Cyclodextrin Solubilization of the Antibacterial Agents Triclosan and Triclocarban: Effect of Ionization and Polymers

The natural β-cyclodextrin (βCD) and its complexes have limited solubility in aqueous solutions. This low aqueous solubility, as well as low aqueous solubility of the guest molecule (i.e. triclosan or triclocarban (TCC)), can result in low complexation efficiency (CE). The purpose of this study was to enhance the apparent intrinsic solubility (S ₀) of the guest molecule and its βCD complexes through ionization and addition of auxiliary compounds such as polymers, amino acids and metal ions. Both triclosan (pK _a 7.9) and TCC (pK _a 12.7) are weak acids. Addition of ethanol to the complexation medium enhanced S ₀ of both triclosan and TCC but at the same time ethanol lowered the stability constant (K _c ) of their βCD complexes resulting in overall lowering of CE. Addition of small amount of water-soluble polymers enhanced the βCD solubilization of both guests, and addition lysine enhanced the solubilization of TCC. Ionization of triclosan resulted in significant enhancement of CE and enhanced triclosan release from tablets containing triclosan/βCD complex. The effect of ionization was not as pronounced in the case of TCC.This revised version was published online in July 2005 with a corrected issue number.     

Polymer-protected palladium nanoparticles. Morphologies and catalytic selectivities

Colloidal palladium nanocatalysts prepared by in situ reductions of palladium chloride were immobilized and protected by either of two water-soluble polymers. The particle sizes and size distributions of the palladium colloids were determined by transmission electron microscopy. Their selectivities as catalysts were determined by comparing the extents of hydrogenation of carefully chosen pairs of small-molecule olefins. There was found to be high hydrogenation selectivity with regard to cyclic vs. noncyclic olefins. Selectivity was relatively low, however, among olefins that differed only in size (such as hexene vs. octene), or olefins differing only with regard to the positions of the double bonds (such as 1-octene vs. 3-octene). Selectivity could be improved by careful choice of the immobilizing polymer, and by its use at relatively high concentrations.     

Heats of Mixing of Mixed Solvent Solutions of Alkali Metal Salts of Substituted Benzenesulfonic Acids

The enthalpy change on mixing solutions of methyl-substituted benzenesulfonic acids and their salts, with salts having a common cation or anion, at constant ionic strength in mixtures of 1,4-dioxane with water, were measured at 25°C. The heat effects of mixing solutions having a common anion increase almost linearly with the reciprocal value of the dielectric constant of the solvent. The heat effects of mixing solutions having a common cation, which are all negative in water-rich solutions, become endothermic after a certain value of the dielectric constant is passed. The results are discussed in terms of the solute-solvent structural properties. This revised version was published online in July 2006 with corrections to the Cover Date.     

杨村烟煤快速液化反应性的研究

用共振搅拌反应器研究了杨村烟煤的高温快速液化。研究发现，在体系保持较高活性氢浓度时，适当提高反应温度，缩短反应时间——在短时间内达到较高的煤转化率,即高温快速液化是可行的。高温快速液化的最佳反应温度正是热重曲线反映的煤活泼热解温度范围的上限。从液化产物看，高温快速液化反应产物中苯可溶物占绝大多数，这对于煤液化产物的进一步利用非常有利。     

Thermodynamics of multicomponent electrolyte solutions: Aqueous mixtures of two salts from among NaCl,KCl, NaH2PO4, and KH2PO4 at 25° C

Five of the six possible aqueous two-salt mixtures from among NaCl, KCl, NaH₂PO₄,and KH₂PO₄ have been studied by the isopiestic method at 25°C. The sixth mixture, NaCl–KCl, has been studied previously. The deviations from ideal mixing behavior are described by a series of coefficients which were found by regression analysis. The coefficients were used to calculate the excess Gibbs energies of mixing for equal ionic strength fractions of each salt and the trace activity coefficient of each salt at an ionic strength of 2 mode-kg^–1. The cross-square mixing rule is obeyed within experimental uncertainty for the excess Gibbs energies of mixing.     

Studying dispersoid systems

Summary Measurements of energy transformation in mitochondria are done on a capillary differential titration calorimeter CTD2156. It is important to mention that a sediment is quickly formed by the mitochondria suspension without mixing by means of a vibrating needle. During the measurements, the vibrating needle is located inside the working volume of the chamber. The design of the calorimeter is substantiated theoretically. It provides a new mode of a reagent input in the measuring volume of the calorimetric chambers. It expands the spectrum of tasks that can be solved using this instrument. In the capillary calorimeter the calorimetric chambers unit is simple and small in size. These advantages of capillary chambers provide an opportunity to unite 20 capillary calorimetric chambers in one calorimetric block. It allows designing a multi-channel titration calorimeter. There are obvious advantages of such a calorimeter over other instruments in screening researches and in researches of objects maintaining stability only for a short time.     

