Self-consistent relativistic effective core potentials for transition metal atoms: Cu,Ag, and Au

A development of the RECP method for the case of transition and rare earth elements is suggested. New terms with projectors on the occupation numbers ofd andf outermost shells respectively (which can be determined in SCF iterations) are added to the standard RECP operator and the corresponding self-consistent RECP terms are generated for atoms Cu, Ag and Au. Significant improvement is achieved in reproduction of atomic excitation energies as compared with the conventional shape-consistent RECP calculation.     

Ion chromatographic determination of alkali and alkaline earth metals in mineral waters

Summary The rapid, simultaneous, suppressed ion chromatographic determination of alkali, alkaline earth metals and ammonium in highly mineralized waters has been examined using the novel cation exchange IonPac CS12 column. General ability for the determination of lithium, sodium, ammounium, potassium, magnesium, calcium and strontium in concentrations from a few g to several mg per liter was studied. The relative standard deviations of retention times of all seven cations were below 0.7% and the relative standard deviations of the measurements of peak areas and peak heights were mostly below 5%. Six natural mineral waters of different types were selected for evaluation of the method. It was not possible to determine lithium in the one run and ammonium usually partially coelutes with sodium precluding quantitative determination. Strontium was undetectable because of the necessary dilutions. All the reltionships between peak areas and concentrations or peak height and concentrations were linear and there was also no evidence of the effect of different matrices on the slope of regression lines.     

High-temperature TG/DSC/QMS applications in environmental protection

The decomposition reactions of polystyrene, phenolic resin and a protective undercoating material for automobiles which contains PVC were tested using a new type of thermal analysis — mass spectrometry coupling system for measurements to 1500C or 2000C, which is based on the principle of a two-step skimmer orifice system. The results will be presented, with particular emphasis on the detection sensitivity of the new system for the products of decomposition.The capability of this coupling system to detect even heavy metals such as lead and silver in the waste gases from decomposition or after evaporation at high temperatures will also be demonstrated.     

Bond-length fluctuations in transition-metal oxoperovskites

Bond-length fluctuations in transition-metal oxoperovskites may give rise to two-phase fluctuations in what appears to be a single phase to a diffraction experiment. Orbital disorder at Jahn-Teller ions results in bond-length fluctuations that give 3D-ferromagnetic, vibronic Mn(III)-O-Mn(III) superexchange interactions and allow disproportionation into Mn(IV) and Mn(II) in LaMnO₃; where orbitally ordered and disordered phases coexist, an external magnetic field stabilizes the orbitally disordered, ferromagnetic phase relative to the orbitally ordered, antiferromagnetic phase. Spin-lattice interactions in the paramagnetic phase of charge-transfer compounds give bond-length fluctuations arising from the semicovalent component of the superexchange interactions. At the crossover from localized to itinerant electronic behavior, the coexistence of two-phase fluctuations has been demonstrated in both the single-valent RNiO₃ family (R=rare-earth, A=alkaline-earth) and the mixed-valent R_0.5A_0.5MnO₃ perovskites. “Bad-metal” behavior is found to be associated with bond-length fluctuations.     

Effect of 1,10-phenanthroline on the extraction and separation of lithium(I), sodium(I) and potassium(I) with thenoyltrifluoroacetone

The extraction of Li⁺ with thenoyltrifluoroacetone (Htta) in the presence of 1,10-phenanthroline (phen) has been studied in various organic solvents. The remarkable enhancement of the extraction of Li⁺, that is a synergistic effect, was observed by the addition of phen, and the high extractability of Li⁺ was attained in toluene, benzene, chlorobenzene and o-dichlorobenzene. The extraction equilibrium of Li⁺, Na⁺ and K⁺ (denoted as M⁺) in the presence or absence of phen in chlorobenzene and the adduct formation reaction in the organic phase were studied in detail. The adduct of Li⁺ was Li(tta)(phen) in the wide concentration range of phen in the organic phase, while in Na⁺ and K⁺ M(tta)(phen)₂ also exists in the high concentration region. The maximum value of the separation factor between Li⁺ and Na⁺ was observed in the present system and was larger than that in the Htta-trioctylphosphine oxide (TOPO)-benzene system reported previously.     

