Comparative characterization of thermal isomerization rates of 6‐phenyl‐1,5‐diazabicyclo[3.1.0]hexane at convection and microwave heating

Rate constants of thermal isomerization of 6‐phenyl‐1,5‐diazabicyclo[3.1.0]hexane into 1‐(benzyl)‐4,5‐dihydro‐1H‐pyrazole at convection and microwave heating in toluene and chlorobenzene (solvents) were determined within the temperature range 90°C to 120°С. These data were used for the calculation of activation parameters of isomerization. It is shown that microwave heating increases the rate constants at the same temperature by a factor of 2 to 2.5 as compared with those using convection heating. The reason is that the effective temperature of microwave heating exceeds that of convection heating by 6°C to 9°С in toluene and by 12°C to 20°С in chlorobenzene as solvent.     

CCD与CMOS像素传感器γ射线电离辐射响应特性对比研究

为了研究CCD与CMOS像素传感器对γ射线电离辐射的响应差异,对比研究了4类像素传感器的结构特点和辐射响应特性。通过辐射实验,对各传感器在不同辐射水平条件下的光子响应事件分布、平均灰度值以及典型光子响应事件进行研究。研究结果表明：光子响应程度均与辐射剂量率相关;CCD像素传感器的沟道传输方式使每列像元间的辐射响应更容易相互干扰;平均灰度值随剂量率的增大存在明显的梯度,各积分周期内输出信号灰度值围绕均值上下波动,CCD像素传感器输出信号灰度浮动范围较小;CMOS像素传感器各像元对光子的响应更加明显,CCD像素传感器各像元的响应信号易与相邻像元发生串扰;各类像素传感器典型辐射响应事件区域中发生光子响应的像元数量随剂量率的增大而增多,响应事件并非单个光子的行为,而是反映了多个光子在区域内同时沉积能量的过程。本研究为开发像素传感器的γ射线辐射探测技术和应用提供了重要的理论分析和实验数据支撑。     

Microwave‐Assisted Synthesis of Biocompatible Silk Fibroin‐Based Carbon Quantum Dots

A biocompatible silk fibroin‐based carbon quantum dot (SF‐CQD) is first synthesized under microwave irradiation for a short time. This fast and environmentally safe technique produce well‐defined nanosized SF‐CQDs. The SF‐CQDs have good crystallinity, a strong emission peak in the blue‐color region, high quantum yield, and the potential for modification with various functional groups on the surface. These SF‐CQDs demonstrate stable emission, good water dispersity, low toxicity, and good biocompatibility. These properties show the great potential of these SF‐CQDs for use in biomedical applications including bioimaging, biosensing, and drug delivery systems.     

锁频锁相的高功率微波器件技术研究

综述了中国工程物理研究院应用电子学研究所锁频锁相的高功率微波器件最新研究成果,主要包括稳频稳相的相对论速调管放大器和注入锁相的相对论返波管振荡器.针对高功率长脉冲相对论速调管研究中遇到的问题,介绍了该放大器的束波互作用特点、杂频振荡抑制、脉冲缩短、高频段高功率运行、高增益等物理、设计与实验中的关键技术研究概况,使其功率、相位稳定性、增益等性能有了显著提高,S波段环形单注相对论速调管实现了高功率稳相输出,重频25 Hz运行时输出功率大于1 GW,脉宽大于150 ns、相位波动18°,高增益运行时在注入微波功率数kW条件下也实现类似功率和相位水平;采用同轴多注器件结构,突破了速调管高频段运行条件下高效率电子束引入和高功率束波转换技术等难题,使X波段相对论速调管在注入功率30 kW条件下实现了功率大于1 GW的放大输出,效率为34%,相位波动为15°.在掌握相对论返波管技术的基础上,利用返波管的高效率和结构紧凑的优点,开展了注入调制电子束锁相的相对论返波管研究,采用百kW级的种子微波实现了对GW量级输出微波的相位锁定.该研究结果对功率合成、粒子加速和多功能雷达等技术具有重要的推动作用.     

