Optical Nanocomposite Planar Waveguides Doped with Rare-Earth and Noble Metal Elements

The present paper is focused on multilayer Er³⁺-doped silica-titania planar waveguides, co-doped with silver, which were prepared by spin-coating on silica glass, or buffered single crystal silicon substrates. The single layer thickness (0.4 m) and refractive index (1.60–1.63) were measured by spectroscopic ellipsometry at 715 nm. The thickness of the waveguides (measured by mechanical profilometry) was 1 m and their optical propagation losses were measured at different laser wavelengths (488 nm, 514 nm and 633 nm), exhibiting an approximately Rayleigh-like behavior. The thermal precipitation of silver nanocrystallites was achieved, both in air and under a controlled atmosphere (dry nitrogen) and these were characterized by visible absorption spectroscopy, which clearly showed the development of a plasmon absorption band near 415 nm, by X-ray diffraction (XRD) and Transmission Electron Microscopy (TEM). The Er³⁺ metastable level lifetimes for the emission at ca. 1.54 m were found to be ca. 4–6 ms, for Er³⁺ concentrations varying between 0.2–2.0 mol% (or (0.4–4.4) × 10²⁰ ions/cm³), but no significant variation was observed with the Ag concentration added (up to 2.5 mol%).     

Concentrated reverse micelles in a random graft block copolymer system: structure and in-situ synthesis of silver nanoparticles

The structure and rheological properties of a poly(dimethylsiloxane)-graft-poly(oxyethylene) copolymer at high concentrations in block-selective solvents were studied by small-angle X-ray scattering (SAXS) and rheometry. Analysis of SAXS data indicates that quasispherical, reverse micellar aggregates (with no ordered packing) are present in concentrated solutions of the copolymer in nonpolar solvents, and that upon addition of water, the size of such aggregates increases due to the solubilization inside the micellar cores. The viscosity of concentrated polymer solutions increases exponentially as water is added, and finally, viscoelastic, gel-like behavior is found in the vicinity of the phase separation limit. It was found that small silver nanoparticles with an average diameter of ≈3 nm can be synthesized inside the copolymer aggregates without the need of a reducing agent; namely, particles embedded in a viscoelastic matrix are obtained. The synthesis seems to follow first-order kinetics. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

CdS nanocrystallites sensitized ZnO nanorods with plasmon enhanced photoelectrochemical performance

A sandwiched structure of CdS/Ag/ZnO nanorod photoanode exhibits greatly enhanced photoelectrochemical activity for solar hydrogen generation, due to synergistic effect of CdS nanocrystallites and plasmonic Ag nanoparticles for the enhanced optical absorption and the promoted charge carrier separation.     

Highly efficient approach for characterizing nanometer-sized gold particles by capillary electrophoresis

This paper demonstrates that capillary electrophoresis (CE) can be employed for characterizing the sizes of nanometer-scale gold particles. We characterized the gold nanoparticles by effecting CE separation using a buffer of SDS (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (CAPS; 10 mM) at pH 11.0 and an applied voltage of 18 kV and obtained a linear relationship (R² > 0.99) between electrophoretic mobilities and size for nanoparticles whose diameters fall in the regime from 5.0 ± 0.5 to 41.2 ± 3.3 nm; the relative standard deviations of these electrophoretic mobilities are <0.8%. We evaluated the feasibility of employing these separation conditions for the size characterization by of gold nanoparticle samples that were synthesized by a rapid microwave heating method. We confirmed that this CE method is a valid one for size characterization by comparing the results obtained by CE with those provided by scanning electron microscopy (SEM); a good correlation exists between these two techniques. Our results demonstrate that CE can be employed to accelerate the analysis of the sizes of nanomaterials.     

一种新型的空心镍纳米球的合成

通过以二氧化硅粒子作为模板和金纳米粒子为表面晶种的方法制备了壳厚度可控的镍空心球。采用TEM﹑XRD对二氧化硅/镍复合球和镍空心球进行了表征和研究。结果表明镍纳米壳是由似针状的面心立方的镍纳米粒子构成的，碱溶液处理过程不影响镍纳米壳的形貌。高温处理显示镍空心球具有良好的热稳定性。     

纳米荧光小球标记在蛋白质微阵列检测中的应用研究

研究了不经分离、一次性制备氨基化联吡啶钌掺杂的双层二氧化硅纳米小球的方法。实验证明该纳米小球尺寸均匀,光稳定性、水溶性好,分散稳定。通过简单的偶联反应后,它能有效的和蛋白质结合,结合后的蛋白能保持其生物活性。以此纳米荧光小球为标记物,应用于蛋白质微阵列的定量检测,结果发现其效果明显优于相同条件下以异硫氰酸荧光素(FITC)为标记物的定量结果,检出限可以达到3.5 mg/L。     

Electrochemical determination of dopamine and ascorbic acid at a novel gold nanoparticles distributed poly(4-aminothiophenol) modified electrode