Application of laser ablation–inductively coupled plasma-mass spectrometry (LA–ICP–MS) to investigate trace metal spatial distributions in human tooth enamel and dentine growth layers and pulp

Human tooth enamel provides a nearly permanent and chronological record of an individuals nutritional status and anthropogenic trace metal exposure during development; it might thus provide an excellent bio archive. We investigated the micro-spatial distribution of trace metals (Cu, Fe, Mg, Sr, Pb, and Zn) in 196×339 m² raster pattern areas (6.6×10⁴ m²) in a deciduous tooth using laser ablation-inductively coupled plasma-mass spectrometry (LA–ICP–MS). Ablated areas include prenatal and postnatal enamel, the neonatal line, the dentine–enamel junction (DEJ), dentine, and the dentine–pulp junction. Topographic variations in the surface elemental distribution of lead, zinc, strontium, and iron intensities in a deciduous tooth revealed heterogeneous distribution within and among regions. ⁴³Ca normalized elemental intensities showed the following order: Sr>Mg>>Zn>Pb>Fe>Cu. Elevated zinc and lead levels were present in the dental pulp region and at the neonatal line. This study demonstrates the ability of LA–ICP–MS to provide unique elemental distribution information in micro spatial areas of dental hard tissues. Elemental distribution plots could be useful in decoding nutrition and pollution information embedded in their bio apatite structure.Presented in part at the 2002 Winter Conference on Plasma Spectrochemistry, Scottsdale, AZ, January 6–12, 2002. The poster was selected as an outstanding poster presentation.     

Determination of platinum-group metals and lead in vegetable environmental bio-monitors by voltammetric and spectroscopic techniques: critical comparison

This paper reports voltammetric sequential determination of Pt(II), Pd(II), and Rh(III), by square-wave adsorption stripping voltammetry (SWAdSV), and Pb(II), by square-wave anodic stripping voltammetry (SWASV), in vegetable environmental matrices. Analytical procedures were verified by the analysis of the standard reference materials: Olive Leaves BCR-CRM 062 and Tomato Leaves NIST-SRM 1573a. Precision and accuracy, expressed as relative standard deviation and relative error, respectively, were always less than 6% and the limits of detection (LOD) for each element were below 0.096 g g^–1. Once set up on the standard reference materials, the analytical procedure was transferred and applied to laurel leaves sampled in proximity to a superhighway and in the Po river mouth area. A critical comparison with spectroscopic measurements is discussed.     

三正辛胺(TOA)分离贵金属的系统研究 Ⅰ.反相萃取色层法分离七个贵金属

本文系统详细地研究了七种贵金属彼此分离以及与贱金属分离的可能条件。此种工作尚未见报道。用三正辛胺作固定相。分别用1mol/L HCl、6mol/LHCl、2mol/L HNO_3—2mol/L HCl、3mol/L HNO_3-2mol/L HCl、4mol/L HNO_3-2mo1/L HCl和5％硫脲-1mol/L HCl为淋洗液,可以将Rh、Ru、Pd、Pt、Ir、Os、Au分步淋洗下来,达到彼此完全分离。为了使Rh(Ⅱ)与贱金属分离,必须将RhC1_6~(3-)转化为RhBrb_6~(3-),然后在另一色层柱上使它与贱金属分离。合成矿样的分析结果符合分析要求。     

Synthesis, characterisation and thermal behaviour of solid state compounds of 4-methylbenzylidenepyruvate with some bivalent metal ions

Solid state M-4-Me-BP compounds, where M stands for bivalent Mn, Fe, Co, Ni, Cu, Zn, Pb and 4-Me-BP is 4-methylbenzylidenepyruvate, have been synthesized. Simultaneous thermogravimetry-differential thermal analysis (TG-DTA), differential scanning calorimetry (DSC), X-ray powder diffractometry, infrared spectroscopy, elemental analysis, and complexometry were used to characterise and to study the thermal behaviour of these compounds. The results led to information about the composition, dehydration, thermal stability and thermal decomposition of the isolated complexes.     

Coadsorption of carbofuran and lead at the water/silica interface. Possible impact on environment

Despite its extremely weak adsorption at the water/silica interface, carbofuran can, however, induce the coadsorption of metallic salts, like, for example, lead nitrate, and thus enhance its adsorption. We quantitatively studied this phenomenon with a depletion method and under concentration conditions close to the environmental ones. Heavy metal salt was found to positively adsorb, whereas carbofuran relative adsorption is generally slightly negative. This study provides evidence that considering these facts is of paramount importance in environmental prospects. To cite this article: G. Elmanfe et al., C. R. Chimie 9 (2006).