金纳米四面体增强有机太阳电池光吸收及光伏性能研究

为增强有机太阳能电池的光利用率,提高能量转换效率,本文合成了金四面体形状的纳米粒子,并用聚苯乙烯磺酸钠(PSS)包裹形成了核壳结构的金纳米四面体(Au@PSS tetrahedra NPs).将其掺杂到有机太阳能电池空穴提取层与活性层的界面处,利用表面等离子体共振效应来增强活性层对光的吸收,从而提高有机太阳能电池的能量转换效率.研究了掺杂浓度和PSS包裹厚度对电池性能的影响.结果表明:掺杂浓度为6%时,器件性能最佳,能量转换效率达到3.08%; PSS壳层厚度优化为2.5 nm时,转换效率达到3.65%,较标准电池提升了22.9%.电池性能的改善主要源于金四面体纳米粒子的共振吸收峰位于给体材料吸收谱范围内,纳米粒子的共振促进了给体的吸收,同时PSS壳层的引入促进了激子的解离和电荷的转移,上述因素的改善提升了电池的短路电流、填充因子和转换效率.     

微波法热处理制备CaO-MgO-Al2O3-SiO2系微晶玻璃的研究

以二氧化硅,三氧化二铝,氧化钙和氧化镁为主要原料,分别采用微波辐射和传统电加热制备了一系列CaO-MgO-Al2O3-SiO2 (CMAS)系微晶玻璃材料,对比两种方法的热处理制度对微晶玻璃结构与性能的影响,并进一步讨论了微波非热效应的影响.利用DTA、XRD、SEM和综合力学性能仪等手段,研究了两种对该系微晶玻璃显微结构及性能的影响.实验结果表明,两种方法制备的微晶玻璃主晶相均为辉石相,力学性能也基本相当.与传统热处理方法相比,微波法可在更短时间内制备出性能较好的微晶玻璃材料,微波非热效应有助于降低其晶化温度.     

Microwave Assisted Benign Method of Chelating Resin Synthesis Having Different Thermal and Ion Exchange Properties

Summary: Microwave irradiation method was used for synthesis of chelating ion exchange resin derived fom Salicylicacid-Formaldehyde-Resorcinol (SFR-M). The resin was characterized by Elemental analysis, FTIR, TGA and SEM. The Broido and Horowitz-Metzger method were used to calculate the energy of activation (Ea) from TGA. The microwave assisted chelating resin has different thermal behaviour as compared to conventional resin (SFR-C). The sorption capacities of microwave SFR resin for transition metal ions are higher than conventional SFR resin. The separation of binary mixtures [Cu (II) and Zn (II)] in brass and [Ni (II) and Cd (II)] were successfully carried out using Kd value.     

Simulation design of P–I–N-type all-perovskite solar cells with high efficiency

According to the good charge transporting property of perovskite, we design and simulate a p–i–n-type all-perovskite solar cell by using one-dimensional device simulator. The perovskite charge transporting layers and the perovskite absorber constitute the all-perovskite cell. By modulating the cell parameters, such as layer thickness values, doping concentrations and energy bands of n-, i-, and p-type perovskite layers, the all-perovskite solar cell obtains a high power conversion efficiency of 25.84%. The band matched cell shows appreciably improved performance with widen absorption spectrum and lowered recombination rate, so weobtain a high J_(sc) of 32.47 m A/cm~2. The small series resistance of the all-perovskite solar cell also benefits the high J_(sc). The simulation provides a novel thought of designing perovskite solar cells with simple producing process, low production cost and high efficient structure to solve the energy problem.     

Lowering the driving voltage and improving the luminance of blue fluorescent organic light-emitting devices by thermal annealing a hole injection layer of pentacene

We chose pentacene as a hole injection layer (HIL) to fabricate the high performance blue fluorescent organic light-emitting devices (OLEDs). We found that the carrier mobility of the pentacene thin films could be efficiently improved after a critical annealing at temperature 120 °C. Then we performed the tests of scanning electron microscopy, atomic force microscopy, and Kelvin probe to explore the effect of annealing on the pentacene films. The pentacene film exhibited a more crystalline form with better continuities and smoothness after annealing. The optimal device with 120 ℃ annealed pentacene film and n-doped electron transport layer (ETL) presents a low turn-on voltage of 2.6 V and a highest luminance of 134800 cd/m² at 12 V, which are reduced by 26% and improved by 50% compared with those of the control device.