Non‐Lithography Hydrodynamic Printing of Micro/Nanostructures on Curved Surfaces

A key issue of micro/nano devices is how to integrate micro/nanostructures with specified chemical components onto various curved surfaces. Hydrodynamic printing of micro/nanostructures on three‐dimensional curved surfaces is achieved with a strategy that combines template‐induced hydrodynamic printing and self‐assembly of nanoparticles (NPs). Non‐lithography flexible wall‐shaped templates are replicated with microscale features by dicing a trench‐shaped silicon wafer. Arising from the capillary pumped function between the template and curved substrates, NPs in the colloidal suspension self‐assemble into close‐packed micro/nanostructures without a gravity effect. Theoretical analysis with the lattice Boltzmann model reveals the fundamental principles of the hydrodynamic assembly process. Spiral linear structures achieved by two kinds of fluorescent NPs show non‐interfering photoluminescence properties, while the waveguide and photoluminescence are confirmed in 3D curved space. The printed multiconstituent micro/nanostructures with single‐NP resolution may serve as a general platform for optoelectronics beyond flat surfaces.     

In‐situ preparation of porous monolithic polymer inside hollow fiber as a micro‐solid phase extraction device for glucocorticoids in cosmetics

Glucocorticoids have a certain whitening effect on the skin. However, frequent and long‐term use of cosmetics including glucocorticoids is harmful to health. Herein, we proposed a novel micro‐solid phase extraction method for the detection of prednisolone acetate, prednisone, and prednisolone in cosmetics coupled with high‐performance liquid chromatography. In this method, porous monolithic polymer micro‐extraction bars were prepared by “one‐step, one‐pot” in situ photopolymerization combined with sacrificial support in hollow fiber under water atmosphere. The crucial factors such as pH of sample solution, extraction, and elution times that influence micro‐extraction were optimized and found to be 9.0, 2 h, and 32 min, respectively. Under the optimum experimental conditions, the linear range of the calibration curves were from 5.0 to 2000 µg/L with correlation coefficients (R²) between 0.9922 and 0.9996. The limit of detection and limit of quantification were 1.5 µg/L and 5.0 µg/L, respectively, and the recoveries were found to be in range of 69.0–113.3%. The analysis of precision for intraday and interday were less than 10.40 and 10.59%. The device has been successfully achieved photopolymerization under water atmosphere. The results indicated that this method is simple, accurate, and satisfactory for the pretreatment and determination of glucocorticoids in complex cosmetics samples.     

微钢管内部强迫对流换热的实验研究

本文对以蒸馏水为工质,流过内径和外径分别为168μm、406μm和399μm、798μm的电加热不锈钢管时的换热进行了实验研究。通过对微钢管直接通电进行加热,并采用红外成像仪及专用放大镜头的非接触式方法,获得了各种恒定加热功率及不同雷诺数下的微钢管壁面的温度场分布,进而得到较为精确的壁面平均温度。由此计算了在层流态下的换热系数Nu数。实验结果表明,在层流下,内径为168μm及399μm的微钢管内部的Nu数分别比经典的Hansen准则式所得到的Nu数高出很多。     

水平微细圆管内膜状凝结换热特性的研究

实验研究了微细圆管内凝结换热特性,实验中采用四种不锈钢管,其内径范围为289-997μm。基于实验结果, 分析了换热温差、蒸汽进口雷诺数Rein和管径对管内膜状凝结换热系数的影响,发现温差对管内膜状凝结换热的影响很小, Nu随蒸汽进口雷诺数Rein增加而增大,随管径减小而降低,而对流换热系数随管径减小而显著增大。     

基于微燃机的HAT循环变工况性能分析

基于某微燃机构建了HAT循环,研究了其在功率下降(ISO条件)、环境温度变化时的变工况性能,并与简单循环、回热循环和RWI(注水回热)循环的设计工况、变工况性能进行了对比。结果表明, HNI、循环和RWI循环的变工况性能相似且好于简单循环和回热循环。其中,空气湿化程度的调整对于HAT循环变工况性能的稳定性起重要作用。但由于没有设置中冷器,且微燃机循环中可资利用的(火用)较少,HAT循环设计工况和变工况性能相对于其它循环的优势没有得到充分体现。     

