纳米CoHCF修饰电极的制备及其对血红蛋白的电化学测定研究

A cobalt hexacyanoferrate （CoHCF） nanoparticle （size ca. 60 nm） chemically modified electrode （CME） was fabricated and the electrochemical behavior of hemoglobin （Hb） at this nanosized CoHCF CME was studied. In comparison with a bare glassy carbon electrode （GCE） and a general CoHCF CME electrodeposited in a traditional manner, the present nanosized CoHCF CME performed efficiently electrocatalytic reduction for Hb with relatively high sensitivity, stability, and longlife, Combined with liquid chromatography （LC）, the nanosized CoHCF CME was used as the electrochemical detector of Hb in the established flow injection analysis-electrochemical determination （FIA-ECD） system. The peak current was a linear function of concentrations in the range from 2.5×10^-8 to 5.0×10^-6mol/L for Hb, with detection limit of 1.4×10^-8 mol/L. The FIA-ECD system has been successfully applied to assess the Hb content of clinic blood samples with advantages of sensitiveness, speediness, easy control and small sample-consumption.     

SSCH3光解离的多参考理论计算

摘要运用多参考微扰理论(Multireference MΦller-Plesset theory)计算了SSCH3垂直激发能及其S-C与S-S两种断键方式的绝热(Adiabatic)与非绝热(Diabatic)的基态和激发态势能曲线, 研究了在193nm激光作用下SSCH3的光解离过程, 理论计算值与实验值相符.     

The electrostatic field of B-DNA

The electrostatic field associated with one complete turn of B-DNA is presented. Two base sequences poly (dG) · poly (dC) and poly (dA) · poly (dT) are studied and the effects of sodium counterions bound to the nucleic acid are investigated. The contrasts between the electrostatic potential and the electrostatic field of the macromolecules are discussed and the possible applications of the field are considered.     

Electrochemistry of capillary systems with narrow pores. IV. Dialysis potentials

The dialysis potentials of different collodion membranes with graded pore sizes and electrochemical activities have been measured in dilute aqueous KCl solutions as functions of concentration. It is possible to predict the value of the diffusion potential within a few millivolts on the basis of electrical conductivity data obtained with the same membranes. In general, the measured values are lower than those calculated. It is assumed that this difference is caused by the membranes having a distribution of pore sizes.     

二氧化碳和氧气的快速电化学方法联合测定

根据Ｏ２和ＣＯ２在二甲亚砜（ＤＭＳＯ）介质中Ｐｔ电极上的伏安特性，采用微电极并结构计算机控制的电位调制技术，建立了快速联合测定ＣＯ２和Ｏ２的调制电位脉冲库仑法和调制电位脉冲电流法，取得了满意的结果。一次测量时间快达４０ｍｓ。ＣＯ２检测范围０￣１０％（体积百分比）；Ｏ２检测范围不受限制。通过编程设计特定的调制电位－时间波形，可保持连续检测的长期稳定性。     

Synthesis and properties of 7,7-bis(heteroazulen-3-yl)-8,8-dicyano-1,4-quinodimethanes

The synthesis and properties of a novel type of 7,7-bis(heteroazulen-3-yl)-8,8-dicyano-1,4-quinodimethanes (9a-c) are studied. The synthetic method is based on a TFA-catalyzed electrophilic aromatic substitution on the heteroazulenes with 4-(dicyanomethyl)benzaldehyde to afford the corresponding methane derivatives, followed by oxidative hydrogen abstraction with DDQ. The polarization of 9a-c is evaluated by the inspection of their ¹³C NMR and IR spectra. Based on the investigation of the UV-Vis spectra of 9a-c and protonated cations 10a-c, conformational changes of the heteroazulene-moiety and (dicyanomethyl)phenyl group are suggested. In the CV measurements of 9a-c, two reversible reduction waves are observed, indicating the stabilizing ability of heteroazulenes toward the corresponding radical and anion species. Furthermore, 9a-c exhibit two irreversible oxidation waves, which suggest a conformational change in the radical cation during the redox process. The conformational change is rationalized on the basis of the MO calculations.     

S1←S0 Vibronic spectra and the structure of acetyl fluoride-h3 and acetyl fluoride-d3 molecules

UV absorption spectra of acetyl fluoride-h₃ and -d₃ (CH₃COF and CD₃COF) molecules in the region of S₁S₀ electronic transitions are investigated. The origins (0⁰ ₀ or 14^0± ₀) of these transitions are observed at 39912 and 39904 cm^–1, respectively, and some of the fundamental frequencies of these molecules in the s₀ and S₁ states are determined. In particular, the systems of torsion and inversion (out-of-plane C=O vibrations) energy levels are studied. The geometric parameters of an acetyl fluoride-h₃ molecule in the S₁ state are estimated by the theoretical simulation of the rotational contours of the 0⁰ ₀ (14^0± ₀) band. These data are used to evaluate the potential barriers to internal rotation in the S₀ and S₁ states, which were found to be 360 and 560 cm^–1 for acetyl fluoride-h₃ and 380 and 770 cm^–1 for acetyl fluoride-d₃, respectively, as well as the potential barriers to inversion in the S₁ states, which were found to be 2090 and 2370 cm^–1 for acetyl fluoride-h₃ and acetyl fluoride-d₃, respectively.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1957–1964, November, 1994.In conclusion, the authors would like to acknowledge T. S. Kuznetsova for the synthesis and purification of the AF samples.The research presented here was supported in part by the International Science Foundation under grant No. MJ 1000.     

Model studies of the chemisorption of hydrogen and oxygen on nickel surfaces

Atomic chemisorption of hydrogen and oxygen on the Ni(100) surface has been studied using an Effective Core Potential (ECP) approach described in a previous paper. Clusters of up to 50 nickel atoms have been used to model the surface. The computed chemisorption energies are 62 kcal/mol (exp. 63 kcal/mol) for hydrogen and 106 kcal/mol (exp. 115–130 kcal/mol) for oxygen. Correlating the adsorbate and the cluster-adsorbate bonds is extremely important for obtaining accceptable results, particularly for oxygen. Reasonable convergence of chemisorption energies is obtained with 40–50 cluster atoms for both hydrogen and oxygen. For hydrogen the addition of a third cluster layer stabilizes the results considerably. Both hydrogen and oxygen are adsorbed at (or close to) the four-fold hollow site. The calculated barriers for surface migration are also in good agreement with the experimental estimates. The calculated equilibrium heights above the surface are on the other hand too high compared with experiments. This disagreement is believed to be due to core-valence correlation effects, which are not incorporated in the present ECP. The cluster convergence for the height above the surface is much slower than for the chemisorption energy.     

铁氰化锰修饰玻碳电极的制备及其电化学性能

A thin film of manganese hexacyanoferrate （MnHCF） was electrochemically formed on a glassy carbon （GC） electrode to prepare a chemically modified electrode （CME）. The mechanism of film formation of MnHCF and its growth process were investigated in detail by cyclic voltammetry. The results show that the stoichiometric composition of MnHCF is Mn^ⅢFe^Ⅲ（CN）6, an analogue of prussian yellow. There exist three clear-cut stages in the whole modification process and the last stage is indispensable to the fabrication of homogenized, stable MnHCF film and must last for an appropriate time. The surface morphology of MnHCF/GC electrode was characterized by scanning electron microscopy （SEM）, which further verified the effective deposition of MnHCF film on GC. The kinetic constants of MnHCF/GC electrode process were also evaluated. The resulting MnHCF film modified electrode presented good stability and high electrocatalytic activity toward the oxidation of H2O2, indicating that MnHCF film possesses function of catalase and can be expected for analytical purposes.