Facile Fabrication of PBS/CNTs Nanocomposite Foam for Electromagnetic Interference Shielding

In order to reduce the pollutants of environment and electromagnetic waves, environment friendly polymer foams with outstanding electromagnetic interference shielding are imminently required. In this paper, a kind of electromagnetic shielding, biodegradable nanocomposite foam was fabricated by blending poly (butylene succinate) (PBS) with carbon nanotubes (CNTs) followed by foaming with supercritical CO₂. The crystallization temperature and melting temperature of PBS/CNTs nanocomposites with 4 wt % of CNTs increased remarkably by 6 °C and 3.1 °C compared with that of pure PBS and a double crystal melting peak of various PBS samples appeared in DSC curves. Increasing the CNT content from 0 to 4 wt % leads to an increase of approximately 3 orders of magnitude in storage modulus and nearly 9 orders of magnitude in enhancement of electrical properties. Furthermore, CNTs endowed PBS nanocomposite foam with adjustable electromagnetic interference (EMI) shielding property, giving a specific EMI shielding effectiveness of 28.5 dB cm³/g. This study provides a promising methodology for preparing biodegradable, lightweight PBS/CNTs foam with outstanding electromagnetic shielding properties.     

Adaptive neuro-fuzzy interference system modelling for chlorpyrifos removal with walnut shell biochar

Accumulation of chlorpyrifos (CP), a pesticide, causes a significant environmental problem in food, surface/ground waters further to human health. The removal of the CP pollutant in surface/wastewater could be achieved by biochar due to the improved physical and chemical properties. In this work, the CP removal capacities of biochar samples derived from walnut shells at various temperatures from 450 to 900 °C were investigated. The experiments were performed as laboratory batch type study and the adsorption efficiency was determined at various conditions such as adsorbent dosage (10–500 mg/L), sorbate concentrations (100–1500 µg/L), contact time (0–300 min), initial pH (3–10), and the number of recycle.By subtracting the pyrolysis temperature from 450 °C to 900 °C, the surface areas were found to increase from 12.9 m²/g to 353.3 m²/g, respectively.The 143 experimental data were evaluated by a pair of kinetics and isotherm models and the Adaptive Neural Fuzzy Inference System (ANFIS). The developed ANFIS model was 98.56% successful in predicting the CP removal efficiency depending on the adsorption conditions. Walnut Shell Biochar (WSBC) can be applied for CP adsorption with 86.64% removal efficiency under optimum adsorption conditions (adsorbent = 250 µg/L, sorbate = 1000 µg/L, pH = 7.07 and contact time 15 min) thanks to its improved porosity. It was determined that the biochar samples could be reused 5 times. Equilibrium adsorption was observed to conform to the Langmuir isotherm, and the maximum adsorption capacity for WSBC@900 was 3.536 mg/g.     

Towards a spin-ensemble quantum memory for superconducting qubits

This article reviews efforts to build a new type of quantum device, which combines an ensemble of electronic spins with long coherence times, and a small-scale superconducting quantum processor. The goal is to store over long times arbitrary qubit states in orthogonal collective modes of the spin-ensemble, and to retrieve them on-demand. We first present the protocol devised for such a multi-mode quantum memory. We then describe a series of experimental results using NV (as in nitrogen vacancy) center spins in diamond, which demonstrate its main building blocks: the transfer of arbitrary quantum states from a qubit into the spin ensemble, and the multi-mode retrieval of classical microwave pulses down to the single-photon level with a Hahn-echo like sequence. A reset of the spin memory is implemented in-between two successive sequences using optical repumping of the spins.     

Cooperative spectrum sharing MIMO systems with successive decoding

A spectrum sharing system with primary and secondary nodes, each equipped with an arbitrary number of antennas, is investigated. Particularly, the outage performance of an underlay cognitive system is analytically studied, in the case when the end-to-end ($e2e$) communication is established via an intermediate relay node. To better enhance the $e2e$ communication, successive interference cancellation (SIC) is adopted, which compensates for both the transmission power constraint and the presence of interference from primary nodes. Both the relay and secondary receiver perform unordered SIC to successively decode the multiple streams, whereas the decode-and-forward relaying protocol is used for the $e2e$ communication. New closed-form expressions for the $e2e$ outage performance of each transmitted stream are derived in terms of finite sum series of the Tricomi confluent hypergeometric function. In addition, simplified yet tight approximations for the asymptotic outage performance are obtained. Useful engineering insights are manifested, such as the diversity order of the considered system and the impact of interference from the primary nodes in conjunction with the constrained transmission power of the secondary nodes.     

