Preparation of a novel infrared low-emissive coating from the Cu powder modified by the polyethylene wax

Cu powder was coated with polyethylene wax via the flux-capping method in hope to avoid the oxidation of it, so the increment of the infrared emissivity of the coating can be greatly reduced. The prepared product was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). The infrared emissivity of the prepared material was measured by Infrared Emissometer. The influence parameters that will affect the emissivity of the coating were systematically investigated, such as the content of coated Cu powder, coating fineness, coating thickness and aging process. The results indicated that the infrared emissivity value of the coating was reduced after Cu powder was coated with polyethylene wax. The polyethylene wax/Cu composites presented a homogenous sheet structure when the content of Cu powder increased to 30 wt.%, and it has a lower emissivity. The infrared emissivity of the coating increases rapidly as thickness increases and becomes steady above thickness of 70 μm. The composite coating exhibits lower emissivity value and excellent physical properties at coated Cu content of 20 wt.%. The emissivity of the coating that was prepared from the modification of the Cu powder was decreased with the decrement of the grinding fineness and increased with the aging time. The emissivity of the coating that was prepared from the modification of the Cu powder is always lower than that of the coating that only composed of the Cu powder with the increment of the aging time. Therefore, it can be concluded that the anti-oxidation of Cu powder is greatly improved after it was modified by polyethylene wax, which results in a novel coating with long-run low emissivity.     

Monoclinic β-Li2TiO3: Neutron diffraction study and estimation of Li diffusion pathways

A neutron powder diffraction study on lithium titanate Li₂TiO₃ was performed at low temperatures. The monoclinic β-phase has been found to be stable over the whole investigated range of temperatures (4 K–300 K). A smooth and nonlinear increase of the lattice parameters has been observed upon heating and correlated to the behavior of interatomic distances. Lithium diffusion pathways in Li₂TiO₃ were estimated theoretically on the basis of the obtained structural data using bond-valence modeling. Experimentally diffusion pathways were evaluated by analysis of the negative nuclear scattering densities at 1073 K, which were reconstructed using a maximum entropy method. Although the bond-valence mismatch map indicated a possible Li diffusion either in ab plane or along c direction, analysis of the experimental data revealed that Li migration is thermodynamically less feasible in latter case.     

功能化离子液体液化木粉及其酚醛复合材料

合成了氯代1-(2-羟乙基)-3-甲基咪唑离子液体[He MIM]Cl、溴代1-乙胺基-3-甲基咪唑离子液体[Ae MIM]Br和氯代1-羧乙基-3-甲基咪唑离子液体[Ce MIM]Cl 3种功能化咪唑离子液体,并分别进行了红外与氢核磁结构表征.然后用3种离子液体液化木粉,液化3 h后向体系直接加入苯酚、甲醛和氢氧化钠,制备酚醛复合材料,并采用FTIR、XRD、DSC和SEM对酚醛复合材料进行结构、性能与形貌测试,研究离子液体种类对木粉液化率及酚醛树脂性能的影响.结果表明,离子液体及其液化木粉产物制备的酚醛复合材料性能得到明显改善.[Ce MIM]Cl液化效果最好,90℃液化率高达24.6%,当[Ce MIM]Cl与木粉质量比为10∶1时,制备的酚醛复合材料的游离醛释放量由原来的3.64%降低到0.92%.离子液体[Ae MIM]Br能将酚醛复合材料的冲击强度由原来的0.93 k J/m2提高到6.96 k J/m2,而[Ae MIM]Br及其液化的木粉产物制备的酚醛复合材料拉伸强度从原来的3.28 MPa提高到9.70 MPa.     

Disordered kalsilite KAlSiO4

The X‐ray powder diffraction pattern that corresponds to the disordered state of kalsilite (potassium aluminium orthosilicate), KAlSiO₄, is investigated. The directionality of (Al,Si)O₄ tetrahedra within single six‐membered tetrahedral ring building units (S6R) could not be defined. With equal probability for the directionality of each tetrahedra within one S6R [free apex pointing up (U) or down (D)], an undefined sequence of U and D directionalities is needed to describe the S6R building units. The extinction conditions of disordered kalsilite are also different compared to ordered kalsilite within the space group P6₃. In disordered kalsilite, h0l and hhl reflections with l = 2n + 1 are systematically absent.     