A modified electrode is fabricated by embedding gold nanoparticles into a layer of electroactive polymer, poly(4-aminothiophenol) (PAT) on the surface of glassy carbon (GC) electrode. Cyclic voltammetry (CV) is performed to deposit PAT and concomitantly deposit Au nanoparticles. Field emission transmission electron microscopic image of the modified electrode, PAT-Au_nano-ME, indicates the presence of uniformly distributed Au nanoparticles having the sizes of 8-10 nm. Electrochemical behavior of the PAT-Au_nano-ME towards detection of ascorbic acid (AA) and dopamine (DA) is studied using CV. Electrocatalytic determination of DA in the presence of fixed concentration of AA and vice versa, are studied using differential pulse voltammetry (DPV). PAT-Au_nano-ME exhibits two well defined anodic peaks at the potential of 75 and 400 mV for the oxidation of AA and DA, respectively with a potential difference of 325 mV. Further, the simultaneous determination of AA and DA is studied by varying the concentration of AA and DA. PAT-Au_nano-ME exhibits selectivity and sensitivity for the simultaneous determination of AA and DA without fouling by the oxidation products of AA or DA. PAT and Au nanoparticles provide synergic influence on the accurate electrochemical determination of AA or DA from a mixture having any one of the component (AA or DA) in excess. The practical analytical utilities of the PAT-Au_nano-ME are demonstrated by the determination of DA and AA in dopamine hydrochloride injection and human blood serum samples.     

Modification of Escherichia coli single-stranded DNA binding protein with gold nanoparticles for electrochemical detection of DNA hybridization

The unique binding event between Escherichia coli single-stranded DNA binding protein (SSB) and single-stranded oligonucleotides conjugated to gold (Au) nanoparticles is utilized for the electrochemical detection of DNA hybridization. SSB was attached onto a self-assembled monolayer (SAM) of single-stranded oligonucleotide modified Au nanoparticle, and the resulting Au-tagged SSB was used as the hybridization label. Changes in the Au oxidation signal was monitored upon binding of Au tagged SSB to probe and hybrid on the electrode surface. The amplified oxidation signal of Au nanoparticles provided a detection limit of 2.17 pM target DNA, which can be applied to genetic diagnosis applications. This work presented here has important implications with regard to combining a biological binding event between a protein and DNA with a solid transducer and metal nanoparticles.     

Photogeneration of Silver Particles in PVA Fibers and Films

Fibers and films prepared from blends of poly(vinyl alcohol) and poly(acrylic acid) were found to be suitable matrices for the solid-state photoreduction of silver ions in the presence of air. Fast generation of nanometer-sized silver crystallites was observed when fibers of polymer blends crosslinked with dimethyl sulfoxide were irradiated with 350nm light. Optical determinations of the formation kinetics were carried out using thin films of noncrosslinked as well as lightly and heavily crosslinked polymer blends. Small Ag clusters were detected initially, which were stable in the dark but transformed into larger metal particles upon further illumination. Both formation processes occurred only under high light intensity illumination and the kinetic data were inconsistent with monophotonic mechanisms.     

双功能型嵌入镍纳米颗粒的碳棱柱状微米棒电极用于电化学甲醇氧化助力的节能产氢

With the rapid development of human society, clean energy forms are imperative to sustain the normal operations of various mechanical and electrical facilities under a cozy environment. Hydrogen is considered among the most promising clean energy sources for the future. Recently, electrochemical water splitting has been considered as one of the most efficient approaches to harvest hydrogen energy, which generates only non-pollutant water on combustion. However, the sluggish anodic oxygen evolution reaction significantly restricts the efficiency of water splitting and requires a relatively high cell voltage to drive the electrolysis. Therefore, seeking a thermodynamically favorable anodic reaction to replace the sluggish oxygen evolution reaction by utilizing highly active bifunctional electrocatalysts for the anodic reaction and hydrogen evolution are crucial for achieving energy-efficient hydrogen production for industrial applications. Nevertheless, it is known that the oxygen evolution reaction can be replaced with other useful and thermodynamically favorable reactions to reduce the electrolysis voltage for realizing energy-efficient hydrogen production. Therefore, in this study, we present a bifunctional nickel nanoparticle-embedded carbon (Ni@C) prism-like microrod electrocatalyst synthesized via a two-step method involving the synthesis of a precursor metal-organic framework-74 and subsequent carbonization treatment for methanol oxidation and hydrogen evolution. The interfacial structure consisting of a nickel and carbon skeleton was realized via in situ carbonization. However, the dispersed nickel nanoparticles do not easily aggregate owing to the partition by the surrounding carbon as it would sufficiently expose the active Ni sites to the electrolytes, ensuring fast charge transfer between the catalyst and electrolytes by accelerating the electrochemical kinetics. In the anodic methanol oxidation, the products were detected as carbon dioxide and formate with faradaic efficiencies of 36.2% and 62.5%, respectively, at an applied potential of 1.55 V. Meanwhile, the Ni@C microrod catalyst demonstrated high activity and durability (2.7% current decay after 12 h of continuous operation) toward methanol oxidation, which demonstrates that methanol oxidation precedes oxidation under voltage forces. Notably, the bifunctional catalyst not only exhibits excellent performance toward methanol oxidation but also yields a low overpotential of 155 mV to drive 10 mA∙cm⁻² toward hydrogen evolution in 1.0 mol∙L⁻¹ KOH aqueous solution with 0.5 mol∙L⁻¹ methanol at room temperature, which guarantees the hydrogen production efficiency. More importantly, the constructed two-electrode electrolyzer produced a current density of 10 mA∙cm⁻² at a low cell voltage of 1.6 V, which decreased by 240 mV after replacing the oxygen evolution reaction with methanol oxidation.