Hydrodynamic instability of premixed flame propagating in narrow planar channel in the presence of gas flow

The paper analyses the hydrodynamic instability of a flame propagating in the space between two parallel plates in the presence of gas flow. The linear analysis was performed in the framework of a two-dimensional model that describes the averaged gas flow in the space between the plates and the perturbations development of two-dimensional combustion wave. The model includes the parametric dependences of the flame front propagation velocity on its local curvature and on the combustible gas velocity averaged along the height of the channel. It is assumed that the viscous gas flow changes the surface area of the flame front and thereby affects the propagation velocity of the two-dimensional combustion wave. In the absence of the influence of the channel walls on the gas flow, the model transforms into the Darrieus–Landau model of flame hydrodynamic instability. The dependences of the instability growth rate on the wave vector of disturbances, the velocity of the unperturbed gas flow, the viscous friction coefficients and other parameters of the problem are obtained. It is shown that the viscous gas flow in the channel can lead, in some cases, to a significant increase in instability compared with a flame propagating in free space. In particular, the instability increment depends on the direction of the gas flow with respect direction of the flame propagation. In the case when the gas flow moves in the opposite direction to the direction of the flame propagation, the pulsating instability can appear.     

Determination of the second step microstructure for superhydrophobic surfaces

A selection of suitable microstructures is critical to fabrication and properties of superhydrophobic surfaces (SHS). In this study, we introduce a three‐dimensional droplet model to thermodynamically analyze the superhydrophobic properties for the purpose of determining the second step of a two‐step microstructure suitable for the SHS based on the common models within the reach of the existing macro‐machining technology. It is found that a sinusoidal microstructure is the most suitable, followed by a cone frustum and a prism in the composite wetting state, as well as the transition from hydrophilic to hydrophobic depends basically on the solid fraction rather than non‐determinative surface microscopic topography. The predictions of the model are found in quite good agreement with the experimental observations. This study will facilitate fabrication of the SHS on how to select the suitable morphology. Copyright © 2012 John Wiley & Sons, Ltd.     

微气相色谱法分析氢氘同位素组分气体

该文建立了聚变堆燃料循环系统中氢氘组分的微气相色谱定量分析方法。采用MnCl2溶液改性的氧化铝色谱柱(4～6 m×0.53 mm)为分离柱,考察了改性液含量、色谱柱长和载气流量对氢氘组分分析的影响,在液氮低温(77 K)条件下实现了H₂、HD和D₂混合物的分离。结果表明,19%MnCl2溶液处理的色谱柱分离氢同位素的效果优于15%MnCl₂溶液处理的色谱柱;柱越长,H₂和HD的分离效果越好,当色谱柱长度大于5 m时,H2和HD组分可以完全分离,分离度大于1.5;HD和D2的最小理论塔板高度分别为0.013 cm和0.016 cm。He中H2、HD、D23组分氢同位素在0%～10%含量范围内的线性相关系数均不低于0.993,检出限(LOD)分别为600.1、343.8、654.5μL/L。方法的相对标准偏差为0.34%～1.5%。该法是一种快速、准确、实用的氢同位素分析方法,有望用于聚变堆D/T燃料循环系统氢同位素气体的测定。     

有机过氧化物的热自燃性小药量评价法

有机过氧化物的热自燃性小药量评价法;有机过氧化物;热自燃危险性;自加速分解温度;微量量热仪     

微粉型四钼酸铵热容的测定

Single phase of ammonium tetramolybdate in the micro power form was prepared from polyphase ammonium paramolybdate. Its heat capacity from 14.25℃ to 120.12 ℃ was measured by drop method and the result is
Cp=0.3936+7.4047×10-4T+6.3543×10-3T-2(J•K-1•g-1)