Characteristics of vinyl iodide microwave plasma etching of GaAs/AlGaAs and InP/InGaAs heterostructures

Vinyl iodide (C₂H₃I) microwave discharges with additions of H₂ and Ar are found to provide faster etch rates than conventional CH₄/H₂/Ar discharges for InP, InGaAs, GaAs, and AlGaAs. This is a result of the relatively high volatilities of indium, gallium, and aluminum iodide species. The etched features are smooth and anisotropic over a wide range of do self-biases (–150 to –350 V), process pressures (1–20mTorr), and microwave powers (150–500 W). The polymer that forms on the mask during the plasma exposure can be readily removed in O₂ discharges. Electron spectroscopy for chemical analysis (ESCA) showed that the etched surfaces are slightly deficient in the group V elements under most conditions, but changes to the optical properties of the semiconductors are minimal. No defects are visible by transmission electron microscopy (TEM) in GaAs or InP samples etched at dc biases –250 V.     

Liquid chromatography of benzene derivatives on a porous methacrylate copolymer containing epoxy groups

Summary The retention of benzene derivatives with nonpolar and polar substituents on a porous methacrylate copolymer containing epoxy groups using both nonpolar and polar eluents was investigated. When n-hexane is used as the eluent, the retention of n-alkylbenzenes and polymethylbenzenes is weaker than that of benzene. In the case of benzene derivatives containing polar functional groups their capacity ratios (k) on this porous polymer increases approximately linearly with the increase of the adsorbate molecules dipole moment. The retention characteristics of the methacrylate copolymer were compared with that of a styrene-divinylbenzene copolymer and silica gels with a hydroxylated surface and with a surface modified by chemically bonded alkylsilyl groups.     

Highly diastereoselective synthesis of new, carbostyril-based type of conformationally-constrained β-phenylserines

We have demonstrated that the readily available amido-keto compounds 5, with prearranged carbonyl and glycine moieties, under strongly basic conditions easily undergo complete and highly diastereoselective cyclization, affording a generalized and practical access to the conformationally constrained phenylserine derivatives 4. High chemical yields, virtually complete diastereoselectivity combined with the operational convenience of the experimental procedures render this method useful for preparation of these diastereomerically pure derivatives.     

Synthesis and Structure Investigations of Potential Sedative and Anticonvulsant Hydroxy- and Acetoxy-N-(3-oxobutyl)-pyrido[2,3-d]pyridazinonesa

Summary.  Novel N-(3-oxobutyl)-hydroxy- and acetoxypyrido[2,3-d]pyridazinones were synthesized and tested in vivo for their sedative and anticonvulsant activity. The Michael-type reaction of quinolinic acid hydrazide and methyl vinyl ketone afforded a mixture of two isomers, 5-hydroxy-N ⁷-(3-oxobutyl)-pyrido[2,3-d]pyridazin-8(7H)-one and 8-hydroxy-N ⁶-(3-oxobutyl)-pyrido[2,3,-d]pyridazin-5-(6H)-one, in a ratio of 2:1 which were separated by crystallization. Subsequent acetylation of both isomers yielded the corresponding 5- and 8-acetoxy compounds. The structures of the compounds were proven and completely assigned on the basis of ¹H, ¹³C, ¹⁵N NMR, and 1D NOE difference spectra as well as 2D C,H-correlation experiments. Preliminary pharmacological tests showed low acute toxicity with a LD ₅₀ > 1000 mg/kg in the mouse and sedative activity for the title compounds. 5-Acetoxy-N ⁷- (3-oxobutyl)-pyrido[2,3-d]pyridazin-8(7H)-one displayed a borderline anticonvulsant activity in the metrazole test model. Corresponding author. E-mail: edith.goessnitzer@uni-graz.at Received March 20, 2002; accepted April 3, 2002     

Selective Formation of Spinel Iron Oxide in Thin Films by Complexing Agent-Assisted Sol-Gel Processing

The structure of iron oxide was controlled by regulating the hydrolytic polymerization of aquo iron complexes with organic polydentate ligands such as diols. Iron oxides were prepared by calcining the precursor polymers obtained from iron nitrate nonahydrate and diols. When the diols were 1,2-pentanediol, 1,2-hexanediol and 1,2-octanediol, α-Fe₂O₃ with corundum structure appeared exclusively or as the main crystalline phase, in spite of the amount of diol used and the calcination temperature. In the case of 1,2-decanediol and 1,2-dodecanediol, when five moles of the diols were used to one mole of iron nitrate and the calcination temperatures were below 400°C, ψ-Fe₂O₃ with spinel structure appeared as the main phase and, when less than five moles of the diols were used, α-Fe₂O₃ appeared exclusively or as the main phase, irrespective of the calcination temperature. This tendency was also observed in thin films. Thus, a transparent magnetic film composed of γ-Fe₂O₃ could be prepared by applying a benzene solution of the iron polymer, obtained with 5 equivalents of 1,2-decanediol, on quartz and calcining the gel film at 350°C.     