Crystal Structure of LiRh-type IrZn Determined by Powder X-ray and Selected Area Electron Diffraction

The LiRh-type crystal structure of the equiatomic intermetallic compound IrZn turns out to be a competitor to the otherwise energetically favored CsCl-type structures of congeneric transition metal zinc phases, thus enlightening the structural impact of element-specific factors beyond the Hume-Rothery concept.     

Crystal structures of two isostructural compounds: a second polymorph of dipotassium hydrogen citrate,K2HC6H5O7, and potassium rubidium hydrogen citrate,KRbHC6H5O7

The crystal structures of a new polymorph of dipotassium hydrogen citrate, 2K⁺·HC₆H₅O₇^2?, and potassium rubidium hydrogen citrate, K⁺·Rb⁺·HC₆H₅O₇^2?, have been solved and refined using laboratory powder X‐ray diffraction and optimized using density functional techniques. In the new polymorph of the dipotassium salt, KO₇ and KO₈ coordination polyhedra share corners and edges to form a three‐dimensional framework with channels parallel to the a axis and [111]. The hydrophobic methylene groups face each other in the channels. The un‐ionized carboxylic acid group forms a strong charge‐assisted hydrogen bond to the central ionized carboxylate group. The hydroxy group forms an intermolecular hydrogen bond to a different central carboxylate group. In the potassium rubidium salt, the K⁺ and Rb⁺ cations are disordered over two sites, in approximately 0.72:0.28 and 0.28:0.72 ratios. KO₈ and RbO₉ coordination polyhedra share corners and edges to form a three‐dimensional framework with channels parallel to the a axis. The un‐ionized carboxylic acid group forms a strong charge‐assisted hydrogen bond to an ionized carboxylate group. The hydroxy group forms an intermolecular hydrogen bond to the central carboxylate group. Density functional theory (DFT) calculations on the ordered cation structures suggest that interchange of K⁺ and Rb⁺ at the two cation sites changes the energy insignificantly.     

Tin powder‐promoted diastereoselective allylation of chiral acylhydrazones

An efficient method for the allylation of chiral acylhydrazones derived from aldehydes has been developed to give the corresponding allylic hydrazides in good yields and diastereoselectivities. The method uses a combination of tin powder and allylic bromide as allylation system, which avoids the use of toxic allylic stannanes while retaining their merits.     

Powder‐XRD and 14N magic angle‐spinning solid‐state NMR spectroscopy of some metal nitrides

Some metal nitrides (TiN, ZrN, InN, GaN, Ca₃N₂, Mg₃N₂, and Ge₃N₄) have been studied by powder X‐ray diffraction (XRD) and ¹⁴N magic angle‐spinning (MAS) solid‐state NMR spectroscopy. For Ca₃N₂, Mg₃N₂, and Ge₃N₄, no ¹⁴N NMR signal was observed. Low speed (ν_r = 2 kHz for TiN, ZrN, and GaN; ν_r = 1 kHz for InN) and ‘high speed’ (ν_r = 15 kHz for TiN; ν_r = 5 kHz for ZrN; ν_r = 10 kHz for InN and GaN) MAS NMR experiments were performed. For TiN, ZrN, InN, and GaN, powder‐XRD was used to identify the phases present in each sample. The number of peaks observed for each sample in their ¹⁴N MAS solid‐state NMR spectrum matches perfectly well with the number of nitrogen‐containing phases identified by powder‐XRD. The ¹⁴N MAS solid‐state NMR spectra are symmetric and dominated by the quadrupolar interaction. The envelopes of the spinning sidebands manifold are Lorentzian, and it is concluded that there is a distribution of the quadrupolar coupling constants Q_cc's arising from structural defects in the compounds studied. Copyright © 2015 John Wiley & Sons, Ltd.