Chaos synchronization and encoding in coupled semiconductor lasers of multiple modulated time delays

We numerically investigate the synchronization performance of unidirectionally and bidirectionally coupled chaotic semiconductor lasers subject to multiple modulated time delays optical feedbacks. Moreover, by studying the autocorrelation function of the coherent feedback semiconductor laser output, we find that the signatures of time delays can be erased in systems incorporating modulated feedback time delays, which largely improve the system security. Finally, chaos masking switching (CMS) is utilized to examine the communication ability. Numerical results indicate that the messages could be successfully recovered both in unidirectionally and bidirectionally coupled lasers, which confirms the possibility of applying multiple modulated delay system in optical chaos secure communication.     

针板型触发电晕稳定开关的特性

 为了验证在空气状态下电晕稳定开关的重复频率特性,对自行研制的盘式触发三电极电晕稳定开关的工作特性进行了实验研究,并分析了实验结果。结果表明,在空气状态下,开关具有良好的触发特性,开关抖动和导通时延最小可以分别控制在4, 36 ns;同时,还可以通过减小触发间隙,进一步减小开关的导通时延和增加开关的稳定性。     

大口径薄片激光器中的谐振模式及光束质量诊断

基于自再现原理,利用菲涅耳-基尔霍夫衍射积分方程,引入腔镜失调、激光介质上的增益分布以及光阑口径,采用本征矢量法分析了大口径平凹腔薄片激光器的本征模式,并计算了相应的光束质量因子M2.建立了千瓦级薄片激光系统和光纤扫描光斑诊断装置,开展了高功率激光输出特性研究.结果表明,在大口径高功率平凹腔中多个本征模式可同时起振,获...     

Temperature Modulated DSC for the Investigation of Polymer Materials: A brief account of recent studies

Temperature modulated differential scanning calorimetry (TMDSC), the most recent development that adds periodic modulation to the conventional DSC, has recently seen a fast growth due to availability of commercial instrumentation. The use of the technique necessitates a total control of all of the experimental parameters. The paper focuses on recent applications to investigate polymers [1].This revised version was published online in November 2005 with corrections to the Cover Date.     

Effects of Deformation Rate on the Necking of an Amorphous Copolyester Studied by Modulated DSC

The tensile loading-induced necking in notched specimens of an amorphous copolyester (aCOP) was studied by modulated differential scanning calorimetry (MDSC). It was shown that necking occurred by cold drawing since the enthalpy of cold crystallization and that of the subsequent melting agreed fairly with each other. Increasing deformation in the necking zone and increasing deformation rate of the specimens shifted the onset of cold crystallization toward lower temperatures and yielded a slightly higher glass transition temperature (T_g). This was attributed to the molecular orientation caused by mechanical loading. The finding that the melting contained a non-reversing part was considered as appearance of possible microcrystallinity. The T_g range was strongly influenced by the deformation rate and reflects the thermomechanical history of the samples accordingly. This revised version was published online in August 2006 with corrections to the Cover Date.     

Determination of trapping–detrapping events,recombination processes and gap-state parameters by modulated photocurrent measurements on amorphous silicon

Analysis of the out-of-phase modulated photocurrent (MPC) signal, the so-called Y signal, is proposed for determining the trapping–detrapping events, recombination processes and gap-state parameters in amorphous silicon. This is demonstrated by analysing experimental Y spectra obtained on this material from different laboratories including our own. Model simulations are also employed in which the amphoteric nature of the dangling bonds and their distribution according to the defect-pool model are taken into account. From the reconstruction of the Y signal, phase shift and MPC amplitude spectra, several contributions resolved from the frequency dependence of the experimental Y spectra are identified. Two electron trapping–detrapping processes are resolved. These are attributed to hydrogen-related positive defects and to transitions involving the D^+/0 level of the normal dangling bonds from the defect-pool distribution. At lower frequencies a residual contribution is resolved that is attributed to a term related to recombination through the D^+/0 and D^0/? levels. Between 300 and 150?K the above recombination contribution is essentially from the D^0/? and dominates the Y signal at lower frequencies. In this region a characteristic phase lead appears, which is attributed to the existence of safe hole traps in the valence band tail. Around 150?K, trapping–detrapping events in the conduction band tail dominate.     

Film-thickness Error Analysis of Optical Disk Systems

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｒｅｃｅｎｔｌｙｏｐｔｉｃａｌｄｉｓｋｓａｂｌｅｔｏｓｔｏｒｅａｌａｒｇｅｑｕａｎｔｉｔｙｏｆｉｎｆｏｒｍａｔｉｏｎｈａｖｅｂｅｅｎｕｓｅｄａｓｃｏｍｐａｃｔｄｉｓｋ (ＣＤ ) ,ｄｉｇｉｔａｌｖｅｒｓａｔｉｌｅｄｉｓｋ(ＤＶＤ) ,ａｎｄｔｈｅｉｒｒｅｃｏｒｄａｂｌｅｏｒｒｅｗｒｉｔａｂｌｅｔｙｐｅｓ(ｓｕｃｈａｓＣＤ Ｒ ,ＣＤ ＲＷ ,ＤＶＤ Ｒ ,ａｎｄＤＶＤ ＲＡＭ ) [1 ] .Ａｎｏｐｔｉｃａｌｄｉｓｋｉｓａｋｉｎｄｏｆｍｕｌｔｉｌａｙｅｒｓｙｓｔｅｍｄｅｐｏｓｉｔｅｄｏｎａ…     

光盘用2P胶应用研究进展

对光盘用２Ｐ胶的应用研究进展情况进行了评述，其中光盘制备用光聚合浮雕成型２Ｐ胶的基本组成为各类多官能团丙烯酸酯类单体；光盘保护涂层用２Ｐ胶主要组分为环氧丙烯酸酯类预聚体。     

Room Temperature Ionic Liquid Carbon Nanotube Paste Electrodes: Overcoming Large Capacitive Currents Using Rotating Disk Electrodes

The voltammetric response of graphite or carbon nanotube paste electrodes, which incorporate the room temperature ionic liquid, N‐butyl‐N‐methyl pyrrolidinium bis(trifluoromethylsulfonyl) imide or [C₄mpyrr][NTf₂], (RTIL‐CNTPE and RTIL‐CPE respectively) as the binder, towards anionic, cationic and neutral redox probes is examined and compared to conventional paste electrodes which use mineral oil as the binder. The RTIL paste electrodes are found to suffer from very large background currents due to capacitive charging. This is exacerbated further when CNTs are combined with RTILs in the paste. The large charging currents obscure any Faradaic processes of interest, especially at low analyte concentrations. By employing steady state voltammetry at a rotating disk electrode made of the RTIL pastes this problem can be overcome. This allows the electroanalytical properties of these interesting electrode substrates, which combine the attractive properties of CNTs with RTILs to be further explored and developed.     

瞄准制导仪中的调制盘光学系统分析

瞄准制导仪中的调制盘光学系统包含有光束投射系统、光束投影系统和旋转调制盘。基于旋转调制盘图案设计的原理,分析了瞄准制导仪中内、外调制图案与光学系统的配合问题。较详细地分析了激光束投射系统和投影系统。