J-aggregation and its characterization in Langmuir-Blodgett films of merocyanine dyes

Langmuir-Blodgett (LB) films are constructed by successively transferring monomolecular layers formed at the air-water interface onto solid substrates. One of the advantages of the LB technique in fabricating molecular aggregates lies in the fact that it can employ various kinds of molecules by mixing them at the air-water interface. The mixed system may exhibit new properties that are not observed for individual components. This method would be useful, for example, in the studies of the formation and control of the J-aggregates of functional dyes that attract attention both in science and technology. In this paper, I review this subject mainly based on our recent results in merocyanines. LB films of merocyanine dyes, mixed with arachidic acid (C(20)), exhibit J-aggregate formation and have been serving as typical systems in revealing the physical and structural aspects of nanosized molecular aggregates constructed as monolayers. In the case of LB films of a merocyanine dye having benzothiazole as donor nucleus (abbreviated as DS), electron spin resonance (ESR) spectroscopy has been successful in determining the characteristic in-plane orientation of dye molecules with respect to the dipping direction, which led to the discovery of the flow orientation effect during the dipping process of LB films as the origin of optical dichroism often observed in LB films. In this article, after an introduction of ESR spectroscopy, three major topics on the merocyanine J-aggregation and its characterization in mixed films are discussed. The first topic is the observation and control of the size of J-aggregates in the dilution limit of dyes in arachidic acid matrix for a methyl-substituted DS (6-Me-DS). Dependence of atomic force microscopy (AFM) patterns on the molar ratio allows the identification of dye domains. J-band optical peak analysis based on the Kuhn's extended dipole model, supplemented by a novel application of femtosecond pump-probe optical spectroscopy, yields the size of the J-aggregates of 10(3). The second topic is the control of the J-band peak wavelengths by mixing two different kinds of dye molecules. The first case is the mixture of a J-forming 6-Me-DS and non-J-forming merocyanine analog, DO with benzo-oxazole instead of benzothiazole of DS. The second case is the mixture of both J-forming dyes but with different J-band peak positions, 6-Me-DS and another analog of 5-Cl-DS. The optical peak shifts depending on the molar mixing ratio will be presented. The last topic is related to the elucidation of electronic states of dye molecules in the J-aggregates. Light-induced ESR (LESR) of DS films with stable isotope ((15)N or (13)C)-substituted dyes provide clear evidence for the photoinduced charge transfer by the detection of hyperfine structures. Moreover, infrared (IR) spectroscopy of (13)C-enriched dye identifies the IR absorption peak of the relevant carbon in the chromophore. The results give evidence for the enhanced intramolecular charge transfer of dyes in the J-aggregates compared with an isolated merocyanine composed of donor and acceptor moiety. Lastly, the Cl attachment in 5-Cl-DS leads to a significant enhancement of the nitrogen hyperfine coupling in the LESR spectra. These examples and others demonstrate the potential of LB films of merocyanines in the studies of the nanosized molecular aggregates in monolayer assemblies.     

层状正极材料LiNi1/6Co1/6Mn2/3O2的制备及电池性能

0引言为解决目前日益严重的汽车尾气排放对城市空气造成污染问题,作为绿色能源的锂离子电池已成为动力电池的首选对象。国际上,高容量、大功率锂离子电池早于1995年已开始研制。1996年,我国天津电源研究所也进行了大容量锂离子蓄电池及电池组的探索[1]。目前,锂离子电池的正极材料是制约其大规模推广应用的关键。现研究的正极材料主要包括具有层状结构的LiCoO2,LiN iO2和LiM nO2及具有尖晶石结构的LiM n2O4等。其中LiC oO2作为目前唯一已经商业化的正极材料具有理论容量高、可循环性能好等优点,但因Co资源的相对缺乏导致其价格高昂。…     

基于三阶段SBM模型的中国节能服务上市企业效率研究

节能服务企业效率对于推动节能服务产业发展和确保国家“双碳”目标实现具有重要意义。运用三阶段SBM模型,对2020年60家中国节能服务上市企业的综合效率进行实证研究,并分析效率的影响因素。研究结果表明,经济发展水平对综合效率具有双重影响,合适的产业结构和较高的投入资本回报率有利于综合效率提升,而政府补贴与企业存续时间制约了综合效率改进;剔除环境因素与随机误差影响后,多数企业综合效率下降,整体效率偏低;提高规模效率是提升综合效率的关键,且绝大部分企业处于规模收益递增状态。研究最后提出创新补贴方式、建立企业认证制度、开展综合能源服务和推动企业间兼并重组等可行建议,以提升节能服务企业的综合效率。     

含有偏好的DEA-BWM评价方法研究

针对传统的DEA模型在评估过程中并未考虑决策者对相关指标权重的偏好,将最优最差方法(BWM)嵌入到传统DEA模型中,基于决策者偏好排序的判断矩阵,构建一种含有偏好的DEA-BWM评价方法。首先在保持传统DEA方法的优势基础上,构建了CCR-BWM评价模型对各DMU进行评价。同时考虑为了便于各决策单元在统一权重基础上相互比较,构建了CSW-BWM公共权重模型。另外考虑决策单元自评和互评,构建了NCE-BWM中立型交叉效率。然后采用min-max方法分别将上述三种多目标评价模型转换为单目标线性规划进行求解。最后,选择一组算例对三种模型的有效性与合理性进行验证。