, which maximize the productivity and minimize the desorbent consumption subject to constraints on product purities. The realization of this concept is discussed and the implementation on a virtual eight column SMB platform is assessed, in the case of binary linear systems. For a whole series of typical plant disturbances it is shown that the proposed approach is effective in minimizing off-spec products and in achieving optimal SMB operation, also in the case where there are significant model uncertainties.     

Three‐dimensional wave impact on a rigid structure using smoothed particle hydrodynamics

Navier–Stokes computations of a wave–structure interaction are performed with the aim of assessing the potential of smoothed particle hydrodynamics to accurately estimate impact loading time history. A three‐dimensional dam‐break flow with a rectangular column located downstream is considered. The net force and impulse exerted on the column is monitored throughout the simulation with the results correlating well with existing experimental data. Initial and boundary conditions and numerical parameters are varied and their effect on the column load investigated. The column load is found to be most sensitive to the choice of boundary treatment. Copyright © 2011 John Wiley & Sons, Ltd.     

An ALE finite element method for a coupled Stefan problem and Navier–Stokes equations with free capillary surface

In this article, an ALE finite element method to simulate the partial melting of a workpiece of metal is presented. The model includes the heat transport in both the solid and liquid part, fluid flow in the liquid phase by the Navier–Stokes equations, tracking of the melt interface solid/liquid by the Stefan condition, treatment of the capillary boundary accounting for surface tension effects and a radiative boundary condition. We show that an accurate treatment of the moving boundaries is crucial to resolve their respective influences on the flow field and thus on the overall energy transport correctly. This is achieved by a mesh‐moving method, which explicitly tracks the phase boundary and makes it possible to use a sharp interface model without singularities in the boundary conditions at the triple junction. A numerical example describing the welding of a thin‐steel wire end by a laser, where all aforementioned effects have to be taken into account, proves the effectiveness of the approach.Copyright © 2012 John Wiley & Sons, Ltd.