氯代膦烯化合物与零价钯的氧化加成反应机理探讨

与氯代烯烃或芳烃相反, 氯代膦烯与零价钯的氧化加成反应可以在温和条件下进行. 提出了可能的反应机理. 起始卤代膦烯的结构决定了反应历程和最终产物的结构.     

白藜芦醇分子的转动惯量和电偶极矩

通过分子轨道理论和杂化轨道理论推断出较稳定的白藜芦醇分子是平面型分子,然后根据白藜芦醇分子结构特点计算了该化合物的一种稳定异构体的转动惯量,用矢量合成法计算了其电偶极矩,为微波辅助白藜芦醇萃取理论研究提供转动惯量和电偶极矩的数据.     

Solid-supported Hantzsch—Biginelli reaction for syntheses of pyrimidine derivatives

The microwave-assisted dry media technology was utilized for the synthesis of some novel derivatives in the Hantzsch—Biginelli reaction. In this eco-friendly approach, the usage of organic solvents and hazardous reagents resulting in corrossion of materials was minimized, giving high yields of products within a short reaction time.     

Micro construction of poly(epsilon-caprolactone)/poly(L-lactic acid) blend film by solution casting under microwave irradiation

The micro construction of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) blend films fabricated by solution casting under microwave irradiation was investigated by selective enzymatic degradation and scanning electron microscopy (SEM). The results were totally different from the blends obtained by conventional methods. The blend was more homogeneous and the PCL continuous phase more compact as no spherulites and tiny zone separation were observed from the film surface and no PCL network was observed inside the film, and the degradation of a PCL plank by Pseudomonas lipase was significantly retarded. The distributed PLLA micro spheres were enlarged and amorphous. The thermal behavior of the blend by microwave heating revealed that PCL and PLLA underwent a melting process, which induced the variations of the PCL phase and PLLA spheres. The weight loss caused by degradation of the PCL/PLLA blend obtained by conventional methods (B50c) is greater than that of the blend obtained by microwave methods (B50m), which reflects the change in morphology from a loose PCL network (B50c) to a dense PCL plank (B50m).     

微波辐射下无催化剂一锅法合成N-甲基十氢吖啶-1,8-二酮化合物

为了研究从简单易得的原料在无催化剂的条件下一锅法合成N-甲基十氢吖啶-1,8-二酮化合物，我们以各类醛（脂肪醛、芳香醛、二醛）、达咪酮或1,3-环己二酮和甲胺为原料，以乙二醇或水为溶剂，经微波辐射，一步反应得到了一系列N-甲基十氢吖啶-1,8-二酮化合物。反应时间从传统热反应的4-5小时缩短至2-10分钟，产率较高（56-95%），并且不需要使用催化剂。该反应后处理方便，只需要简单洗涤，环境友好，为合成此类化合物提供了一种简便、有效的合成方法。该方法不仅适用于一元脂肪醛、芳香醛，还适用于芳香二醛，因此可以合成含有一个或两个十氢吖啶结构单元的杂环化合物。     

自组装合成纳米复合TiO2-ZnO介孔材料及其光催化性能

以TiCl₄, ZnSO₄•7H₂O为原料, 尿素为沉淀剂, 利用可溶性淀粉大分子链的空间位阻效应和高分子网络的阻隔作用, 以纳米级碳黑为模板, 采用微波加热、均相沉淀法合成出了一系列纳米TiO₂-ZnO复合介孔材料. XRD分析证明反应前驱体为非晶态, 500 ℃以上转变为锐钛矿结构的TiO₂和ZnTiO₃, 当Ti∶Zn＝1(摩尔比)时, 产物全部为ZnTiO₃ (TiO₂•ZnO). TEM形貌观察结合N₂吸附表明, 基本粒子为球形, 粒径15～20 nm. 最可几孔径8～10 nm. EDS分析证明产品中Ti∶Zn的分析测定值与实际的投料值基本一致, 并且掺杂均匀性好. 光吸收及光催化实验发现Zn含量为50%时, 光催化效果最好, 在日光照射90 min后, 此TiO₂-ZnO复合材料对藏蓝染料溶液降解率可达到100%, 其光催化反应符合一级动力学方程.     

Organosoluble and transparent polyimides derived from alicyclic dianhydride and aromatic diamines

Organosoluble polyimides were synthesized with the alicyclic dianhydride 1,8‐dimethylbicyclo[2,2,2]oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride and aromatic diamines. The polyimides possessed good solubility both in strong dipolar solvents and in common solvents; the thermal decomposition temperature of the polyimides exceeded 420 °C. Strong and flexible films of the polyimides, with the cutoff of ultraviolet–visible absorption lower than 310–320 nm, exhibited good features as the alignment layers for nematic liquid crystals with pretilt angles of 1.5–2.9°. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 110–119, 2002     

微波辐射下三组分“一锅法”合成5-芳基-1,5,6,7,8,9-六氢化-2H-吡唑[5,4-b]并喹啉-6-酮

在微波辐射下以芳醛、1,3-环己二酮或达米酮和氨基吡唑为原料, 用乙二醇作能量转移剂, 三组分“一锅法”快速合成了一系列吡唑[5,4-b]并喹啉类化合物. 该方法速度快(30～90 s), 产率高(88%～98%), 环境友好. 产物结构通过红外光谱、核磁共振谱和元素分析证实, 化合物4e的单晶经X射线衍射分析, 进一步确证了产物结构.     

微波消解-氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞

采用微波消解进行样品前处理，以硫脲为预还原剂，用氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞。测定砷和汞的线性范围均为0～8μg／L，砷、汞的检出限分别为0．005、0．076μg／L，测定结果的相对标准偏差分别为4.96％～7．38％、2．94％～7．20％(n=6)，回收率分别为92．0％～103．2％、92．0％～98.0％。     

Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.