用Matlab比较双缝干涉和双缝衍射

运用Matlab软件,对双缝衍射和双缝干涉、单缝衍射的光强分布和谱线特征进行了数值模拟,绘出实验中难以观察到的光强分布图,比较出双缝衍射与双缝干涉及单缝衍射的联系与区别。     

纳米磁流体动态散斑干涉场的奇异场分布

通过对由纳米磁流体运动引起的双扫描激光散斑干涉光场及其变化做拉盖尔-高斯滤波下的傅里叶变换,获得动态散斑干涉图对应的光学涡旋分布及变化特征。分析认为,光学涡旋分布及变化对应着由纳米磁微粒及其团族的运动所引起的动态散斑变化。当纳米磁微粒聚集到分散的过程中,动态激光散斑光场的奇异场分布发生相应变化,说明了磁流体运动过程对应涡旋密度有先大后小,再由小变大的两个变化;并且光学涡旋密度高,对应较小颗粒的散斑场,磁流体处于稳态的状况;光学涡旋密度低,对应较大颗粒的散斑场,对应着磁流体激烈的运动。研究结果体现了奇异场分布变化和纳米磁流体动后趋稳的过程存在对应关系。     

铅镉重金属离子在铋膜电极上的相互影响

采用原位镀铋电极的方式,以玻碳电极为工作电极,通过改变Cd2+和Pb2+的比例,考察不同Pb2+和Cd2+浓度条件下,两者同时存在时的相互影响。实验发现,Cd2+和Pb2+同时存在时,存在相互的影响,特别是对于Cd2+的检测,由于Pb2+较正的析出电位,对于Cd2+的析出有一定的辅助作用。考察了Cd2+和Pb2+单独存在时的分析性能,Pb2+沉积时间为60 s时,在1~80μg/L范围内呈线性关系,检出限为0.5μg/L;Cd2+的沉积时间为120 s,在1~25μg/L和30~200μg/L范围内有良好的线性关系,检出限为1.0μg/L。考察了铋膜电极在不同实际水样中对Pb2+和Cd2+的分析,获得了较好的一致性。     

EMI shielding and dynamic mechanical analysis of graphene oxide-carbon nanotube-acrylonitrile butadiene styrene hybrid composites

Carbon nanomaterials such as carbon nanotubes (CNTs), graphene and their hybrid have been studied extensively. Despite having excellent properties of CNTs and graphene have not yet been fully realized in the polymer composites. During fabrication agglomeration of CNTs and restacking of graphene is a serious concern that results in the degradation of properties of nanomaterials into the final composites. To improve the dispersion of CNTs and restacking graphene, in the present research work, we focused on the hybridization of graphene oxide and CNTs. Multiwalled carbon nanotubes (MWCNTs), functionalized carbon nanotubes (FCNTs), and graphene oxide-carbon nanotubes (GCNTs) reinforced acrylonitrile butadiene styrene (ABS) composites were prepared separately by vacuum filtration followed by hot compression molding. Further, dynamic mechanical analysis (DMA), and electromagnetic interference (EMI) shielding properties of ABS composites reinforced carbon nanofillers were investigated. The dynamic mechanical properties of polymers strongly depend on the adhesion of fillers and polymer, entanglement density of polymer chains in the presence of carbon fillers. The dynamic mechanical characteristics such as storage, loss modulus, and damping factor of prepared composites were significantly affected by the incorporation of MWCNTs, FCNTs, and GCNTs. Maximum EMI shielding effectiveness of −49.6 dB was achieved for GCNT-ABS composites which were highest compared to MWCNTs-ABS composites (−38.6 dB) and FCNTs-ABS composites (−36.7 dB) in the Ku band (12.4–18 GHz). These results depict the great potential of GCNTs-ABS composites to be used in various applications of efficient heat dissipative EMI shielding materials for electronic devices.     

分子信标用于p53 mRNA的体外定量检测

根据p53基因的序列设计并合成了能特异性检测p53 mRNA的分子信标(MB), 发展了一种快速定量测定细胞内总RNA提取物中p53 mRNA的方法. 采用鼻咽癌(CNE2)细胞系和经RNA干扰技术降低p53基因表达的CNE2-p53RNAi细胞系, 抽提总RNA并用MB检测, 验证了MB的检测对象是p53 mRNA. 将该方法应用于多种肿瘤细胞内p53基因表达水平的分析, 表达变化趋势与经典的mRNA分析方法RT-PCR检测结果相符. 在此基础上, 用MB对5-氟尿嘧啶(5-Fu)处理的肺腺癌细胞(A549)进行了p53 mRNA的体外定量检测, 结果表明采用MB能够快速地获知该药物对细胞内p53 mRNA表达影响的信息.