Continuous‐scan capability at SSRL and applications to X‐ray diffraction

Typical X‐ray diffraction measurements are made by moving a detector to discrete positions in space and then measuring the signal at each stationary position. This step‐scanning method can be time‐consuming, and may induce vibrations in the measurement system when the motors are accelerated and decelerated at each position. Furthermore, diffraction information between the data points may be missed unless a fine step‐scanning is used, which further increases the total measurement time. To utilize beam time efficiently, the motor acceleration and deceleration time should be minimized, and the signal‐to‐noise ratio should be maximized. To accomplish this, an integrated continuous‐scan system was developed at the Stanford Synchrotron Radiation Lightsource (SSRL). The continuous‐scan system uses an in‐house integrated motor controller system and counter/timer electronics. SPEC software is used to control both the hardware and data acquisition systems. The time efficiency and repeatability of the continuous‐scan system were tested using X‐ray diffraction from a ZnO powder and compared with the step‐scan technique. Advantages and limitations of the continuous‐scan system and a demonstration of variable‐velocity continuous scan are discussed.     

基于二元光学设计的高能激光窗口的初步探讨

对非均匀近场强度分布影响强激光远场聚焦效果的原因进行了分析。对高能激光窗口进行了二元光学设计。提高了光束强度分布的均匀性,改善了光束质量。介绍了二元光学设计的基本原理,采用随机并行扰动爬山法对窗口的位相分布、变换后的光束强度分布、衍射效率和光束均匀性进行了计算。计算结果表明,基于二元光学设计的激光窗口能有效地改善光束强度分布的均匀性,提高了发射光束的质量。     

Electron-impact dissociation and transient properties of a stored LiH2 - beam

The fragmentation of LiH₂ ^- anions after electron impact was investigated at the heavy-ion storage ring TSR. The main reaction channel was found to be electron detachment followed by a breakup into LiH + H. In the first ms after production of the molecular ions in a cesium sputtering ion source, additional contributions were observed in the Li + H₂ and Li^- + H₂ channels, hinting at an initial population of a short-lived state of the anion. To gain a better understanding of the mechanisms underlying the observed behavior of the system, ab initio calculations of relevant potential energy surfaces were performed at selected geometries. The experimental findings are discussed in the light of these calculations.     

Aeolian transport of sand

The airborne transport of particles on a granular surface by the saltation mechanism is studied through numerical simulation of particles dragged by turbulent air flow. We calculate the saturated flux q_s and show that its dependence on the wind strength u_* is consistent with several empirical relations obtained from experimental measurements. We propose and explain a new relation for fluxes close to the threshold velocity u_t, namely, q_s=a(u_*-u_t)^α with α≈2. We also obtain the distortion of the velocity profile of the wind due to the drag of the particles and find a novel dynamical scaling relation. We also obtain a new expression for the dependence of the height of the saltation layer as function of the strength of the wind.     

Characterization of an in‐vacuum PILATUS 1M detector

A dedicated in‐vacuum X‐ray detector based on the hybrid pixel PILATUS 1M detector has been installed at the four‐crystal monochromator beamline of the PTB at the electron storage ring BESSY II in Berlin, Germany. Owing to its windowless operation, the detector can be used in the entire photon energy range of the beamline from 10 keV down to 1.75 keV for small‐angle X‐ray scattering (SAXS) experiments and anomalous SAXS at absorption edges of light elements. The radiometric and geometric properties of the detector such as quantum efficiency, pixel pitch and module alignment have been determined with low uncertainties. The first grazing‐incidence SAXS results demonstrate the superior resolution in momentum transfer achievable at low photon energies.     

Temperature tunability of cavity-semiconducting waveguide coupling in a two-dimensional photonic crystal

We study the coupling efficiency between a cavity resonator and semiconducting waveguide in a two-dimensional photonic crystal by varying the temperature. We used the revised plane wave expansion and finite difference time domain methods to evaluate the coupling efficiency. The photonic crystal waveguide is composed of a row of InSb semiconducting materials, and the efficiency was calculated at various temperatures. The findings indicate that the temperature can be used as a useful efficiency controller.     

Compare study between smoothing efficiencies of epicyclic motion and orbital motion

The smoothing efficiencies of epicyclic motion and orbital motion in CCOS (computer controlled optical surfacing) were compared. CCOS polishing can smooth out mid-to-high spatial frequency errors which are smaller than tool size on optical mirrors due to the rigidity of polishing tools. The smoothing efficiencies of epicyclic motion and orbital motion with pitch lap and RC lap were compared and the result proved pitch lap with epicyclic motion smoothed ∼1.6 times faster than pitch lap with orbital motion while RC lap with epicyclic motion smoothed ∼1.85 times faster than RC lap with orbital motion.     

An approach to evaluate the efficiency of y-ray detectors to determine the radioactivity in environmental samples

This work provides an approach to determine the efficiency of T-ray detectors with a good accuracy in order to determine the concentrations of either naturally occurring or artificially prepared radionuclides. This approach is based on the efficiency transfer formula （ET）, the effective solid angles, the self- absorptions of the source matrix, the attenuation by the source container and the detector housing materials on the detector efficiency. The experimental calibration process was done using radioactive （Cylindrical ＆ Marinelli） sources, in different dimensions, that contain aqueous 152Eu radionuclide. The comparison point to a fine agreement between the experimental measured and calculated efficiencies for the （NaI ＆ HPGe） detectors using volumetric radioactive sources.     

The analysis of spatial light to Bragg fiber coupling ratio

On the basis of the electromagnetic field mode matching theory, the coupling efficiency ratio from spatial light to Bragg fiber is analyzed, which shows that the coupling efficiency ratio is related to the radius of focused facular, the core radius of Bragg fiber and wave number of the core. By optimizing the value of such parameters appropriately, the Bragg fiber coupling efficiency ratio can be improved. It is also important for the analysis of the coupling efficiency of Bragg fiber, which can be applied to the free optical communication system and laser radar system.     

Structural and optical properties of CuSe2 nanocrystals formed in thin solid Cu–Se film

This paper describes the structural and optical properties of Cu–Se thin films. The surface morphology of thin films was investigated by atomic force microscopy (AFM) and scanning electron microscopy (SEM). Formation of Cu–Se thin films is concluded to proceed unevenly, in the form of islands which later grew into agglomerates. The structural characterization of Cu–Se thin film was investigated using X-ray diffraction pattern (XRD). The presence of two-phase system is observed. One is the solid solution of Cu in Se and the other is low-pressure modification of CuSe₂. The Raman spectroscopy was used to identify and quantify the individual phases present in the Cu–Se films. Red shift and asymmetry of Raman mode characteristic for CuSe₂ enable us to estimate nanocrystal dimension. In the analysis of the far-infrared reflection spectra, numerical model for calculating the reflectivity coefficient of layered system, which includes film with nanocrystalite inclusions (modeled by Maxwell-Garnett approximation) and substrate, has been applied.