A decomposition procedure for the determination of arsenic in marine samples

The use of wet and dry ashing procedures to decompose marine biological tissues and to degrade organoarsenic compounds to inorganic arsenic for analysis by zinc-column arsine generation and atomic-absorption spectrophotometry was investigated. Wet ashing with nitric, sulphuric and perchloric acids (10:2:3 v/v) released the largest percentage of arsenic from fish tissue and quantitatively degraded methylated and other organoarsenic compounds to inorganic arsenic. The arsenic concentrations found when standard reference materials were ashed with this acid mixture were in agreement with the certified values.     

Quantification of Valerenic Acid in Valeriana jatamansi and Valeriana officinalis by HPTLC

A simple, rapid, cost-effective and accurate high performance thin layer chromatographic method has been developed for quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis which is one of the stable compounds of Valeriana officinalis and designated as a key marker compound. Valerenic acid makes substantial contribution to the sedative and spasmolytic activity of the essential oil and extract of Valeriana officinalis. Separation and quantification was achieved by HPTLC using ternary mobile phase of hexane: ethyl acetate: acetic acid (80:20:0.5 v/v) on precoated silica gel 60F₂₅₄ aluminium plates and densitometric determination was carried out after derivatization with anisaldehyde-sulphuric acid reagent at 700 nm, in absorption-reflectance mode. The calibration curves were linear in the range of (500 ng–2.5 μg). This is the first HPTLC report for the identification and quantification of valerenic acid in Valeriana jatamansi and Valeriana officinalis.     

6291型热变形温度和维卡软化温度测试仪的校准及故障排除

介绍6291型热变形温度和维卡软化温度测试仪的温度校准和位移校准方法，对测试仪的一些常见故障，例如电源故障，主温度传感器故障，电加热系统控制单元故障及测试站的温度偏差较大等进行了分析，并给出了排除故障的方法。     

Investigation of homo- and heterodimer alkali metal cation complexes of resorc[4]arenes by electrospray ionization mass spectrometry

Resorc[4]arenes are compounds with interesting properties, mainly because of their ability to form host-guest complexes with the guest located inside the cavity. The size of the guest limits the complexation, as shown by a competition experiment with tetraalkylammonium ions of different size. By electroscopy ionization tandem mass spectrometric experiments on resorc[4]arene heterodimers bearing an alkali metal ion as guest, it was found that there must be two different binding mechanisms for alkali metal ions with high surface charge density (Li(+) and Na(+)) on the one hand compared with those with a lower surface charge density on the other hand (K(+), Rb(+), Cs(+)).     

成像技术在食品安全与质量控制中的研究进展

食品质量与安全是政府、食品行业以及消费者十分关注的问题。为了保证食品质量与安全，需要对食品中的风险因子进行检测。传统的分析方法如生物化学方法和仪器分析方法（色谱法、色谱-质谱法）存在前处理比较复杂，耗时，对样品具有破坏性及无法获取目标物空间信息等缺点。因此，开发快速，无损，实时和可视化的检测技术十分重要，这也是食品领域研究的热点。近年来，高光谱成像技术融合了成像和光谱两种技术，可以作为一种用于食品质量和安全评估的非破坏性和实时检测的工具。拉曼光谱成像技术可以同时获得待测物的光谱和空间信息，具有快速，无损和低成本等优点，在食品安全评价和质量控制中也得到了成功应用。质谱成像技术不需要标记和染色，即可实现样品组织表面待测物的可视化和高通量分析。它作为一种分子可视化技术，可以获得食品中营养成分及内、外源性有害物质的空间分布信息，在食品领域也表现出良好的应用前景。本文检索了近几年国内外发表的成像技术在食品研究中的相关文献，介绍了高光谱成像技术、拉曼光谱成像技术和质谱成像技术的原理，并综述了它们在食品安全与质量控制中的应用。此外，本文分析和讨论了这几种成像技术的优缺点，并对成像技术在食品领域的发展前景做出了展望。