带旋转毛玻璃干涉成像系统的统计分析

从统计光学出发,建立了带旋转毛玻璃干涉成像系统的信噪比理论模型,分析旋转毛玻璃参数、光场相干性与系统信噪比之间的关系。模拟计算和实验结果表明：旋转毛玻璃降低了干涉成像系统中光场的相干性,增大了曝光时间内采集的不相关散斑场个数,从而抑制了相干噪声;旋转毛玻璃表面粗糙度的增大,相关长度的缩短,转速的提高都会减小光场的相干时间。为了得到较理想的系统信噪比,应控制旋转毛玻璃参数使旋转周期约等于CCD曝光时间,并使光场相干长度为测试光和参考光间光程差的2～5倍。     

连续波腔衰荡光谱系统的电路设计与应用

为实现连续波腔衰荡光谱系统的工程化,设计了一套集信号调理、高速采样及数据处理为一体的高集成度数字信号处理(DSP)系统。该系统被用于取代常规连续波腔衰荡光谱系统中由高速数据采集卡及计算机组成的腔衰荡信号测试系统,完成对腔衰荡信号的获取与拟合。该系统最高能实现16 bits/80 MHz的信号采样,并能准确地由腔衰荡信号反演出腔衰荡时间。实验结果表明：结合现有的光反馈式连续波腔衰荡光谱系统,该系统能实现等噪声测量灵敏度为1.0×10-8 cm-1的吸收光谱测量,其重复测量精度可达3‰。     

速调管放大器大漂移管尺寸输入腔的3维分析与模拟

设计了3种耦合孔结构的大漂移管输入腔,分析比较了其冷腔场分布以及直流电子束通过输入腔间隙后的束流调制情况。计算结果表明：在工作模式下,开单扇形耦合孔和环形孔比开双扇形耦合孔的间隙场均匀;在大尺寸漂移管条件下,采用环形耦合孔输入腔的品质因数比单扇形耦合孔输入腔的小,环形耦合孔输入腔与微波注入波导匹配较好;在相同注入微波功率的情形下,环形耦合孔输入腔对种子源微波的吸收比单扇形耦合孔输入腔好且调制电流更大。     

Flexible taper-shaped liquid crystal trimer exhibiting a modulated smectic phase

We prepared some taper-shaped liquid-crystalline trimers in which two phenylpyrimidine units and a 1,4-diphenyl-2,3-difluorobenzene unit are connected to 2,4-dihdroxy benzoic acid via flexible spacers. We then investigated their liquid-crystalline properties using polarised optical microscopy, differential scanning microscopy and X-ray diffraction. 6-[4–(5-Octylpyrimidin-2-yl)phenyloxy]hexyl 2-{7-{4-[4–(4-hexylphenyl)-2,3-difluorophenyl]phenyloxy}heptanoyloxy}-4-{6-[4–(5-octylpyrimidin-2-yl)phenyloxy]hexyloxy}benzoate (1) was found to exhibit a phase sequence of isotropic liquid – nematic – intercalated smectic A – intercalated anticlinic smectic C – modulated smectic C. The structure–property relation in the taper-shaped trimers reveals that the modulated phase is induced by competition between an intercalated structure stabilised by dipole–dipole interaction and a monolayer structure by packing entropy effects. Conformational change of compound 1 induced by intermolecular interactions plays an important role in the phase transition behaviour.     

Observation of untoward 3Jcc correlations in 1,1‐ADEQUATE spectra of pyrimidine analogs: Avoiding potential interpretation pitfalls

Recently, it has been reported that large ⁿJ_CC correlations can sometimes be observed in 1,1‐ADEQUATE spectra with significant intensity, which opens the possibility of structural misassignment. In this work, we have focused on pyrimidine‐based compounds, which exhibit multiple bond correlations in the 1,1‐ADEQUATE experiment as a consequence of ³J_CC coupling constants greater than 10 Hz. Results are supported by both the experimental measurement of ³J_CC coupling constants in question using J‐modulated‐ADEQUATE and density functional theory calculations.     

Chitosan/Ce(IV) redox polymerization‐based amplification for detection of DNA point mutation

Polymerization‐based signal amplification, a technique developed for use in rapid diagnostic tests, hinges on the ability to localize initiators as a function of interfacial binding events. We report here a new DNA detection method in which polymer growth in redox‐polymerization is used as a means to amplify detection signals. The introduction of biotin‐labeled chitosan (biotin‐CS) with highly dense amino groups into the polymerization amplification as macromolecular reducing agent, beneficially simplifies amplification operation, as well as, provides a large amount of initiation points to improve the sensitivity of detection. DNA hybridization, SA and biotin binding reactions led to the attachment of CS on a solid surface where specific DNA sequences were located. With the addition of the mixture containing monomer AM, crosslinker PEGDA and oxidant CAN onto the CS location, the growth of polymer films was triggered to render the corresponding spots readily distinguishable to the naked eye. Direct visualization of 0.21 fmol target DNA molecules of interest was demonstrated. Non‐small cell lung cancer p53 sequence was further selected as a proof‐of‐principle to detect DNA point mutation. The proposed method exhibited an efficient amplification performance for molecule detection, and paved a new way for visual diagnosis of biomolecules. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1929–1937     

New relationship of displacement signal at quadrant photodiode: Control signal analysis and simulation of a laser tracker

New relationship of displacement signal using opposite sectors on a quadrant photodiode is derived. Standard and new displacement signals are analyzed in details. Through MATLAB^® laser tracking simulation models, based on common and suggested approaches, detailed analysis is performed, and it is shown that better results for the new relationship signal processing are obtained. Within new relationship of displacement signal, the sensitivity of the system to the displacement of the spot increases and, hence, provides better accuracy in positioning up to 30%.     

Molecular signal suppression by in situ microextraction in nuclear magnetic resonance spectroscopy

The detailed characterization of complex mixtures by NMR is often hampered by the presence of signals from uninformative compounds, the resonances of which overlap with those of the molecules of interest. We provide here a proof of principle for an approach to NMR signal suppression in complex samples using Molecularly Imprinted Polymers (MIPS). Addition of a few milligrams of polymer to a solution traps the target molecule in typical micromolar to millimolar concentration, thus achieving in situ signal suppression, without altering any other spectral features. This method minimized any manipulation or perturbation of the spectrum and was applied to a complex mixture of known compounds and to a plant extract, in both cases spiked with a compound (bisphenol A), which was subsequently removed by selective binding to a complementary MIP. What is described in this report is comparable with microextraction and may in due course be applied to a large number of analytical challenges. Copyright © 2014 John Wiley & Sons, Ltd.     

A new class of conformable spectral observers for signal reconstruction

In this work, the design of spectral observers for signal reconstruction based on Kalman filters is performed and evaluated. The conformable derivative and the beta‐derivative were used to design the Kalman filters. Both derivatives satisfy the same formulas of the classical derivation, eg, the chain rule. The derivative order, the Ricatti equation parameters, and the observers tuning parameters were optimized using an optimization algorithm based on the bat's echolocation behavior (Bat algorithm). The simulation results showed the advantages of using the proposed observers for the signal reconstruction.