Thermodynamic quantities for the interaction of SO 4 2− with H+ and Na+ in aqueous solution from 150 to 320°C

The aqueous reactions,

Method to determine quadruple points of a two-component system containing a simple hydrate phase and behavior of the system near these points

A method for determining quadruple points of a two-component system containing a simple hydrate phase is proposed. This method utilizes the quasi-static change of the system along three-phase equilibrium lines and was proved to be able to determine the quadruple points as accurately as the conventional method. By using this method, even though some preparation is necessary, a quadruple point can be determined in just a single experimental run. The behavior of the system near the quadruple points was also examined experimentally, for both the quasi-static and the irreversible change cases. At the quadruple points, the temperature and pressure of the system were kept constant for a while, as at the triple point of water. In both cases, the representative point of the state of the system passed through the quadruple point on a p–T diagram.     

Characterization of a convection-based support microstructure through a flow resistance parameter

Modern convection-based supports differ substantially in pore size, porosity, and microstructure topology. Due to such variability, it is challenging to evaluate the contribution of a particular microstructure topology on flow resistance. We demonstrated that the flow resistance parameter ($\varphi$) introduced decades ago can be used as a criterion to evaluate the effect of microstructure topology on a pressure drop when the pore size is used as a characteristic support dimension. Furthermore, the $\varphi$ value of simple cubic packing was calculated over the entire range of open porosity and compared to the $\varphi$ values determined for pressure drop models derived for particular convection-based supports and experimental values of various convection-based supports from the literature. It was shown that different convection-based supports become clustered into distinct groups when plotted according to their $\varphi$ and open porosity values, allowing their discrimination.     

聚合物与有机染料多层复合膜电致发光颜色的直流电压调制

聚合物与有机染料多层复合膜电致发光颜色的直流电压调制马於光，薛善华，黄劲松，田文晶，刘式墉，沈家骢，刘晓冬（吉林大学分子光谱与分子结构开放实验室，集成光电子学国家重点实验室，长春，１３００２３）（白求恩医科大学，长春，１３００２３）关键词聚合物，发光...     

Controlled ring‐opening polymerization of propylene oxide catalyzed by double metal‐cyanide complex

A double metal‐cyanide catalyst based on Zn₃[Co(CN)₆]₂ was prepared. This catalyst is very effective for the ring‐opening polymerization of propylene oxide. Polyether polyols of moderate molecular weight having low unsaturation (<0.015 meq/g) can be prepared under mild conditions. The molecular weight of polymer is entirely controlled by a reacted monomer‐to‐initiator ratio. The polymers prepared with stepwise addition of monomer exhibit a narrower molecular weight distribution as compared with those prepared with one‐step addition of monomer. Various compounds containing active hydrogen, except basic compounds and low‐carbon carboxylic acid, may be used as initiators. The reaction rate increases with increasing catalyst amount and decreases with rising initiator concentration. Polymerization involves a rapid exchange reaction between the active species and the dormant species. It was also proven that, to a certain extent, the chain termination of this catalytic system is reversible or temporary. ¹³C NMR analysis showed that the polymer has a random distribution of the configurational sequences and head‐to‐tail regiosequence. It is assumed that the polymerization proceeds via a cationic coordination mechanism. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1142–1150, 2002     

Thermal characteristics of polyurethane foams incorporated with phase change materials

Thermal energy storage plays an important role in heat management because of the demand for developed energy conservation, and has applications in diverse areas, from building heating/cooling systems which enable solar energy incorporation into the structure, to textiles and clothings providing an enhanced thermal comfort. In this study, we aimed to improve thermal characteristics of polyurethane rigid foams that have been widely used for thermal insulation as the ultimate energy savers due to their ability to form sandwich structures with various facer materials. Through a laboratory-scale work, two paraffin waxes acting as phase change materials, namely n-hexadecane and n-octadecane, each of which is capable of managing large heat storage/release, were directly incorporated into the polyurethane foams at different ratios. Polymerization modified by means of n-alkane addition could be achieved without any adverse effect. In order to determine both structural and thermal characteristics, seven types of foams produced were examined by FT-IR, SEM, DSC analyses, calorimeter bomb and mechanical tests. Results show that polyurethane foams can be designed as thermal insulators equipped with an improved buffering function against temperature changes.     

Preparation and Characterization of Microencapsulated Hexadecane Used for Thermal Energy Storage

Polyurea microcapsules about 2.5μm in diameter containing phase change material for thermal energy storage application were synthesized and characterized by interfacial polycondensation method with toluene-2,4-diisocyanate and ethylenediamine as monomers in an emulsion system. Hexadecane was used as a phase change material and OP, which is nonionic surfactant, and used as an emulsifier. The chemical structure and thermal behavior of the microcapsules were investigated by FTIR and thermal analysis respectively. The results show encapsulated hexadecane has a good potential as a solar energy storage material.     

Structural Efficiency and Microstructural Modeling of Wet Gels and Aerogels

We present a microstructural model of aerogels that includes the effect of particle necks, tortuosity and dangling ends on the scaling of elastic moduli with density. Relative neck radii can be determined for sintering series of silica aerogels and for Resorcinol Formaldehyde (RF) aerogels produced with different catalyst concentrations. The density of elastically ineffective dangling ends and the tortuosity can be estimated using information from thermal conductivity and elastic modulus measurements in silica aerogels. Typical values for the load bearing mass range from >50% for high density and heat treated aerogels to <10% of the total mass for low density wet-gels.     

The effect of pressure on the dissociation constant of hydrofluoric acid and the association constant of the NaF ion pair at 25°C

The effect of pressure on the dissociation constant of hydrofluoric acid was determined by using the indicator technique at 25°C at an ionic strength of 0.1m over a pressure range of 1 to 2000 atm. A value of 3.14 for pK _a ^* at I =0 was obtained by extrapolation to zero ionic strength at 1 atm. The pressure dependence yielded a partial molar volume change of –9.6 cm³-mol^–1 and a compressibility change of — 35×10^–3 cm³-mol^–1 –atm^–1 for the dissociation. The dependence of ionic strength on the association constant K _A ^* of NaF was studied at 25°C and 1 atm. Extrapolation to I=0 yielded a pK _A ^* of –0.78. The pressure dependence of K _A ^* gave a change of volume of 3.26 cm³-mol^–1 and a change in compressibility of 6×10^–3 cm³-mol^–1-atm^–1 for the formation of the ion pair.